Info Point Current information Info Point No. 4 November 0 Contents Novelties System supplements Trigon... 3. Market launch Trigon D...3. Market launch Trigon Unit L...4 System supplements Lambda Window... 5. Market launch Lambda 77 L opening out...5 3 System supplements Lambda Door... 6 3. New bottom rail profile B8034 for Lambda 77 L fixed fields...6 3. New drilling jigs for Lambda 77 L Door...7 Changes 4 Lambda window system adjustments... 8 4. Modified sash profile B80360 Lambda 77 XL...8 4. Modified glazing beads P8037 and P80377...9 4.3 Change of contour for interlocking frames B8030/B8060...0 4.4 Conversion of concealed window fittings to stay-arms for a sash weight of 70 kg... 4.5 New energy-absorbing stay-arm opening limiter Z996735...3 5 System adjustments Lambda Door... 4 5. Glazing gaskets Lambda/Lava Door: Sale of stocks with surface, siliconized, followed by conversion to 5, coated with sliding polymer...4 5. Conversion of anti-panic handles for Wilka lock sets to the new generation...5 5.3 New flush bolt Z996957 replaces Z99408...7 5.4 New pins for escape door systems Lambda/Lava...9 5.5 Z94673: Change of gasket contour for flexible order of assembly...0 6 Volato System adjustment... 6. Volato M: New profile cylinders with shorter key bow... 7 System adjustment fire and smoke control constructions... 7. Conversion of BKS locks for BS C/RS C escape doors to new generation... 7. BS C doors: Now also with side lights equipped with burglar resistance WK...3 7.3 BS C door: Anti-fingertrap roller blind cannot be used for T30 doors...4 7.4 New documents for Lava 77-S...5 General Information 8 Miscellaneous... 6 8. Change of packing units...6 8. Articles phasing out...7 8.3 Lambda catalogue updates...8 8.4 Trigon catalogue updates...9 8.5 Volato catalogue updates...30 8.6 Catalogue update service...3 Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information Annex Re. Exchange page SCT statics of the Trigon catalogue Re 3. Order pages Tools/auxiliary accessories p. 6 7, Processing information p. and installation drawing 7700-00 Re 4.3 Lambda 77 L intersections, p. 75 Re 4.4 Installation drawings 09, 030, 039, 040, 04, 04, 06, 07 Re 4.5 Installation drawings 007, 008, 009, 0 Re 5. Order pages Escape door systems, p. 7 73 Re 5.3 Installation drawings 7605-00, -00, -003 and 763-00 Re 5.5 Order pages Accessories, p. 5, Intersections, p. 35 and Processing information p. 3 33 Re 6. Order page Fittings, p. 0 Re 7. Expert's opinion Re 7.4 Declaration of conformity Re 8.3 Installation drawings 057, 005, 0, 03 Re 8.4 Order page Profiles, p. 9 Intersections, p. 7, Lambda 0, order page Tools, p. and Processing information, p. 6 Trigon D, Processing information, p. Re 8.5 Order pages Accessories/Fitting, p. 3 7 Order pages Profiles, p. 8 Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information System supplements Trigon. Market launch Trigon D The well-known Trigon façade design has been supplemented by the series Trigon D which enables targeted drainage thanks to offset drainage levels and thus is ideally suited for flat and slanted façade areas. Being a of the Trigon modular system, the Trigon D design, which is offered in two elevation widths of 50 mm and 60 mm, can, of course, be combined with the other Trigon series. All insert elements of the Lambda series as well as the skylight windows of the 85 E and.0 designs can be inserted. Product features Construction for vertical or slanted façades Identical profile geometry for mullions and transoms With an elevation width of either 50 mm or 60 mm Insulating zone either made of glass fibrereinforced spacer profiles or of foamed insulating profiles for higher thermal insulation requirements For fillings between 4 and 58 mm Drainage according to the shingle principle Building and construction physics/system test Suitable for passive houses in accordance with ift guideline WA 5/ Water tightness class RE 00, EN 54 Air permeability class AE, EN 5 Resistance to wind load EN 36, test load 400 Pa, safety 3600 Pa Shock resistance I5/E5 in accordance with DIN EN 4 09 Airborne sound insulation Rw = 37-46 db, EN ISO 77- Documentation You can find a PDF version of the catalogue on the internet. Amended PDF page Statics SCT for the Trigon catalogue can be found in the annex. The series can be planned and calculated in HueckTec. Roof intersection Info Point No. 4 November 0 Page 3 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information. Market launch Trigon Unit L Hueck's unitized façade design has been successfully used in international projects for many years and undergoes continuous further development, amendment and optimization of insulation properties. Based on this experience, Hueck's project engineers have developed a standard series: the highly insulated unitized façade construction Trigon Unit L. The design is suitable for constructing larger façade. The elements, which are pre-fabricated and glazed in the workshop, are mounted to the building structure horizontally next to each other and vertically on top of each other. In the course of assembly, the joints between the units are sealed in an air- and rain-proof way by means of unit gaskets. Product features Economic construction of large façade areas with a high degree of pre-fabrication in the workshop Not only fixed glazing and panels can be used, but also all Lambda insert elements. Building and construction physics/system test Water tightness class RE 00, EN 54/CWCT Air permeability class AE 750, EN 5/CWCT Resistance to wind load in accordance with EN 36/CWCT, test load 400 Pa, safety 3600 Pa Shock resistance I5/E5 in accordance with DIN EN 4 09/CWCT Documentation You can find a PDF version of the catalogue on the internet. Availability The articles of the Trigon Unit L catalogue are not kept on stock (except of a few exceptions) and are subject to special delivery times and minimum order quantities, where applicable. Info Point No. 4 November 0 Page 4 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information System supplements Lambda Window. Market launch Lambda 77 L opening out The new side-hung or top-hung projecting out window construction opening out will be added to the Lambda 77 L programme with immediate effect. Two sash profiles are offered: B8037 which can house Hueck fittings or B80370 for gear locks (espagnolette fittings). Sash dimensions of up to 000 mm x 00 mm have been tested and can be realized in accordance with EN 435 and BS 6375. It is suitable for a glass thickness between 4 and 5 mm in the fixed frame and between and 54 mm in the sash. The new design can be combined with the Lambda 77 L modular system. In addition, new fixed frames/insert frames and interlocking frames with an interlocking width of 8 and 38 mm have been added. Product features Thermal insulation: Uw value of up to 0.9 W/m²K Water tightness in accordance with EN 08: Class E 050 Air permeability in accordance with DIN EN 5: Class 4 Resistance to wind load: Class C4/C5 Documentation Catalogue documents can be found in the annex and on our homepage. The series extension can be planned and calculated in HueckTec. Info Point No. 4 November 0 Page 5 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 3 System supplements Lambda Door 3. New bottom rail profile B8034 for Lambda 77 L fixed fields For fixed fields next to outside doors, the catalogue and stock programme now not only includes fixed frame B80340 with an elevation with of 58 mm, but also fixed frame B8034 with an elevation width of 68 mm. Depending on the selected door threshold, side lights with views that are identical to the door can be designed either with door bottom rail profile B805500 and substruction profiles B80570 or B80570 or with the wider fixed frames B80340 or B8034. Corresponding intersections can be found in the Lambda Door catalogue. The benefits New: Composite profile B8034, spilt T-brackets and connecting sleeve for improved U values Identical views for fixed field and door Only one profile - no profile coupling of bottom rail and substruction proifle required Illustration Article no. Designation On stock Series Packing unit B8034 Fixed frame Yes Lambda 77 L 6500 mm K9030 Insulating strip 000 x 0 x 30 mm for B8034 Yes Lambda 77 L 8 Z9856 T-bracket, outside Yes Lambda 77 L 0 Z9857 T-bracket, inside Yes Lambda 77 L 0 Info Point No. 4 November 0 Page 6 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 3. New drilling jigs for Lambda 77 L Door For customers who use Lambda door series exclusively with a profile depth of 77 mm, two additional drilling jigs only for the Lambda 77 L door have been added to the programme in addition to the familiar drilling jigs Z94889 and Z94890. The benefits no adjustment to profile depth required quicker processing more economic investment Illustration Article no. Designation On stock Series Packing unit Z9805 Drilling jig for corner cleats, processing at the sash (outside) and fixed frame (inside) Yes Lambda 77 L Door Z9806 Drilling jig for corner cleats, processing at the sash (inside) and fixed frame (outside) Yes Lambda 77 L Door Documentation New catalogue pages, instructions for use and installation drawings can be found in the Lambda Door catalogue 08/0 or in the annex. Info Point No. 4 November 0 Page 7 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 4 Lambda window system adjustments 4. Modified sash profile B80360 Lambda 77 XL Following the conversion of sash profiles B80340 and B80350, the large XL sash B80360 now also is supplied with a changed thermal barrier (marked by coloured circle). As the inner and outer shell remain identical, so do the brackets. Prices and U f values of the sash assembly groups remain unchanged. The new connecting sleeve K9030 has been introduced to match the changed inner dimension of the insulating zone. B80360 The benefits Modified assembly group is more true to form and less vulnerable to application of heat during coating U f value remains unchanged as compared to the old version Illustration Article no. Designation On stock Series Packing unit B80360 Sash frame Yes Lambda 77 XL 6500 mm K9030 Insulating strip 000 x 30 x 4 mm for B80360 Yes Lambda 77 XL 45 Info Point No. 4 November 0 Page 8 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 4. Modified glazing beads P8037 and P80377 Following the sale of the existing stocks, the glazing bead base of glazing beads P8037 and P80377 for outside glazing will be changed so that the glass retainers can be used for the fire protection series Lava without notching, which means that it will be suitable for both series, Lambda and Lava. Processing remains unchanged. P8037 P80377 The benefits Use for Lambda and Lava series Info Point No. 4 November 0 Page 9 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 4.3 Change of contour for interlocking frames B8030/B8060 Following the sale of the existing stocks, the contour of interlocking frame B8030/B8060 will be changed to match the other interlocking frames and will be provided with a nose at the inner shell to optimize the compensation of production tolerances and for an optical reduction of the inside recess joint. Please observe the changed dimension of the recess joint. Documentation Corrected section drawings can be found in the annex. The change of dimension for the recess joint has been adjusted in HueckTec and will be available in the next update. Info Point No. 4 November 0 Page 0 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 4.4 Conversion of concealed window fittings to stay-arms for a sash weight of 70 kg All concealed window fittings for the opening types side-hung, turn-tilt, tilt-before-turn and French window have been converted to new stay-arms and bearings suitable for a sash weight of 70 kg. Following the sale of existing stocks, the new fittings will be included under identical combination numbers and can be identified by the new article numbers for stay-arms/bearings listed here as well as by the mark "70 kg" embossed on the stay-arm. The benefits For sash weights of up to 70 kg Documentation Application diagrams in the Lambda Window catalogue remain valid. New installation drawings 09, 030, 039, 040, 04, 04, 06 und 07 can be found in the annex. Article new with stayarm / bearing... Designation no. Z9959 Turn/tilt basic fitting with stay-arm hinge 600 mm, Din L Z9767 Z99593 Turn/tilt basic fitting with stay-arm hinge 600 mm, Din R Z9768 Z99594 Turn/tilt basic fitting with stay-arm hinge 400 mm, Din L Z9765 Z99595 Turn/tilt basic fitting with stay-arm hinge 400 mm, Din R Z9766 Z99598 Turn/tilt basic fitting with stay-arm hinge 600 mm, Din L, safety device to Z9767 defer incorrect operation Z99599 Turn/tilt basic fitting with stay-arm hinge 600 mm, Din R, safety device Z9768 to defer incorrect operation Z99590 Turn/tilt basic fitting with stay-arm hinge 400 mm, Din L, safety device to Z9765 defer incorrect operation Z9959 Turn/tilt basic fitting with stay-arm hinge 400 mm, Din R, safety device Z9766 to defer incorrect operation Z995940 Tilt-before-turn basic fitting with stay-arm hinge 600 mm, Din L Z977 Z99594 Tilt-before-turn basic fitting with stay-arm hinge 600 mm, Din R Z977 Z99594 Tilt-before-turn basic fitting with stay-arm hinge 400 mm, Din L Z9769 Z995943 Tilt-before-turn basic fitting with stay-arm hinge 400 mm, Din R Z9770 Z995946 Tilt-before-turn basic fitting with stay-arm hinge 600 mm, Din L, safety Z977 device to defer incorrect operation Z995947 Tilt-before-turn basic fitting with stay-arm hinge 600 mm, Din R, safety Z977 device to defer incorrect operation Z995948 Tilt-before-turn basic fitting with stay-arm hinge 400 mm, Din L, safety Z9769 device to defer incorrect operation Z995949 Tilt-before-turn basic fitting with stay-arm hinge 400 mm, Din R, safety Z9770 device to defer incorrect operation Z995968 Side-hung fitting for second sash with stay-arm hinge 300 mm, Din L Z9775 Z995969 Side-hung fitting for second sash with stay-arm hinge 300 mm, Din R Z9776 Z99607 Side-hung basic fitting with stay-arm hinge 300 mm, Din L Z9775 Z99608 Side-hung basic fitting with stay-arm hinge 300 mm, Din R Z9776 Z99609 Side-hung basic fitting with pivot bearing, Din L Z9780 Z996030 Side-hung basic fitting with pivot bearing, Din R Z978 Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information Article new with stayarm / bearing... Designation no. Z99604 Side-hung fitting for second sash with pivot bearing, Din L Z9780 Z996043 Side-hung fitting for second sash with pivot bearing, Din R Z978 Z996044 Turn/tilt ventilation sash for second sash with stay-arm hinge 600 mm, Z9767 Din L Z996045 Turn/tilt ventilation sash for second sash with stay-arm hinge 600 mm, Z9768 Din R Z996046 Turn/tilt ventilation sash for second sash with stay-arm hinge 400 mm, Z9765 Din L Z996047 Turn/tilt ventilation sash for second sash with stay-arm hinge 400 mm, Z9766 Din R Z996050 Turn/tilt ventilation sash for second sash with stay-arm hinge 600 mm, Z9767 Din L, safety device to defer incorrect operation Z99605 Turn/tilt ventilation sash for second sash with stay-arm hinge 600 mm, Z9768 Din R, safety device to defer incorrect operation Z99605 Turn/tilt ventilation sash for second sash with stay-arm hinge 400 mm, Z9765 Din L, safety device to defer incorrect operation Z996053 Turn/tilt ventilation sash for second sash with stay-arm hinge 400 mm, Z9766 Din R, safety device to defer incorrect operation Z99640 IF side-hung fitting for second sash with stay-arm hinge 300 mm, Din L Z9775 Z9964 IF side-hung fitting for second sash with stay-arm hinge 300 mm, Din R Z9776 Z9964 IF side-hung fitting for second sash with pivot bearing, Din L Z9780 Z99643 IF side-hung fitting for second sash with pivot bearing, Din R Z978 Please observe that no limiting stay-bar is required for normal operation of the window. An additional limiting stay-bar (e.g. Z99448, Z99497, Z99497, Z99547) must be installed: for sash widths exceeding,00 mm for sash weights exceeding 90 kg in public buildings (schools, town hall, etc.) Energy-distortive limiting stay-bars (e.g. Z996734) can only be used up to a sash weight of 30 kg. Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 4.5 New energy-absorbing stay-arm opening limiter Z996735 The new energy-absorbing stay-arm opening limiter Z996735, size, with an opening width of up to 90 has been introduced for windows of series Lambda 77 L/XL, Lambda 65 M and Lambda 57 S as well as Lambda 77 L IF and Lambda 65 M IF and will replace the current stay-arm opening limiter Z994956. Product features Relief for hinge elements thanks to energy-absorbing effect during opening Stops unwanted movements of the window sash Please note: new assembly position, observe the installation drawings The benefits Suitable for exposed and concealed fittings Frame and sash support can be clamped All s made of inoxidable material Maintenance-free Suitable for left and right side Documentation New installation drawings 007, 008, 009, 0 can be found in the annex. Field of application: Exposed fitting Artikelnummer Material no. Größe Size max. Flügelgewicht max. sash weight Öffnungsweite Opening angle Z994955 90 kg approx. 90 Z996735 30 kg approx. 90 Field of application: Concealed fitting Artikelnummer Material no. Größe Size max. Flügel- Öffnungsweite Opening angle gewicht max. sash weight Z994955 90 kg approx. 70 Z996735 30 kg approx. 90 Dreh-Kipp, Dreh, Stulp Turn-tilt, side hung, secondary sash Flügelbreite Sash width 507 999 mm Flügelbreite Sash width 670 600 mm Dreh-Kipp, Dreh, Stulp Turn-tilt, side hung, secondary sash Flügelbreite Sash width 537 999 mm Flügelbreite Sash width 675 600 mm Öffnungsart Opening type Öffnungsart Opening type Kipp-vor-Dreh Tilt before turn Flügelbreite Sash width 60 999 mm Flügelbreite Sash width 775 600 mm Kipp-vor-Dreh Tilt before turn Flügelbreite Sash width 640 999 mm Flügelbreite Sash width 780 600 mm Illustration Article no. Designation On stock Series Packing unit Z996735 Limiting stay-bar, energy-absorbing, size, 30 kg Yes Lambda window Info Point No. 4 November 0 Page 3 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 5 System adjustments Lambda Door 5. Glazing gaskets Lambda/Lava Door: Sale of stocks with surface, siliconized, followed by conversion to 5, coated with sliding polymer Several years ago, the standard humidification of the system-dependent glazing gaskets of window and door series with silicone (surface key ) was changed to sliding polymer (surface key 5). Back then, the surface of some gaskets remained siliconized - these are now gradually converted to sliding polymer (surface key 5) as well for Lambda / Lava doors to ensure multiple use. Existing stocks in the siliconized design will be sold in the course of the next weeks and months, then new stocks with a sliding polymer surface will be available. Articles phasing out (following the sale) Illustration New article no. Designation On stock Series Packing unit Z909.000 Z909 5.000 Glazing gasket, 6.5-9 mm Lambda/ Lava Door,.0 etc. 75 m Z907.000 Z907 5.000 Glazing gasket, 4-6.5 mm Lambda/ Lava Door,.0 etc. 00 m Z9078.000 Z9079.000 Z9078 5.000 Z9079 5.000 Glazing gasket, 6.5-9 mm Glazing gasket, 4.5-7 mm following the sale of the stocks Lambda/ Lava Door,.0 etc. Lambda/ Lava Door,.0 etc. 00 m 00 m Z907.000 Z907 5.000 Glazing gasket, 5.5-8 mm Lambda/ Lava Door,.0 etc. 00 m Z908.000 Z908 5.000 Glazing gasket, 5.5-8 mm Lambda/ Lava Door,.0 etc. 00 m Info Point No. 4 November 0 Page 4 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 5. Conversion of anti-panic handles for Wilka lock sets to the new generation Following the sale of push bars Z9350, Z935 and horizontal handle bars Z93670, Z9367 these will be converted to the new handles. The new articles will be included in the programme under the new article number. The following table compares the old and new numbers. The hole scheme for fixing the handles/handle bars of the old and new generation is identical. This is why the existing installation drawings remain valid. Please observe, however, that only tubes from the old generation can be used for handles from the old generation. The same applies to new handles and tubes for handles. Following the sale of existing stocks, an automatic change to the new article numbers will occur when the old article is ordered. Handle bars and tubes for handles coated white (Z9750 64, Z975 64 and Z9756 64) will not be replaced by new articles. Old articles still on stock will be sold while stocks last, then the white surface for these handle bars will be taken from the catalogue and delivery programme. Handle bars coated white will then only be available upon request and with longer delivery times. Articles phasing out Z93670 3.000 Z9367 3.000 Z9350 0.000 Z9350 3.000 Z935 0.000 Z935 3.000 Z9356 0.000 Illustration New article no. Z987 3.000 Z9873 3.000 Z9874 0.000 Z9874 3.000 Z9875 0.000 Z9875 3.000 Z9876 0.000 Designation Handle bar 000 mm Handle bar 50 mm Handle bar, active sash, designated for profile cylinder, DIN L/R (without tube for handle) Handle bar, active sash, designated for profile cylinder, DIN L/R (without tube for handle) Handle bar, inactive sash, DIN L/R, without tube for handle Handle bar, inactive sash, DIN L/R, without tube for handle Tube for handle bar 50 mm On stock Series Yes Yes Yes Yes Yes Yes Yes Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Packing unit Info Point No. 4 November 0 Page 5 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information Z9356 0.000 Z9356 3.000 Z9356 3.000 Z9877 0.000 Z9876 3.000 Z9877 3.000 Tube for handle bar 500 mm Tube for handle bar 50 mm Tube for handle bar 500 mm Yes Yes Yes Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Lambda,.0 Door, A7, BS C, RS C Info Point No. 4 November 0 Page 6 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 5.3 New flush bolt Z996957 replaces Z99408 Flush bolt Z99408 for Lambda and.0 doors is replaced by the new flush bolt Z996957 with mm feed instead of 0 mm which is supplied with a 4 mm stainless steel front plate and adapter pieces (shown in dotted lines) which enable use with larger backsets of up to 60 mm. At the same time, bascule flush bolt Z9978 will be taken from the programme. As an alternative, we recommend the new flush bolt Z996957 which, however, is operated via the rebate chamber in the opened sash. Please observe that the milling dimensions and the hole scheme change. The connection of operating rods Z908543 or Z9008 at top and bottom remains unchanged. The benefits A single flush bolt for different backsets of up to 60 mm 4 mm stainless steel front plate mm feed Info Point No. 4 November 0 Page 7 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information Illustration Article no. Designation On stock Series Packing unit Z996957 3.000 Espagnolette bolt Lever for top-hung window, backset 35/60mm Yes Lambda,.0 Door Documentation Please observe the new installation drawings 763-00 for Z99408 and 7605-00, 7605-00 and 7605-003 for Z9978. Info Point No. 4 November 0 Page 8 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 5.4 New pins for escape door systems Lambda/Lava In the course of the next weeks, new divided pins will be introduced for escape door locks in accordance with EN 79/5. The benefits Groove enables easy installation of the headless screw Thus easy to mount, quicker and safer to use The pins will be continued with the known article numbers and gradually be converted to the new generation following the sale of stocks. Corresponding notes and new assembly instructions will be included with the delivery. The sales prices remain unchanged. Panic pin mm mm Panic pin mm mm Z9408 40 90 Z9494 50 60 Z9407 50 95 Z948 50 50 Z93555 65 65 Z9489 40 75 Z9484 50 80 Z9490 40 70 Z9485 50 70 Z9487 40 50 Z93557 50 65 * Please make sure that only the included headless screw is used. Info Point No. 4 November 0 Page 9 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 5.5 Z94673: Change of gasket contour for flexible order of assembly By using insert profile P805650 and gasket profile Z94673, the window fixed frame can be converted to a door fixed frame. In the course of the next week, the contour of filler profile Z94673 will be changed following the sale of existing stocks. Thanks to the new contour, no specific order of assembly must be observed, i.e. the gasket profile can be inserted either before or after screwing the insert profile P805650. As an option, the U value barrier can be attached depending on the U value requirement; this is why the contour is supplied dry and not wetted with sliding polymer. The benefits Simpler installation of insert profile P805650 with gasket profile Z94673 Documentation New catalogue and processing documents can be found in the annex. Current contour New contour: also suitable for subsequent installation Illustration Article no. Designation On stock Series Z94673 00.000 Gasket, lateral cover for Lambda 77 L Door yes approx. from mid- December Lambda 77 L Door Packing unit 30 m Info Point No. 4 November 0 Page 0 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 6 Volato System adjustment 6. Volato M: New profile cylinders with shorter key bow As the key of the normal profile/half cylinders collides with the handle of the lifting/sliding door, profile/half cylinders with a shorter key bow have been introduced. Please note the following change of article: Z 903458 Z9448 Illustration Article no. Designation Z9887 Semi-cylinder 35 mm for Volato M with shortened keys On stock Series Packing unit Yes Volato M Z9888 Profile cylinder 35/60 mm for Volato M with shortened keys Yes Volato M The amended catalogue page for exchange can be found in the annex. Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 7 System adjustment fire and smoke control constructions 7. Conversion of BKS locks for BS C/RS C escape doors to new generation In Info Point 4 we provided information on the conversion of the Lambda escape door systems to the new BKS locks in accordance with EN 79 and EN 5. Now the series BS C and RS C will be gradually converted to the new revised BKS series 8 as well - this offers the known features and advantages: Product features As an option with upper locking (additional latch) with integrated spring pack for using M6 espagnolette bolts Reversible latch for function E (Din LR) In closing position, the bolt manually locks before at a length of 0 mm Holes for fittings ensure continuous fixing of the fitting Housing thickness = 5.5 mm Approved in accordance with EN 79 and EN 5 CE marking in accordance with EN 09 The benefits In closing position, the bolt manually locks before at a length of 0 mm, conical shape of the bolt warrants for safe locking Optional additional latch (upper locking) with integrated spring pack enables individual adjustment of the spring force for different door heights Uniform height of the lock case Double-leaf escape door solutions without additional latch can be realized with electric openers Optional use of control contacts The applications and lock sets numbers stated in the catalogue remain unchanged. Only the article numbers of individual locks (including espagnolette locks) and striking plates are changed. Please observe that in case of repairs on "old" locks, the lock set must be ordered due to the correlations between main lock, espagnolette lock and striking plate. Following the conversion to the new generation of locks, locks with special functions (such as, for example, bolt or latch control) will be available again upon request Info Point No. 4 November 0 Page of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 7. BS C doors: Now also with side lights equipped with burglar resistance WK In addition to the test report on burglar-resistant fire protection doors of series BS C-, single-sash fire protection doors with side lights according to the expert opinion now can also be designed as a burglar-resistant version in accordance with DIN V ENV 67 for requirements of resistance class. The expert opinion can be found on our homepage www.eduard-hueck.de at Catalogues, Fire protection, Series BS C, Approvals/Test reports, or in the annex. Info Point No. 4 November 0 Page 3 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 7.3 BS C door: Anti-fingertrap roller blind cannot be used for T30 doors Following consultation with the approval authority we are unfortunately no longer able to offer a fire protection doors of series BS C as a T30 door with an Athmer anti-fingertrap roller blind. This means that the former 0 annex no. 3.0 is no longer valid. This is based on a decision of the experts' committee stating that the use of an anti-fingertrap roller blind for all fire-protection doors made of steel and aluminium must be evidenced by means of a successful fire test, which is not the case so far. Consequently, we have to ask you to delete no. 3.0 from the 0 annexes in your catalogue. For the new fire-protection construction Lava 77-30, the Athmer anti-fingertrap roller blind was successfully tested and can be declared as "insignificant deviation". Info Point No. 4 November 0 Page 4 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 7.4 New documents for Lava 77-S PEWA for Lava 77-S The planning, installation and maintenance instructions for smoke protection door Lava 77-S for transmission to the principal are available as a separate hardback brochure for the German market and can be ordered, if required, under article no. Z93833 against payment of a nominal fee of.00 net/per piece (packing unit = 0). At the same time, the PEWA pages are also available for downloading and printing in the catalogue download section on our homepage. Declaration of conformity Lava 77-S The form for the declaration of conformity/certificate of compliance can be downloaded from our download section. The PDF form can be completed, saved and printed directly at the PC so that no manual completion is required. Info Point No. 4 November 0 Page 5 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 8 Miscellaneous 8. Change of packing units Illustration Article no. Designation On stock Series Old packing unit New packing unit Z9498 Shaped gasket piece for SV Z9479 for B803(6)40 Yes Lambda Door 77 L/ 65 M 0 Z9709 3.000 U profile for SG glass Yes Trigon SG 0 Z97357 Insulating strip 000 x 30 x 3 mm Yes Lava 77-30 6 4 Z9736 Insulating strip 000 x 30 x 85 mm Yes Lava 77-30 6 5 Z97364 Insulating strip 000 x 7 x 58 mm Yes Lava 77-30 9 6 Z97367 Insulating strip 000 x 5 x 44 mm Yes Lava 77-30 6 Z97368 Insulating strip 000 x 5 x 48 mm Yes Lava 77-30 6 Z97539 Snap-in glass retainer, made of stainless steel Yes Lava 77-30 50 0 Z99848 Fixing Elem. strike plate WK Yes BS C RS C 6 Info Point No. 4 November 0 Page 6 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point 8. Articles phasing out Current information A7 swing door lock now with bolt only The lock for swing doors with roller latch and bolt Z944 incl. pertaining striking plate Z993633.000 has been deleted from the delivery programme. For swing doors of series A7, please use bolt lock Z945 with the matching striking plate Z993643.000. Replacement: Info Point No. 4 November 0 Page 7 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 8.3 Lambda catalogue updates Installation drawings 057, 0 and 03 for studio windows have been added to the Lambda window catalogue and are available for download. Please add these to your catalogue. Modification: In addition to the T-brackets and fittings for studio windows, the new installation drawing for turn-tilt window no. 057 as well as no. 0 and 03 for side-hung windows was created. Installation drawing 005 for fixed sashes has been added to the Lambda window catalogue and is available for download. Please add it to your catalogue. Modification: Installation drawing 005 with information on the locking for fixed sashes has been added. Info Point No. 4 November 0 Page 8 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 8.4 Trigon catalogue updates Page 9, Profile, Trigon 50 has been modified and is available for download. Please exchange this page in your catalogue. Modification: Page 9, Profiles: On account of the low overall height, P49609 is not suitable for façade fixing screws with washers. This note has been added. Page 7, Intersections, Trigon 50/60 has been modified and is available for download. Please exchange this page in your catalogue. Modification: Page 7, Intersections: Item 8a is shown with a wrong article number: the plastic spacer profile should read K909 (used to be K900), the illustration is correct. Insert elements Lambda 0, Processing page 6 and Tools page have been modified. Please correct these in your catalogue. Modification: Page 6, Processing: For parallel hinge Z996353, the hole pitch in the sash was changed to 46.3 mm from 44,3 mm. Fixing screw Z9097 was replaced by Z9396 both on the sash and on the frame side. Page, Tools / Auxiliary accessories: Drilling jig Z996568 cannot be used for stay-arm Z996353. Compendium Trigon D, page, Processing has been modified and is available for download. Please exchange this page in your catalogue. Modification: Page, Processing: In order to enable greater tolerances, the hole pitch for the t-bracket with spring pin has been adjusted by 0.5 mm. The new dimensions were already taken into consideration for the drilling jigs. Info Point No. 4 November 0 Page 9 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 8.5 Volato catalogue updates Pages 3 to 7, Accessories, Volato M have been modified and are available for download. Please exchange these pages in your catalogue. Modifications Page 3: Sliding fitting, accessory for a sash weigh of up to 00 kg: The basic fitting for scheme D consists of x Z996536 (used to be x Z996536 and x Z996539) Page 4: Lifting-sliding fitting, accessory for a sash weight of up to 00 kg: The sash widths have been changed for all schemes, handle illustrations Z97559, Z97560, Z9756 modified Page 5: Lifting-sliding fitting, accessory for a sash weight of up to 300 kg: Handle illustrations Z97559, Z97560, Z9756 modified Page 6: Lifting-sliding fitting, accessory for a sash weight of up to 400 kg: Handle illustrations Z97559, Z97560, Z9756 modified Page 7: Lifting-sliding fitting 300 kg, extension for WK/SKG: Handle illustration Z97560 modified Page 8, Profiles, Volato M, has been supplemented by a note on bi-colour orders for B8390 and is available for download. Please exchange this page in your catalogue. Modifications B8390 can be used both-sided. This means that for bi-colour orders, the desired surface for each half-shell must be indicated in a sketch. In order to prevent faulty orders / deliveries, the following note has been added: The profile B 8390 can be used both-sided, inner shell becomes outer shell and reversed. Therefore please show on a draft how each shell should be covered. The best will be to write the surface directly at the icular shell on a copy of the catalogue page and to send it together with the order. Info Point No. 4 November 0 Page 30 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
Info Point Current information 8.6 Catalogue update service All updated catalogue pages are made available at short notice as PDF documents for downloading on our web site www.eduard-hueck.com. Corrected pages or series supplements can be downloaded and printed there at regular intervals. The amendments made for each profile series are documented in an ongoing list. A link to the list of the revised catalogue pages can be found at http://www.eduard-hueck.com/info-point/catalogue-updates Info Point No. 4 November 0 Page 3 of 3 Subject to alteration. Our general Terms and conditions of sales and delivery which we will be happy to provide upon request or which you can download from our homepage shall apply Eduard Hueck GmbH & Co. KG, D-Lüdenscheid
7 7 Statische Werte für Pfosten und Einschubprofile Statical values for mullions and insert profiles Trigon 50 / 50 SG Trigon 60 / 60 SG
Systemabhängiges Zubehör - Werkzeuge System-dependent accessories - Tools Alle Bohrschablonen sind werkseitig auf ein theoretisches Bohrmaß eingestellt. Um zu überprüfen, ob die Vorspannung stimmt, muss vor dem ersten Einsatz eine Probeecke angefertigt und die Bohrschablone entsprechend eingestellt werden. All drilling jigs are preset at a theoretic drilling space. In order to clarify whether the pre-tension is correct, a test corner has to be prepared and the drilling jig has to be adjusted accordingly before starting production. Z 94889 Z 94889 Tür Serie Lambda Door series Lambda 77 L 65 M 57 S Bohrschablone für Eckverbinder, für die Bearbeitung am Flügel- und Blendrahmenprofil (Blendrahmen- innen, Flügel- außen) Drilling jig for corner connection, for processing at the sash profile and the fixed profile (the fixed profile inside, the sash profile outside) Z 9805 * Bohrschablone für Eckverbinder, für die Bearbeitung am Flügel- und Blendrahmenprofil Z 9805 * Drilling jig for corner connection, for processing at the sash profile and the fixed profile 77 L Z 97530 Z 97530 77 L 65 M Bohrschablone für Eckverbinder, für Einspannblendrahmen Drilling jig for corner connection, for processing at the interlocking frame 006003500 * Alternative Bohrschablone nur für 77L * Alternative drilling jig only for 77L 6 08/0 Werkzeuge und Hilfsmittel Tools and auxiliary accessories Lambda Lambda
Systemabhängiges Zubehör - Werkzeuge System-dependent accessories - Tools Z 9445 Bohrschablone für Stoßverbinder, für die Bearbeitung am Sprossenprofil, Fensterblendrahmen und Sockelprofil Z 9445 Drilling jig for T-brackets, for processing at the transom profile, window fixed frame and bottom rail profile Tür Serie Lambda Door series Lambda 57 S Z 94709 Z 94709 65 M Bohrschablone für Stoßverbinder, für die Bearbeitung am Sprossenprofil, Fensterblendrahmen und Sockelprofil Drilling jig for T-brackets, for processing at the transom profile, window fixed frame and bottom rail profile Z 9470 Z 9470 77 L Bohrschablone für Stoßverbinder, für die Bearbeitung am Sprossenprofil, Fensterblendrahmen und Sockelprofil Drilling jig for T-brackets, for processing at the transom profile, window fixed frame and bottom rail profile Z 9477 Bohrschablone für Stoßverbinder, für die Bearbeitung am Sockelprofil Z 9477 Drilling jig for T-brackets, for processing at the bottom rail profile 77 L 65 M 57 S Z 94890 Z 94890 77 L 65 M 57 S Bohrschablone für Eckverbinder, für die Bearbeitung am Flügel- und Blendrahmenprofil (Blendrahmen- außen, Flügel- innen) Drilling jig for corner connection, for processing at the sash profile and the fixed profile (the fixed profile outside, the sash profile inside) Z 9806 * Z 9806 * 77 L Bohrschablone für Eckverbinder, für die Bearbeitung am Flügel- und Blendrahmenprofil Drilling jig for corner connection, for processing at the sash profile and the fixed profile Z 9498 Z 9498 77 L 65 M 57 S Bohrschablone für Kunststoff Formteil Z 94737 und Z 94738, für die Bearbeitung am Flügelprofil Drilling jig for shaped piece Z 94737 and Z 94738, for processing at the sash profile 007003600 Z 9489 Z 9489 77 L Einrollwerkzeug für Dämmprofil Z 9467 Tool to roll in for insulating profile Z 9467 * Alternative Bohrschablone nur für 77L * Alternative drilling jig only for 77L Einbau: siehe Verarbeitungshinweis Installation: refer to Processing Information 08/0 Lambda Werkzeuge und Hilfsmittel 7 Lambda Tools and auxiliary accessories
Bohrschablonen für Eckverbindungen - Flügel Drilling jigs for corner connections - sashes Lambda 77 L Ø 5 / Ø 7.6 Z 9806 Ø 5 / Ø 7.6 Z 9805 Ø 5 / Ø 7.6 Z 9805 Ø 5 / Ø 7.6 Z 9806 0003300 Lambda 08/0 Verarbeitung Lambda Processing
Lochmaß von innen Drill hole dimension from inside Ø5 Ø7.6 Ø5 Ø7.6 Ø7.6 Ø5 Ø7.6 Ø5 40.3 40.3 40.3 40.3 40.3 40.3 40.3 8.5 8.5 8.5 5 7 8.5 8.5 7 Übersicht Bohrbilder Overview drilling schemes 40.3 Siehe Tabelle See table Einstellung der Bautiefe Adjustment of construction depth 7.7 8.5 7.7 8.5 5 8.5 8.5 8.5 Lochmaß von außen Drill hole dimension from outside Siehe Tabelle See table Siehe Tabelle See table Siehe Tabelle See table Siehe Tabelle See table Siehe Tabelle See table Siehe Tabelle See table Siehe Tabelle See table Ø5 Ø5 Ø7.6 Ø5 Anschlag AB Limit stop AB Ø7.6 Ø7.6 Ø7.6 Serie Series Lambda 77 L Lambda 65 M Lambda 57 S Profile Profiles Blendrahmen Fixed frame Einspann-Blendrahmen Interlocking frame Einsatzrahmen Insert frame Flügelrahmen Sash frame Blendrahmen Fixed frame Einspann-Blendrahmen Interlocking frame Einsatzrahmen Insert frame Flügelrahmen Sash frame Blendrahmen Fixed frame Flügelrahmen Sash frame Öffnungsart Opening type einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in einwärts öffnend opening in auswärts öffnend opening out auswärts öffnend opening out auswärts öffnend opening out auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in einwärts öffnend opening in auswärts öffnend opening out auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out einwärts öffnend opening in auswärts öffnend opening out Baugruppe Component B 80500 B 80500 B 805030 B 805040 B 805600 B 80560 B 80500 B 8050 B 8050 B 80530 B 80560 B 80570 B 80800 B 80800 B 808030 B 808040 B 808600 B 80860 B 80800 B 8080 B 8080 B 80830 B 800 B 800 B 800 B 80 Lochmaß von außen Maß in mm Innenkante Hole size from outside measures in mm inner edge 87,5 / 87,5 87,5 / 80, Einstellung der Bautiefe Adjustment of construction depth - Bohrschablone Drilling jig Z 94890 Z 9806 * Z 94890 Z 9806 * - - - 87,5 / - Z 94890 Z 9806 - * 87,5 / - Z 94890 Z 9806 - * 89, / 80, Z 94889 Z 9805 * 5 96, / 87, Z 94889 Z 9805 * 3 6 89, / 89, Z 94889 Z 9805 * 8 96, / 96, Z 94889 Z 9805 * 3 9 89, / 89, Z 94889 Z 9805 * 8 96, / 96, Z 94889 Z 9805 * 3 9 87,5 / 87,5 Z 94890 87,5 / 80, - - 87,5 / - 87,5 / - 89, / 80, 96, / 87, 89, / 89, 96, / 96, 87,5 / 87,5 87,5 / 80, 89, / 80, 89, / 89, Z 94890 - - - - Z 94889 Z 94889 Z 94889 Z 94889 Z 94890 Z 94890 Z 94889 Z 94889 Lochbild Hole pattern 5 3 6 8 3 9 5 8 Lochmaß von innen Maß in mm Außenkante Hole size from inside measures in mm outer edge Bohrschablone Drilling jig Lochbild Hole pattern Eckwinkel Innenkammer / Außenkammer Corner brackets inner chamber / outer chamber 5 40,3 / 40,3 Z 94889 Z 9805 * 7 (Anschlag A) (limit stop A) Z 94750 / Z 94747 4 40,3 / 40,3 Z 94889 Z 9805 * 4 (Anschlag A) (limit stop A) Z 94750 / Z 9478-40,3 / 40,3 Z 94889 Z 9805 * 7 (Anschlag A) (limit stop A) Z 94750 / Z 94747-40,3 / 40,3 Z 94889 Z 9805 * 4 (Anschlag A) (limit stop A) Z 94750 / Z 9478-40,3 / - Z 94889 Z 9805 * (Anschlag A) (limit stop A) Z 94750 / - - 40,3 / - Z 94889 Z 9805 * (Anschlag A) (limit stop A) Z 94750 / - (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 9475 / Z 9478 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 9475 / Z 9478 (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 9475 / Z 94747 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 9475 / Z 94748 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 97779 / Z 94747 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 Z 9806 * 3 Z 97780 / Z 94748 5 40,3 / 40,3 Z 94889 7 (Anschlag A) (limit stop A) Z 94750 / Z 94747 4 40,3 / 40,3 Z 94889 4 (Anschlag A) (limit stop A) Z 94750 / Z 9478-40,3 / 40,3 Z 94889 7 (Anschlag A) (limit stop A) Z 94750 / Z 94747-40,3 / 40,3 Z 94889 4 (Anschlag A) (limit stop A) Z 94750 / Z 9478-40,3 / - Z 94889 (Anschlag A) (limit stop A) Z 94750 / - - 40,3 / - Z 94889 (Anschlag A) (limit stop A) Z 94750 / - (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 9478 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 9478 (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 94747 (Anschlag B) (limit stop B) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 94748 5 40,3 / 40,3 Z 94889 7 (Anschlag A) (limit stop A) Z 94750 / Z 94749 4 40,3 / 40,3 Z 94889 4 (Anschlag A) (limit stop A) Z 94750 / Z 94783 (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 94783 (Anschlag A) (limit stop A) 40,3 / 40,3 Z 94890 3 Z 9475 / Z 94749 Einstellung der Bautiefe Anschlag einstellbar Adjustment of construction depth A: Bearbeitung Profil von innen B: Bearbeitung Profil von aussen Limit stop adjustable A: machining the profile from inside B: machining the profile from outside * Alternative Bohrschablonen nur für 77 L einsetzbar * Alternative drilling jigs only insertable for 77 L Montagebeispiele Bohrschablonen Examples of assembling the drilling jigs Einstellung der Bautiefe Adjustment of construction depth Diese Zeichnung wurde nach dem Entwicklungsstand des Zeichnungsdatums gefertigt. Rechtsansprüche aus der Benutzung derselben können nicht abgeleitet werden. This drawing has been made ready on the date as printed on this drawing. No right can be derived out of its use. Diese Unterlagen sind unser geistiges Eigentum. Nach den gesetzlichen Bestimmungen dürfen sie ohne unsere schriftliche Zustimmung weder vervielfältigt noch dritten Personen, insbesondere Wettbewerbern, mitgeteilt oder zugängig gemacht werden. (Urhebergesetz) The information remains our intellectual property. Due to legal requirements it is not allowed, neither to copy them nor to acquaint or handle them to third persons, especially competitors, without our written agreement. (Copyright law) Lambda Tür / door Übersicht Bohrschablonen Overview drilling jigs Zeichnung Nr. / Drawing no. 7700_00 00 0/06/0 77 L 65 M 57 S einwärts / inward auswärts / outward B E