Interface: RS485: Modbus RTU other interfaces on request Semiconductor: KTY81 Output Switching contact: Relays: 4x changeover (freely programmable)

Transkript

1 Characteristics CHART RECORDER - COLOUR DISPLAY - - Sensor input: 4 / 8 / 12 (analog and digital) - Sensor signal: Current / Voltage / Pulse / RTD - Accuracy: dependent on used s - Display: 7" Touchpanel Colour TFT, transmissive - Output: 4 relays, freely programmable - Supply: VAC / 24 VDC - Interfaces: / - / Ethernet / Serial - Sensor supply: 24 VDC, 130 ma (each ) - Enclosure: Built-on / Flush mounting - Software: for processing the data - Options: Webserver / Statistic module / Measuring rate Technical data Input Sensors: 4, 8, 12 inputs: analog or digital, freely to use Supply: internally or externally Option analog: sampling rate 10 ms Current: Range: ma, ma Resolution: 0,0001 ma Input resistance: 33Ω Voltage: Range: V Resolution: 0,05 mv Input resistance: 100 kω Voltage: Range: V, V Resolution: 0,5 mv Input resistance: 100 MΩ RTD: Sensor: Pt100, Pt1000 Range: C Resolution: 0,1 C Pulse: Pulse length: 100 µs minimum Frequency: khz Voltage: 30 V maximuml Interface: RS485: Modbus RTU Option: other interfaces on request Semiconductor: KTY81 Output Switching contact: Relays: 4x changeover (freely programmable) Contacts: 230 VAC, 6 A Function: Alarm management, collective alarm Sensor signal: Analog current: looped (s with own signal output) The signal is used for the and e.g. for a SPS Interface: Network: TCP/IP RJ45 plug contact RS485: Modbus RTU : stick, cable Applications With its functionality the intelligent chart recorder and data logger is suitable for all applications, where measurement data have to be displayed and recorded continuously. Photo: makrodepecher@pixelio.de Photo: pixelquelle.de Photo: pixelquelle.de Photo: pixelquelle.de Multifunctional data logger Page-1

2 Technical data (continued) Accuracy Sensors: see specification of the Data logger : Current: ±0,003 ma, ±0,05% Voltage: V: ±0,2 mv, ±0,05% V, V: ±2 mv, ±0,05% RTD: Pt100: ±0,2 C ( C) ±0,3 C (other ranges) Pt1000: ±0,2 C ( C) Supply Voltage: Standard: VAC, Hz Option: 24 VDC Sensor supply: 1 integrated power unit: 24 VDC, 25 W, 130 ma max. for each (at 4 inputs) 2 integrated power units: 24 VDC, 25 W, 130 ma max. for each (at 8, 12 inputs) Ambient conditions Temperature: Operation range: C Storage: C Mechanics Enclosure: Type: alucase AC with clip-on design covers Dimensions: 280 x 170 x 90 mm Material: diecast aluminium Mounting: covered screw channels Colour: aluminium white Front foil: Polyester Weigth: 7,3 kg (with options) Cable input: 18 screwed cable glands PG12 (s, supply, alarm relays) 1 screwed cable gland with bend relief (RJ45 Ethernet) Display: Size: 7" Type: TFT transmissive Use: Graphik, curves, statistics Menu languages: german, english Protection: IP 65 Electrical connection: Plug-in terminal strip: 0,2...2,5 mm² (supply, relays) Plug-in terminal strip: 0,14...1,5 mm² (s, interface) Memory card: SD memory: 2 GB (standard) Option: up to 4 GB Options Webserver Software for data evaluation ( version) Software for data evaluaion (Client/Server version) for 5, 10 or 20 Dimensions (in mm) 280 View top 170 View side View front Page-2

3 Overview Relais 1 Relais 2 Relais 3 Relais 4 Home A1 *** Alarm Relais Übersicht *** A2 A3 A4 B1 B2 = Alarm 1 = Alarm 1 Alarm 2 = Alarm 2 B3 B4 Alarm C1 Lg stop Report C2 C3 Interval = 1 C :03:12 Versatility Up to 12 s can be connected to the device. All inputs are freely to use and each is supplied with 24 VDC / 130 ma. Flexibel The data logger is network compatible, so that a worldwide data transmission is possible with the integrated webserver. Alarm relays and fault message Up to 32 threshold values can be configured freely and allocated to 4 different alarm relays. These can be used for collective alarms. Pressure Other s - with RS485 Modbus RTU - with 0(4)...20 ma - with (10) V - with pulse output RTD Pt1000 RTD Screw-in Pt100 Temperature Cable Temperature Humidity Level Flow Possibilities of representation A1 Halle 1.1 Druckluft A2 Halle 1.2 Druckluft A3 Halle 1.3 Druckluft A4 Halle 1.4Druckluft 237, m³ 729, m³ 537, m³ 254, m³ B1 Halle 1.1 stoff B2 Halle 1.2 stoff B3 Halle 1.3 stoff B4 Halle 1.4 stoff Real time measured values All measured values can be seen at a glace. Threshold exceedings are indicated in red colour.a measuring site name can be allocated to each. 337, Nl 657, Nl 15, Nl 237, Nl C1 Halle 1.1 Sauerstoff C2 Halle 1.2 Sauerstoff C3 Halle 1.3 Sauerstoff C4 Halle 1.4 Sauerstoff 17, Nl 37, Nl 223, Nl 75, Nl Page-3

4 < Possibilities of representation (continued) Graphic display This display replaces former evaluation of ordinary paper chart recorders and offers lots of advantages. The time axis can be moved by a finger slide. The zoom function by finger movement enables an analysis of peak values in unique :30 12:35 12: Main Setup < Alarm Log 1 run sec Mem :15:55 90,00 80,00 70,00 60,00 50,00 40,00 30,00 A1 Halle 1.1 Druckluft 237, m³ A2 Halle 1.2 Druckluft 729, m³ A3 Halle 1.3 Druckluft 537, m³ A4 Halle 1.4 Druckluft 245, m³ B1 Halle 1.1 stoff Real time measured values and graph Additionally to the measurement curves the actual value is indicated as well. 20,00 335,5 Nl/min Nl 10,00 B2 Halle 1.2 stoff 0,00 11:56:00 11:58:00 12:00:00 12:02:00 12:04:00 Main Setup #3 Alarm Log 1 stop sec Mem ,4 Nl/min Nl :15:55 Monat Jahr März 2012 Februar 2012 Januar 2012 Dezember 2011 November 2011 Oktober 2011 September 2011 August 2011 Juli 2011 Juni 2011 Mai 2011 April 2011 März 2011 Februar 2011 Monatsverbrauch m³ Kosten 1533 Euro VA 400 Nr. 1 Min-Wert Max-Wert Mittelwert Statistics and reports Different to ordinary chart recorders the offers not only the recording of the measured date but also the evaluation of all consumption es optionally as daily/weekly/monthly report at the push of a button. It is no longer necessary to read out the counter and transfer the values manually into a list. The reports can be imported to every in Excel by means of an stick and after that they can be printed out without any addional software. Main Exportiere Tabelle an - Page-4

5 A1 Halle 1.1 Druckluft 237, m³ A2 Halle 1.2 Druckluft 729, m³ A3 Halle 1.3 Druckluft 537, m³ A4 Halle 1.4 Druckluft 245, m³ B1 Halle 1.1 stoff B2 Halle 1.2 stoff 335,5 Nl/min Nl 685,4 Nl/min Nl Flexible data transfer for each application Data transfer via stick or cable Monat Jahr März 2012 Februar 2012 Januar 2012 Monatsverbrauch Kosten VA 400 Nr. 1 Min-Wert Max-Wert Mittelwert Dezember 2011 November 2011 Oktober 2011 September 2011 August 2011 Juli 2011 Juni 2011 Mai 2011 April 2011 März 2011 Februar m³ 1533 Euro Main Exportiere Tabelle an - If no Ethernet- or Bus connection is existing or if the installation would be too costly the recorded data can be stored onto an stick and transferred to the. The will automatically identify the stick. The user will be guided through the menu Read-out data. The data stored in the stick ca be evaluated comfortably at the by means of the Software. Data transfer, remote maintenance and consumption analysis via webserver and integrated Ethernet interface, RS 485 Modbus RTU 90,00 80,00 70,00 RS 485 Modbus RTU SPS /GLT 60,00 50,00 40,00 Scada System 30,00 20,00 10,00 0,00 11:56:00 12:00:00 11:58:00 12:02:00 12:04:00 Main Setup #3 Alarm Log 1 Mem stop sec :15:55 Ethernet TCP WWW The current measured data and the stored measured data can be transfered via Ethernet or RS 485 (Modbus) The integrated webserver enables the user to read out the measured data via internet.. For the evaluation of the data at the the user can dispose of the comfortable and versatile software, which leaves nothing to be desired. Threshold exceedings can be sent via SMS and . The can be connected via Ethernet / RS 485 to customers own systems (GLT, SPS, Scada). By means of the software the data can be evaluated comfortably. As an alternative the webserver in can be addressed via any web browser. Current measured values and consumption statistics can be transfered via the webserver. Page-5

6 Monat Jahr März 2012 Februar 2012 Januar 2012 Dezember 2011 November 2011 Oktober 2011 September 2011 August 2011 Juli 2011 Juni 2011 Mai 2011 April 2011 März 2011 Februar 2011 Main Monatsverbrauch m³ Kosten 1533 Euro Exportiere Tabelle an - VA 400 Nr. 1 Min-Wert Max-Wert Mittelwert 90,00 80,00 70,00 60,00 50,00 40,00 30,00 20,00 10,00 0,00 11:56:00 11:58:00 12:00:00 12:02:00 12:04:00 Alarm Log 1 Main Setup #3 stop sec A1 Halle 1.1 Druckluft 237, m³ A2 Halle 1.2 Druckluft 729, m³ A3 Halle 1.3 Druckluft 537, m³ A4 Halle 1.4 Druckluft 245, m³ B1 Halle 1.1 stoff 335,5 Nl/min Nl B2 Halle 1.2 stoff Mem ,4 Nl/min Nl :15: :30 12:35 12: Alarm Log 1 Mem Main Setup < run sec :15:55 < Software for client / server solution Transparent measurement data any time at any By means of the client / server software solution an optional number of devices can be evaluated via Ethernet. The software stores the measured data of all cyclically (cycle time freely adjustable) in a SQL data base on the server. In case of an exceeding of the stored alarm values the software automatically sends an SMS or an . Furthermore different user levels can be defined in the server so that single staff members only can access the measured data of certain. The evaluation of the measured can be carried out by means of the client software from each within the company. RJ45 Ethernet Server WWW Function of the server software - Automatic data storage in My SQL data base (cycle time freely programmable) - User administration - Configuration of alarm message and transmission via and SMS - Configuration backup generation Function of the client software - Indication of current measured values - Graphical chart with zoom function - Tabulated representation - Report generation (standard report with min/max values, number of alarm exceedings, moment of alarm exceeding) - Automatic consumption report Page-6

7 More details of the device View of current measurement values - Load background image - Place / fix window with measurement values - Red measurement values in case of alarm - Quick access to measurement history Graphical chart with zoom function - Selection of the measuring channels to be indicated - Easy zoom-in and zoom-out - Up to 8 Y-axis - Quick access to: day view week view month view Consumption analysis For the consumption analysis the module Statistics is necessary. Page-7

8 Order code L M X X X X X X - X X X Input: 4x for analog and digital Sensors 0 8x for analog and digital es 1 12x for analog and digital es 2 Supply: VAC 0 24 VDC 1 Enclosure: Built-on 0 Flush mounting 1 Webserver: Without 0 With 1 Modul statistics: Without 0 With 1 Sampling rate: Standard 0 10 ms 1 Other: Special model 0 Accessories: Basic Software for graphical and tabular data evaluation Order number: Page-8 Subject to change, version