Platinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN. Released
|
|
- Margarethe Bauer
- vor 7 Jahren
- Abrufe
Transkript
1 Platinum DRAGON white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SN Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion Typischer Lichtfluss: 75 lm bei 7 ma Besonderheit des Bauteils: hocheffiziente Lichtquelle bei geringem Platzbedarf Farbort: x =,33, y =,33 nach CIE 1931 (weiß) typische Farbtemperatur: 56 K Farbwiedergabeindex: 8 Abstrahlwinkel: Lambertscher Strahler (12 ) Technologie: ThinGaN optischer Wirkungsgrad: 3 lm/w Gruppierungsparameter: Lichtstrom, Farbort Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet Lötmethode: IR Reflow Löten Vorbehandlung: nach JEDEC Level 2 Gurtung: 24-mm Gurt mit 8/Rolle, ø18 mm ESD-Festigkeit: ESD-sicher bis 2 kv nach JESD22-A114-D Anwendungen Außen- und Innenbeleuchtung im Automobilbereich (z.b. Scheinwerfer) Blitzlicht Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) Leselampen (Flugzeug, Auto, Bus) Ersatz von Kleinst-Glühlampen Fassadenbeleuchtung im Innen- und Außenbereich Display Hinterleuchtung mit hohem Helligkeitsbedarf z. B. TFT Dekorative Beleuchtung Signal- und Symbolleuchten zur Orientierung Markierungsbeleuchtung (Stufen, Fluchtwege, u.ä.) Features package: white SMD package, colorless clear silicone resin; chip level conversion typical Luminous Flux: 75 lm at 7 ma feature of the device: high efficient lightsource at low space color coordinates: x =.33, y =.33 acc. to CIE 1931 (white) typ. color temperature: 56 K color reproduction index: 8 viewing angle: Lambertian Emitter (12 ) technology: ThinGaN optical efficiency: 3 lm/w grouping parameter: luminous flux, color coordinates assembly methods: suitable for all SMT assembly methods soldering methods: IR reflow soldering preconditioning: acc. to JEDEC Level 2 taping: 24 mm tape with 8/reel, ø18 mm ESD-withstand voltage: up to 2 kv acc. to JESD22-A114-D Applications exterior and interior automotive lighting (e.g. front light) Flashlight backlighting (illuminated advertising, general lighting) reading lamps (aircraft, car, bus) substitution of micro incandescent lamps indoor and outdoor commercial and residential architectural lighting display backlight where high brightness is required e.g. TFT decorative and entertainment lighting signal and symbol luminaire for orientation marker lights (e.g. steps, exit ways, etc.)
2 Bestellinformation Ordering Information Typ Emissionsfarbe 1) Seite 18 Lichtstrom 2) Seite 18 Lichtstärke Bestellnummer Type Color of Emission Luminous 1) page 18 Flux Luminous 2) page 18 Intensity Ordering Code I F = 7 ma Φ V (mlm) I F = 7 ma I V (mcd) LW W5SN-KYLY-5K8L white (typ.) Q6511A8262 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LW W5SN-KYLY-5K8L bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen KY, KZ, LX oder LY enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LW W5SN-KYLY-5K8L bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -5K, -5L, -6K, -6L, -7K, -7L, -8K oder -8L enthalten ist (siehe Seite 5 für nähere Information). Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LW W5SN-KYLY-5K8L means that only one group KY, KZ, LX or LY will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LW W5SN-KYLY-5K8L means that only 1 chromaticity coordinate group -5K, -5L, -6K, -6L, -7K, -7L, -8K or -8L will be shippable on each reel (see page 5 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable
3 Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (T A =25 C) Stoßstrom Surge current t 1 μs, D =.5, T A =25 C Sperrspannung Reverse voltage (T A =25 C) Leistungsaufnahme Power consumption (T A =25 C) 4) Seite 18 Wärmewiderstand 4) page 18 Thermal resistance Sperrschicht/Lötpad Junction/solder point (min.) (max.) Symbol Symbol Wert Value T op C T stg C T j >15 for short C term applications T j 125 C I F I F 1 1 Einheit Unit ma ma I FM 25 ma V R not designed for reverse operation P tot 4.6 W R th JS 11 K/W V
4 Kennwerte Characteristics (T A = 25 C) Bezeichnung Parameter 5) Seite 18 Farbkoordinate x nach CIE 1931 (typ.) Chromaticity coordinate x acc. to CIE 1931 I F = 7 ma 5) Seite 18 Farbkoordinate y nach CIE 1931 (typ.) Chromaticity coordinate y acc. to CIE 1931 I F = 7 ma 5) page 18 5) page 18 Symbol Symbol Wert Value x.33 y.33 Einheit Unit Abstrahlwinkel bei 5 % Ι V (Vollwinkel) (typ.) 2ϕ 12 Grad Viewing angle at 5 % Ι V deg. 6 Seite 18) Durchlassspannung (min.) 6) page 18 Forward voltage (typ.) I F = 7 ma (max.) Sperrstrom not designed for Reverse current (max.) I R reverse operation Temperaturkoeffizient von V F Temperature coefficient of V F I F = 7 ma; 1 C T 1 C Optischer Wirkungsgrad Optical efficiency I F = 7 ma (typ.) (typ.) V F V F V F V V V μa TC V 4.5 mv/k η opt 3 lm/w
5 5) Seite 18 Farbortgruppen 5) page 18 Chromaticity coordinate groups Cy E Cx Cy L 5K L 6K + 7L 7K Cx 8L 8K OHA13327 Gruppe Group Cx Cy Gruppe Group Cx Cy 5K K L L K K L L
6 Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group KY KZ LX LY 1) Seite 18 Lichtstrom Luminous Flux Φ V (mlm) ) page 18 2) Seite 18 Lichtstärke Luminous Intensity I V (mcd) 3 (typ.) 35 (typ.) 4 (typ.) 47 (typ.) 2) page 18 Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: KZ-6K Example: KZ-6K Helligkeitsgruppe Brightness Group KZ Farbortgruppe Chromaticity Coordinate Group Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 6K
7 2) Seite 18 Relative spektrale Emission 2) page 18 Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Φ rel = f (λ); T A = 25 C; I F = 7 ma 1 % OHL12811 Φ rel 8 V λ ) Seite 18 Abstrahlcharakteristik Radiation Characteristic Ι rel = f (ϕ); T A = 25 C nm 8 λ 2) page OHL166 ϕ
8 2) Seite 18 Durchlassstrom 2) page 18 Forward Current I F = f (V F ); T A = 25 C 2) 7) Seite 18 Relative Lichtstrom Relative Luminous Flux Φ V /Φ V(7 ma) = f (I F ); T A = 25 C 2) 7) page 18 I F 1 3 ma 5 OHL252 Φ Φ V 2 V (7 ma) OHL V ma 1 3 V F I F 2) Seite 15 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (I F ); T A = 25 C ΔCx, ΔCy.5 2) page 15 OHL286 2) Seite 15 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (T j ); I F = 7 ma ΔCx,.1 ΔCy.6 2) page 15 OHL Cy Cx ma 12 IF C 1 T j
9 2) Seite 15 Relative Vorwärtsspannung 2) page 15 Relative Forward Voltage ΔV F = V F - V F(25 C) = f(t j ); I F = 7 ma ΔV F.4 V OHL288 2) Seite 15 Relative Lichtstrom Relative Luminous Flux Φ V /Φ V(25 C) = f (T j ); I F = 7 ma Φ V 1.4 Φ V (25 C) 2) page 15 OHL C 1 T j C 1 T j
10 Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T S ) 11 ma I F OHL 2) Seite 18 Exemplarische durchschnittliche Lebensdauer für mittlere Helligkeitsgruppe 2) page 18 Exemplary median Lifetime for median Brightness Group Bedingungen Conditions I F = 5 ma T S = 25 C I F = 7 ma T S = 85 C mittlere Einheit Lebensdauer median Unit Lifetime 25. Betriebsstunden operating hours 11. Betriebsstunden operating hours *The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures.the median lifetime depends on the application 1 Do not use current below 1 ma C T S Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 25 C I F 3. A 2.5 D = t P T t P T OHL3993 I F Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 85 C I F 3. A 2.5 D = t P T t P T OHL3994 I F D = D = t p 1 1 s t p 1 1 s
11 8) Seite 18 Maßzeichnung 8) page 18 Package Outlines...1 (.4) A C Heat sink Protection Diode 6.2 (.244) 5.8 (.228) 4.25 (.167) 4.15 (.163) ø.81 (.31) ø.73 (.28) (R.85 (.33)) 1.9 (.75) 1.7 (.67) 5.35 (.21) 5.25 (.26) Cathode 11.2 (.441) 1.8 (.425) 1.2 (.47).8 (.31) (ø4.2 (.165)) 1.1 (.43).9 (.35) 2. (.79) 1.6 (.63).29 (.11).24 (.9).65 (.26).45 (.18) 7.2 (.283) 6.8 (.268) GPLY6147 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 2 mg 8) Seite 18 Gurtung / Polarität und Lage Verpackungseinheit Method of Taping / Polarity and Orientation 8) page 18 Packing 8/Rolle, ø18 mm unit 8/reel, ø18 mm Cathode/Collector Side 4 (.157) 1.55 (.61) 2 (.79) 1.75 (.69) 11.5 (.453) 12.4 (.488) 24 (.945).3 (.12).3 (.12) 7.35 (.289) 6.35 (.25) 8 (.315) 1.9 (.75) OHAY
12 8) Seite 18 Empfohlenes Lötpaddesign IR 8) page 18 Recommended Solder Pad IR Reflow Löten Reflow Soldering Achtung: Anode und Heatsink sind elektrisch verbunden 3 Lötstellen 3 solder points Thermisch optimiertes PCB Thermal enhanced PCB Attention: Anode and Heatsink are electrically connected 1.6 (.63) 11.6 (.457) Footprint 2.3 (.91) ø4. (.157) Heatsink attach 12. (.472) Empfohlene Padgeometrie 11.6 (.457) Recommended Solder Pad Design.3 (.12) 2.3 (.91) 1 (.394) ø4. (.157) ø2.5 (.98) Lötstopplack Solder resist Lötpasten Schablone Solder paste stencil Bare Copper Freies Kupfer Kupfer Copper 1.6 (.63) OHPY
13 Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil für bleifreies Löten IR Reflow Soldering Profile for lead free soldering (nach J-STD-2B) (acc. to J-STD-2B) T 3 C C 24 C 217 C Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile 1 s min 3 s max OHLA687 + C 26 C -5 C 245 C ±5 C +5 C 235 C - C s max 1 s max Ramp Down 6 K/s (max) 1 5 Ramp Up 3 K/s (max) 25 C s 3 t Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning
14 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Semiconductors (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Bar Code (X) PROD NO: Product Code (9D) D/C: Date Code (Q)QTY: Product Quantity per Reel Bar Code Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: RoHS Compliant ML 2 Temp ST 26 C RT (G) GROUP: X - X - X Sample Additional TEXT R77 DEMY PACKVAR: Packing Type Forward Voltage Group Wavelength Group Brightness Group OHA1243 Gurtverpackung Tape and Reel W 1 D P P 2 F E W A N 13. ±.25 P 1 Label Direction of unreeling W 2 Direction of unreeling Gurtvorlauf: Leader: Gurtende: Trailer: 4 mm 4 mm 16 mm 16 mm OHAY324 Tape dimensions in mm (inch) W P P 1 P 2 D E F ±.1 (.157 ±.4) 8 ±.1 (.315 ±.4) 2 ±.1 (.79 ±.4) ( ) 1.75 ±.1 (.69 ±.4) 11.5 ±.1 (.453 ±.4) Reel dimensions in mm (inch) A W N min W 1 W 2 max 18 (7) 24 (.945) 6 (2.362) ( ) 3.4 (1.197)
15 _< C). _< _< C). 11 _< (9D) D/C: 144 Bin2: Q-1-2 Bin3: ML Temp ST 2 22 C R 2a Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. LW W5SN Trockenverpackung und Materialien Dry Packing Process and Materials OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% 1% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, 15% examine units, if necessary bake units WET 11 (9D) D/C: 144 Bin2: Q-1-2 Bin3: ML Temp ST 2 22 C R 2a CAUTION LEVEL If blank, see bar code label This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM Anm.: Note: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials OHA539 Barcode label Barcode label CAUTION LEVEL This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours If blank, see bar code label OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2 LSY T676 Multi TOPLED Bin1: P C R 3 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2 LSY T676 Multi TOPLED Bin1: P C R 3 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Packing Sealing label OHA
16 Revision History: Previous Version: Page Subjects (major changes since last revision) Date of change 1, 13 OS-IN (Introduction of Jedec Level 2) , 6 ordering code changed Anm.: Gemäß IEC (EN ) gilt für weiß: Anm.: According IEC (EN ) for white: LED RADIATION DO NOT STARE INTO BEAM CLASS 2 LED PRODUCT LED STRAHLUNG NICHT DIREKT IN DEN STRAHL BLICKEN LED KLASSE 2 OHW2885 OHW
17 Patent List Patent No. US US US Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 9) page 18 may only be used in life-support devices or systems 1 ) page 18 with the express written approval of OSRAM OS
18 Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) - 4) Montage auf PC-Board - Metallkernplatine, Fläche 95 mm², λ = 1,3 W/(m*K). Für weitere Informationen siehe Applikationsschrift im Internet ( 5) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±.1 ermittelt. 6) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Maße werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 1) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%. 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) - 4) Mounted on PC board - metall core PCB, area of 95 mm², λ = 1.3 W/(m*K). For further Information please find the application note on our web site ( 5) Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±.1. 6) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±.1 V. 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). 9) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 1) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-9349 Regensburg All Rights Reserved
19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Osram Opto Semiconductor: LW W5SN-JYKZ-5K8L-Z LW W5SN-KYLY-5K8L
Opto Semiconductors. White LED
Hyper TOPLED White LED Vorläufige Daten / Preliminary Data Besondere Merkmale GaN-Technologie Farbe: weiß x =.3, y =.32 nach CIE1931 Abstrahlcharakteristik: Lambertscher Strahler (12 ) ESD-sicher bis 2
MehrCHIPLED LG N971, LY N971
CHIPLED LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126 Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm Wellenlänge: 57 nm (grün), 587 nm (gelb) Abstrahlwinkel: Lambertscher
MehrHyper TOPLED White LED LW T676. Vorläufige Daten / Preliminary Data
Hyper TOPLED White LED LW T676 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen
MehrOpto Semiconductors. Vorläufige Daten / Preliminary Data
CHIPLED Vorläufige Daten / Preliminary Data Besondere Merkmale SMT-Gehäusetyp: 63 Farben: grün (572 nm), gelb (59 nm) Abstrahlcharakteristik: extrem breit (16 ) Industriestandard bzgl. Lötpadraster geringe
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrGolden DRAGON ARGUS with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5KM. Released
Golden DRAGON ARGUS with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5KM Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, farbloser klarer Silikon - Verguss mit ARGUS
MehrGolden Dragon Lead (Pb) Free Product - RoHS Compliant LW W5SG. Vorläufige Daten / Preliminary Data
Golden Dragon Lead (Pb) Free Product - RoHS Compliant LW W5SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, farbiger diffuser Silikon - Verguss Besonderheit des
MehrGolden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM. Released
Golden DRAGON with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LW W5SM Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level conversion
MehrTOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770
TOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: Bauteil wird top-down montiert und strahlt durch das PCB, deshalb ideal
MehrPlatinum DRAGON warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5SN. Released
Platinum DRAGON warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5SN Released Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, Chip level
MehrLC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269. Nicht für Neuentwicklungen / Not for New Designs
LC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269 Nicht für Neuentwicklungen / Not for New Designs Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses SOT-23 Gehäuse Besonderheit des
MehrFIREFLY 0402 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW VH8G
FIREFLY 42 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW VH8G Besondere Merkmale Gehäusetyp: SMT Gehäuse, Standard SMT Footprint 42, farbiger diffuser Verguss Besonderheit des Bauteils: kompakte
Mehr3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 LY 3360, LG 3360, LP 3360
3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 Besondere Merkmale eingefärbtes, diffuses Gehäuse als optischer Indikator einsetzbar Lötspieße mit Aufsetzebene gegurtet lieferbar Störimpulsfest nach
MehrTOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674
TOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971
CHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm
MehrFIREFLY 0402 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F. Vorläufige Daten / Preliminary Data
FIREFLY 42 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMT Gehäuse, Standard SMT Footprint 42, farbloser
MehrGolden Dragon LB W5SG, LV W5SG. Vorläufige Daten / Preliminary Data
Golden Dragon LB W5SG, LV W5SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute
MehrTOPLED High-optical Power LED (HOP) LS T675. Vorläufige Daten / Preliminary Data
TOPLED High-optical Power LED (HOP) LS T675 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad
MehrHyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 080 Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,2 mm x 0,8 mm Wellenlänge: 633 nm (super-rot), 606
MehrMini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670
Mini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm Wellenlänge: 628 nm (super-rot),
MehrHyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform
Mehr5 mm (T1 ¾) LED, Diffused LR 5360, LS 5360, LY 5360, LG 5360
mm (1 ¾) LED, Diffused LR 36, LS 36, LY 36, LG 36 Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses mm (1 ¾) Gehäuse Besonderheit des Bauteils: Lötspieße mit Aufsetzebene Wellenlänge: 64 nm (rot),
MehrSchmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 5441
Schmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 544 Wesentliche Merkmale SFH 5440: Ausgang active low SFH 544: Ausgang
MehrHyper CHIPLED Hyper-Bright LED LB Q993
Hyper CHIPLED Hyper-Bright LED LB Q993 Abgekündigt nach OS-PD-23-7 - wird durch LB L293 ersetzt werden Obsolete acc. to OS-PD-23-7 - will be replaced by LB L293 Besondere Merkmale Gehäusetyp: SMT Gehäuse
MehrAdvanced Power TOPLED Plus Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LCW G5GP. Released
Advanced Power TOPLED Plus Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LCW G5GP Released Besondere Merkmale Gehäusetyp: weißes PLCC-4 Gehäuse, klarer Silikon - Verguss
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LR W5AP, LA W5AP, LY W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant LR W5AP, LA W5AP, LY W5AP Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon - Verguss,
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Chipgröße
MehrSFH Features Especially suitable for applications from 740 nm to 1100 nm 5 mm LED plastic package Integrated NTC thermistor, R 25 =10kΩ
Silizium-PIN-Fotodiode mit integriertem Temperatur-Sensor Silicon PIN Photodiode with integrated Temperature Sensor Lead (Pb) Free Product - RoHS Compliant SFH 54 Wesentliche Merkmale Speziell geeignet
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, eingefärbter diffuser Silikon - Verguss Besonderheit
MehrMicro SIDELED Enhanced optical Power LED (ATON ) LW Y87C. Vorläufige Daten Preliminary Data
Micro SIDELED Enhanced optical Power LED (AON ) LW Y87C Vorläufige Daten Preliminary Data Besondere Merkmale Gehäusetyp: weißes SM Gehäuse Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik;
MehrInfrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281
Infrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281 Not for new design Replacement: SFH4253 R Wesentliche Merkmale Emissionswellenlänge 88 nm Homogene Abstrahlcharakteristik Anwendungen
MehrCHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LG Q976. Vorläufige Daten / Preliminary Data
CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LG Q976 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: 63, farbloser, transparenter Verguss Besonderheit des Bauteils:
MehrHyper Mini TOPLED Enhanced optical Power LED (ATON ) LW M67C
Hyper Mini TOPLED Enhanced optical Power LED (ATON ) LW M67C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version.
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971. Released
CHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971 Released Besondere Merkmale Gehäusetyp: 63, farbloser diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,6
MehrSOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
MehrGolden Dragon 1 Watt LED LA W57B, LY W57B
Golden Dragon 1 Watt LED LA W57B, LY W57B Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf Wellenlänge: 617
MehrHyper SIDELED Enhanced optical Power LED (ATON ) Lead (Pb) Free Product - RoHS Compliant LW A67C
Hyper SIDELED Enhanced optical Power LED (ATON ) Lead (Pb) Free Product - RoHS Compliant LW A67C Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbiger diffuser Verguss Besonderheit des Bauteils:
MehrInfrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281
Infrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281 Wesentliche Merkmale Emissionswellenlänge 88 nm Homogene Abstrahlcharakteristik Anwendungen Miniaturlichtschranken für Gleich-
MehrLeistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 4209
Leistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 429 Wesentliche Merkmale Leistungsstarke GaAs-LED (4mW) Hoher Wirkunsgrad bei kleinen Strömen Typische Peakwellenlänge 95nm Anwendungen
MehrIR-Lumineszenzdiode (940 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (940 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4239
IR-Lumineszenzdiode (94 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (94 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4239 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Niedriger
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4230
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 423 Wesentliche Merkmale Punktlichtquelle mit hohem Wirkungsgrad bei
Mehr650nm Resonant Cavity LED-Chip 650nm Resonant Cavity LED Die F372A. Vorläufige Daten / Preliminary Data
65nm Resonant Cavity LED-Chip 65nm Resonant Cavity LED Die F372A Vorläufige Daten / Preliminary Data Besondere Merkmale keine Schwelle hohe Leistung Kurze Schaltzeiten: 15ns Oberflächenstrahler Optimale
MehrMicro SIDELED 0.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y2SG
Micro SIDELED.8mm long life Enhanced optical Power LED Lead (Pb) Free Product - RoHS Compliant LW Y2SG abgekündigt nach PDN 29-6 / discontinued acc. PDN 29-6 Vorläufige Daten / Preliminary Data Besondere
MehrMicro SIDELED Enhanced optical Power LED (ATON ) LW Y87C
Micro SIDELED Enhanced optical Power LED (ATON ) LW Y87C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere
MehrGolden DRAGON Plus with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LUW W5AM. Vorläufige Daten / Preliminary Data
Golden DRAGON Plus with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LUW W5AM Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon
MehrTOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG. Not for new design-ins acc.
TOPLED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LUW T6SG Not for new design-ins acc. OS-NFND-212-4 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse,
MehrGolden DRAGON Lead (Pb) Free Product - RoHS Compliant LA W57B, LY W57B
Golden DRAGON Lead (Pb) Free Product - RoHS Compliant LA W57B, LY W57B Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Punktlichtquelle mit hoher
MehrHyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW A6SG
Hyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW A6SG Released Abkündigung nach OS-PD-29-9 Obsolete acc. to OS-PD-29-9 Besondere Merkmale Gehäusetyp:
MehrPower TOPLED Hyper-Bright LED LY E675
Power TOPLED Hyper-Bright LED LY E675 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad; höhere Umgebungstemperatur bei gleichem
MehrHyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333
Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333 Abgekündigt nach OS-PD-21-1 - wird nicht ersetzt werden. obsolete acc. to OS-PD-21-1 - no replacement.
MehrOSLUX, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant LUW F65N. Released
OSLUX, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: SMD Gehäuse mit Optik Besonderheit des Bauteils: hocheffiziente Lichtquelle
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4236
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4236 Vorläufige Daten / Preliminary Data Wesentliche Merkmale max.
MehrGolden DRAGON with Lens Enhanced Optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW W55M. Vorläufige Daten / Preliminary Data
Golden DRAGON with Lens Enhanced Optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LW W55M Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer
MehrHyper PointLED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG P47K. Vorläufige Daten / Preliminary Data
Hyper PointLED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG P47K Vorläufige Daten / Preliminary Data reverse mount top mount Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse,
MehrHyper TOPLED Enhanced optical Power LED (ATON ) LW T67C. Vorläufige Daten / Preliminary Data
Hyper TOPLED Enhanced optical Power LED (ATON ) LW T67C Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, farbiger diffuser Verguss Besonderheit des Bauteils: extrem
MehrMicro SIDELED Enhanced optical Power LED (NOTA ) LW Y87G. Vorläufige Daten / Preliminary Data
Micro SIDELED Enhanced optical Power LED (NOTA ) LW Y87G Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse Besonderheit des Bauteils: kleine Bauform mit extrem breiter
MehrMini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870
Mini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870 Nicht für Neuentwicklungen - wird durch Micro SIDELED ersetzt werden Not for new designs - will be replaced by Micro SIDELED Besondere Merkmale
MehrDiamond DRAGON Lead (Pb) Free Product - RoHS Compliant LUW W5AP. Vorläufige Daten / Preliminary Data
Diamond DRAGON Lead (Pb) Free Product - RoHS Compliant LUW W5AP Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: schwarzes SMD-Gehäuse, farbloser klarer Silikon-Verguss, Silikon-Linse;
MehrHyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LW Vorläufige Daten / Preliminary Data
Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LW 3333 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: nicht eingefärbtes, klares 3 mm (T1) Gehäuse Besonderheit des Bauteils: enge
MehrSmartLED Lead (Pb) Free Product - RoHS Compliant LW L28G
SmartLED 63 Lead (Pb) Free Product - RoHS Compliant LW L28G Besondere Merkmale Gehäusetyp: SMT Footprint 63, farbiger diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,7 x,8 x,65 mm (LxBxH);
MehrHyper SIDELED White Hyper-Bright LED LW A673
Hyper SIDELED White Hyper-Bright LED LW A673 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere Merkmale
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrSilizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21
Silizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 350 nm bis 820 nm Angepaßt
MehrCeramic TopLooker for high light output, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant LW C9SP CERAMOS TM.
Ceramic TopLooker for high light output, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant CERAMOS TM released Abkündigung nach OS-PD-28-8 Obsolete acc. to OS-PD-28-8 Besondere
MehrHyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LW Vorläufige Daten / Preliminary Data
Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LW 3333 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: nicht eingefärbtes, klares 3 mm (T1) Gehäuse Besonderheit des Bauteils: enge
MehrBLUE LINE TM Hyper SIDELED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB A676
BLUE LINE TM Hyper SIDELED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB A676 Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Abstrahlung
MehrSilicon Photodiode for the Visible Spectral Range Silicon Photodiode for the Visible Spectral Range Lead (Pb) Free Product - RoHS Compliant BPW 21
Silicon Photodiode for the Visible Spectral Range Silicon Photodiode for the Visible Spectral Range Lead (Pb) Free Product - RoHS Compliant BPW 21 Wesentliche Merkmale Speziell geeignet für Anwendungen
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter SFH 409
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter SFH 49 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Hohe Impulsbelastbarkeit Gute spektrale Anpassung an Si-Fotoempfänger
MehrHyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333
Hyper 3 mm (1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW 3333 Vorläufige Daten für OS-PCN-24-5-A / Preliminary Data for OS-PCN-24-5-A Besondere Merkmale Gehäusetyp:
MehrBLUE LINE TM Hyper SIDELED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB A676
BLUE LINE TM Hyper SIDELED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB A676 Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Abstrahlung
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrMulti SIDELED Bright Green Die Lead (Pb) Free Product - RoHS Compliant LSG A671. Nicht für Neuentwicklungen Not for new designs
Multi SIDELED Bright Green Die Lead (Pb) Free Product - RoHS Compliant LSG A671 Nicht für Neuentwicklungen Not for new designs Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss
MehrPointLED Enhanced Thinfilm LED Lead (Pb) Free Product - RoHS Compliant LS P47F, LR P47F, LA P47F, LY P47F. Vorläufige Daten / Preliminary Data
PointLED Enhanced Thinfilm LED Lead (Pb) Free Product - RoHS Compliant LS P47F, LR P47F, LA P47F, LY P47F reverse mount top mount Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes
MehrMulti TOPLED Cathodes On One Side Lead (Pb) Free Product - RoHS Compliant LSG T677
Multi TOPLED Cathodes On One Side Lead (Pb) Free Product - RoHS Compliant LSG T677 LSG T677 abgekündigt nach OS-PD-26-9 - wird durch LSG T676 ersetzt werden. LSG T677 obsolete acc. to OS-PD-26-9 - will
MehrSchnelle PIN-Fotodiode High Speed PIN-Photodiode Lead (Pb) Free Product - RoHS Compliant SFH 2701
Schnelle PIN-Fotodiode High Speed PIN-Photodiode Lead (Pb) Free Product - RoHS Compliant SFH 7 Wesentliche Merkmale Speziell geeignet für Anwendungen von 4nm bis 5nm Sehr kurze Schaltzeit im spezifizierten
MehrSilizium-Fotodiode Silicon Photodiode BPW 33
Silizium-Fotodiode Silicon Photodiode BPW 33 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 35 nm bis 11 nm Sperrstromarm (typ. 2 pa) DIL-Plastikbauform mit hoher Packungsdichte
MehrSFH Not for new design
GaAlAs-IR-Lumineszenzdiode (88 nm) und grüne GaP-LED (6 nm) GaAlAs-Infrared-Emitter (88 nm) and GaP-LED (6 nm) Lead (Pb) Free Product - RoHS Compliant SFH 7222 Not for new design Wesentliche Merkmale SM-Gehäuse
MehrOSLUX TM, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant LW F65G. Vorläufige Daten / Preliminary Data
OSLUX TM, designed for camera flash application Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Gehäuse mit Optik Besonderheit des Bauteils:
MehrSilizium-PIN-Fotodiode; in SMT und als Reverse Gullwing Silicon PIN Photodiode; in SMT and as Reverse Gullwing BPW34, BPW34S, BPW34S (R18R)
Silizium-PIN-Fotodiode; in SMT und als Reverse Gullwing Silicon PIN Photodiode; in SMT and as Reverse Gullwing BPW34, BPW34S, BPW34S (R18R) BPW 34 BPW 34 S Wesentliche Merkmale Speziell geeignet für Anwendungen
MehrPower TOPLED High-optical Power LED (HOP) LS E675, LA E675, LY E675
Power TOPLED High-optical Power LED (HOP) LS E675, LA E675, LY E675 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad; höhere
MehrSilizium-PIN-Fotodiode Silicon PIN Photodiode BPX 61
Silizium-PIN-Fotodiode Silicon PIN Photodiode BPX 61 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 4 nm bis 1 nm Kurze Schaltzeit (typ. 2 ns) Hermetisch dichte Metallbauform (ähnlich
MehrHyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LB A6SG, LT A6SG
Hyper SIDELED long life Enhanced optical Power LED (ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LB A6SG, LT A6SG Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse,
MehrTOPLED LS T670, LO T670, LY T670, LG T670, LP T670
TOPLED LS T670, LO T670, LY T670, LG T670, LP T670 Besondere Merkmale Gehäusetyp: weißes P-LCC-2-Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrHyper SIDELED Enhanced optical Power LED (ATON ) LW A67C
Hyper SIDELED Enhanced optical Power LED (ATON ) LW A67C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. The product itself will remain within RoHS compliant version. Besondere
MehrSmartLED TM Enhanced optical power LED (ATON ) LW L88C
SmartLED M Enhanced optical power LED (AON ) LW L88C Abgekündigt nach OS-PD-23-7 - wird durch LW L283 ersetzt werden Obsolete acc. to OS-PD-23-7 - will be replaced by LW L283 Besondere Merkmale Gehäusetyp:
MehrHyper 3 mm (T1) LED, Diffused Hyper-Bright, Wide-Angle LED Lead (Pb) Free Product - RoHS Compliant LS 3386
Hyper 3 mm (T1) LED, Diffused Hyper-Bright, Wide-Angle LED Lead (Pb) Free Product - RoHS Compliant LS 3386 Abgekündigt nach OS-PD-2-1 - wird nicht ersetzt werden. obsolete acc. to OS-PD-2-1 - no replacement.
MehrGolden DRAGON Lead (Pb) Free Product - RoHS Compliant LD W5SM, LB W5SM, LT W5SM. Released
Golden DRAGON Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss Typischer Lichtfluss: 34 mw (tief blau); 19 lm (blau);
MehrSilizium-PIN-Fotodiode mit sehr kurzer Schaltzeit Silicon PIN Photodiode with Very Short Switching Time SFH 229 SFH 229 FA
Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit Silicon PIN Photodiode with Very Short Switching Time Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 380 nm bis 1100 nm () und bei
MehrUV-Lumineszensdiode UV Light Emitting Diode SFH Vorläufige Daten / Preliminary Data
UV-Lumineszensdiode UV Light Emitting Diode SFH 484 Vorläufige Daten / Preliminary Data Wesentliche Merkmale UV-LED mit Emissionswellenlänge 395nm Enger Abstrahlwinkel Hermetisch dichtes Gehäuse ESD-Festigkeit
MehrSuper SIDELED High-Current LED LG A672, LP A672
Super SIDELED High-Current LED LG A672, LP A672 Abgekündigt nach PD_78_2 - werden durch LG A676 und LP A676 ersetzt werden Obsolete acc. to PD_78_2 - will be replaced by LG A676 and LP A676 Besondere Merkmale
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: extrem
MehrLC 5 mm (T1 ¾) LED, Diffused Low Current LED LS 5469, LY 5469, LG 5469
LC mm (T1 ¾) LED, Diffused Low Current LED LS 469, LY 469, LG 469 Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses mm (T1 ¾) Gehäuse Besonderheit des Bauteils: hohe Lichtstärke bei kleinen Strömen;
MehrHyper Mini TOPLED Hyper-Bright LED LB M673, LV M673, LT M673. Vorläufige Daten / Preliminary Data
Hyper Mini TOPLED Hyper-Bright LED LB M673, LV M673, LT M673 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse Besonderheit des Bauteils: kleine Bauform für Anwendungen
MehrMulti TOPLED Bright Green Die LOG T671, LSG T671
Multi TOPLED Bright Green Die LOG T671, LSG T671 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-2-. The product itself will remain within RoHS compliant version. Besondere Merkmale
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter LD 274-3
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter LD 274 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Gute spektrale Anpassung an Si-Fotoempfänger Gehäusegleich mit SFH 484
Mehr1) Seite 21. Lichtstrom. Luminous Flux. I F = 350 ma Φ V (mlm)
Golden DRAGON ARGUS with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5KM Nicht für Neuentwicklungen / Not for New Designs Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse,
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676. Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, farbloser klarer Verguss
BLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant SFH 4511
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant SFH 4511 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad 5mm Kunststoffgehäuse Peakwellenlänge 95 nm Sehr
MehrMulti TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T770. Abkündigung nach OS-PD Obsolete acc. to OS-PD
Multi TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T77 Abkündigung nach OS-PD-21-24 Obsolete acc. to OS-PD-21-24 Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit
Mehr