Indstrie Service CERTIFICTE The Certification Body - - of TOV SOD Indstrie Service GmbH certifies that ITLFOND S.p.. Via Indstriae, 1-25021 Bagnoo Mea (BS) has impemented, operates and maintains a Qaity ssrance System in accordance with the Pressre Eqipment Directive 97/23/EC, nnex, Section 4.3 and -Merkbatt W O as a materia manfactrer far the scope of ingots and forged bars in astenitic, ferritic-astenitic and martensitic stees. The scope of the approvai is described in the annex to this certificate. Frther detais are mentioned in report no. 1927821. The manfactrer is therefore athorized to isse certificates of specific prodct contrai within the scope of the assessed qaity system and in accordance with the Pressre Eqipment Directive 97/23/EC. Possibe additiona reqirementsspecific to appied technica specifications to meet PED nnex - are not affected. This certificate is vaid throgh November 2014. The vaidity of this certificate is connected to a va id certification in accordance with ISO 9001 :2008. Certificate No.: DGR--QS-W 55/2002/MUC Mnich, Janary 15 1 h, 2013 Notified Body, No. TUV SUD Indstrie Service GmbH, Department Materia! andmttm!d~ Westendstr. 199, 80686 Mnich
Getngsbereich der Oberprfng as Hersteer von Werkstoffen nach -Merkbatt W O Scope of the approvai - Manfactrer of materia in accordance with -Merkbatt W O ndstrie Servi ce nage zm Zertifiat Nr. nnex to certificate no. DGR--QS-W 55120021MUC von dated 2013-01-15 Hersteer Manfactrer: Batt-Nr.:/ Zertifizierngsstee tr Drckgerate ITLFOND S.p.. Nationaitat:i Datm:/ Strar..e/Street: Via Indstriae, 1 Contry: Date: Page No.: Certification Body for pressre eqipment Ort/City: 25021 Bagnoo Mea (BS) Werk pant: 2013-01-15 1 v./ of 4 Benannte Stee, Nr. Notified Body, No. fd. Werkstoffbezeichnng Werkstoff- Liefer- Prfgegenstand bmessngen Gewicht/ Prfgrndagen Bemerkngen Nr./ Werkstoff-Nr. Spezifikation zstand Erzegnisform Dimensions Weight Technische Regen Remarks No. Materia! Designation Materia Deivery Description Reqirements Materia! Grade Specification Condition Prodct Technica Res Dicke Drchm./ Thickness Diameter 1 =t (m m] (m m] 2 = kg rt/ Nr./ Krze/ von bis von bis Wert rt/ Nr./No. No. Code from t o from t o.j, vae 1 T 2 3a 3b 4 5 6a 6b 7a 7b Sa 8b 9a 1 9b T 10 01 11.4301, 1.4303, 1.4306, 1.4311, DIN 17440 Bock ingot 140 1 ) 700 1 ) 160 700 1 21 W O ') Qadratischer Qerschnitt sqare 1.4541, 1.4550, 1.4401, 1.4404, 10088-3 Stab geschmiedet. ngeght section 1.4406, 1.4571, 1.4580, 1.4429, forged bar. not anneaed 1.4435, 1.4436, 1.4438. 1.4439 02 1.4462 SEW 400 -, - 140 1 ) 700') 160 700 11 21 IWO 03 11.4313 VdTUV 395/3.. 140') 700' ) 160 700 1 21 IWO 04 1.4547 VdTUV 1473 IU - ~~- 140 1 ) 700 1 ) 160 700 IWO 05 11.4418 SEW 1400 IU -, - 140 1 ) 700 1 ) SEW 400 1160 1700 11 121 w o 06 1.4876 SEW 1470 IU -,- 140 1 ) 700 1 ) SEW 470 1160 1700 11 121 w o 07 1.4539. 1.4466, 1.4501, 1.4542 110088-2 -.. - 140 1 ) 700 1 ) 160 700 1 21 IWO 08 11.4406, 1.4021. 1.4028 110088-3 -, - 140 1 ) 1700 1 ) 1160 1700 11 121 w o Bericht N r. report no. 1927821 vom dated 2013-01-15 Erdarno 1 Ex111anation: = osngsgeght nd abgeschreck sotion anneaed and qenched L = osngsgeght so tion anneaed N = normageght normaized S = spannngsarmgeght stress reieved TM = therm omech. behandet thermo-mech. treated U = ngeght not anneaed V = vergtet nd angeassen qenched and tempered CR = temperatrgereget warmmgeformt controed roed G = weichgeght anneaed a= Werkstoffbezeichnng in Spae 10 materia! designation in comn 10 b = Lieferzstand in Spate 10 deivery condition in comn 10 c= Prfgegenstand in Spae 10 object in comn 10 d = bmessng gem. tech. Regen dimensions ace. to technica res e= Gewicht gem. tech. Regen weight ace. to technica res f = N r. der tech. Regen in Spae 1 O technica res in comn 10 *) Die Gi.itigkeit des Zertifikates ist an eine gi.ite Zertifizierng gemab ISO 9001:2008 gebnden The vaidity of the certificate is connected to a va id certification in accordance with ISO 9001:2008
Indstrie Service Getngsbereich der Oberprfng as Hersteer von Werkstoffen nach -Merkbatt W O Scope of the approvai - Manfactrer of materia in accordance with -Merkbatt W O nage zm Zertifiat Nr. nnex to certificate no. DGR--QS-W 55120021MUC von dated 2013-01-15 Hersteer Manfactrer: ITLFOND S.p.. Strar..e/Street: Via Indstriae, 1 Ort/City: 25021 Bagnoo Mea (BS) Werk pant: Nationaitat:/ Contry: Datm:/ Batt-Nr.:/ Date: Page No.: 2013-01 -15 2v. /of4 Zertifizierngsstee tr Drckgerate Certification Body for pressre eqipment Benannte Stee, Nr. Notified Body, No. fd. Werkstoffbezeichnng Werkstoff- Liefer- Prfgegenstand Nr. Werkstoff-Nr. Spezifikation zstand Erzegnisform No. Materia! Designation Materia Deivery Description Materia! Grade Specification Condition Prodct rt/ Nr. Krze No. Code 1 T 2 3a 3b 4 5 09 11.4301, 1.4303, 1.4306, 1.4311, DIN 17440 1.4401, 1.4404, 1.4435, 1.4436, 10272 warmebehandet 1.4438, 10222-5 forged bar, anneaed bmessngen Dimensions Dicke Drchm. Thickness Diameter [m m] [m m] von bis von bis from t o from t o 6a 6b?a 7b 140 500 150 500 Gewicht Weight Prfgrndagen Technische Regen Reqirements Technica Res 1 = t 2 = kg Wert rt/ Nr. /No..j. vae Ba 8b 9a T 9b T 10 W 2 Bemerkngen Remarks 10 1.4550, 1.4541, 1.4571 DIN 17440 -..- 10272 100 350 150 350 11 11.4313 VdTUV 395/3 v -,- mit Einzegtachten with singe expertise 12 1.4462 VdTUV 418 -.. - 100 400 140 400 13 1.4305 DIN 17440 -,.- 10222-5 14 1.4501 10888-3 -,- Bericht Nr. report no. 1927821 vom dated 2013-01-15 Erkarng Expanation: = iisngsgeght nd abgeschreckt sotion anneaed and qenched L= iisngsgeght sotion anneaed N = normageght normaized S = spannngsarmgeght stress reieved TM = thermomech. behandet thermo-mech. treated U = ngeght not anneaed V= vergtet nd angeassen qenched and tempered CR = temperatrgereget warmmgeformt controed roed G = weichgeght anneaed a= Werkstoffbezeichnng in Spae 10 materia! designation in comn 10 b = Lieferzstand in Spae 10 deivery condition in comn 10 c= Prfgegenstand in Spae 10 object in comn 10 d = bmessng gem. tech. Regen dimensions ace. to technica res e= Gewich gem. tech. Regen weight ace. to technica res f = Nr. der tech. Regen in Spae 10 technica r es in comn 1 O *) Die Gtigkeit des Zertifikates ist an eine goite Zertifizierng gemab ISO 9001 :2008 gebnden The vaidity of the certificate is connected to a va id certification in accordance with ISO 9001:2008
Indstrie Service Getngsbereich der Oberprfng as Hersteer von Werkstoffen nach DGR 971231EG, nhang, bschnitt 4.3 nage zm Zertifiat N r. nnex to certificate no. Scope of the approvai - Manfactrer of materia! in accordance with PED 971231EC, nnex, Section 4.3 DGR--QS-W 55120021MUC von dated 2013-01 -15 Hersteer ITLFOND S.p.. Nationaitat:/ Datm:/ Batt-Nr.:/ Zertifizierngsstee fir Drckgerate Manfactrer: Stra Be/Street: Via Indstriae, 1 Contry: Date: Page No.: Certification Body for pressre eqipment Ort/City: 25021 Bagnoo Mea (BS) Werk pant: 2013-01-15 3v./of4 Benannte Stee, Nr. Notified Body, No. fd. Werkstoffbezeichnng Werkstoff- Liefer- PrOfgegenstand bmessngen Gewicht/ PrOfgrndagen Bemerkngen Nr. Werkstoff-Nr. Spezifikation zstand Erzegnisform Dimensions Weight Technische Regen Remarks No. Materia! Designation Materia Deivery Description Reqirements Materia! Grade Specification Condition Prodci Technica Res Dicke Drchm. Thickness Diameter 1 = t [m m] [m m] 2 = kg rt/ Nr./ KOrze von / bis von / bis Wert rt/ Nr. No. from Soec. No. Code t o from t o ~ vae 1 1 2 3a 3b 4 5 6a 6b 7a 7b 8a 8b 9a 1 9b T 10 01 11.4301, 1.4303, 1.4306, 1.4311, DIN 17440 Bock ingot 140 1 ) 700 1 ) 160 700 1 21 ' Qadratischer Qerschnitt sqare 1.4541, 1.4550, 1.4401, 1.4404, 10088-3 ngegioht section 1.4406, 1.4571, 1.4580, 1.4429, forged bar, not anneaed 1.4435, 1.4436, 1.4438, 1.4439 02 1.4462 SEW 400 " 1140 1 ) 1700 1 ) 1160 1700 11 121 Bei Verwendng der Werkstoffe in Spate 2 bis 4 sind die Festegngen 03 11.4313 VdTUV 395/3 1-.. - 1 21 n d Grenzen des jeweiigen Rege 1140 1 ) 1700 1 ) 160 700 werkes z beachten Fr die 04 1.4547, S31254 Spezifischen Einsatzbedingngen der VdTUV 1473,... 1140 ~ 700 1 ) 160 700 1 21 Werkstoffe ist die Zstimmng des STM 276 Drckgeratehersteers bzw. der zstandigen Benannten Stee 04 11.4418 ISEW 1400 IU,.... 1140 1 ) 700 1 ) 160 700 1 21 erforderich. For the se of materias ace. to comn 2 ti 4 the regations and imits of the 05 1.4876 SEW 1470 IU,-..- 1140 11 700 1 ) 160 700 1 21 respective standards have to be observed. The specific materia! operating conditions have to be 06 11.4539, 1.4466, 1.4501, 1.4542 110088-2 -..- 140 1 ) 700 11 160 700 1 21 approved by the pressre eqipment manfactrer or respectivey by the Notified Body in charge. 1-.. - 1140 1 ) 1700 11 1160 1700 11 121 Bericht Nr. report no. 1927821 07 1.4406, 1.4021, 1.4028 110088-3 vom dated 2013-01-15 Erkarng Expanation: = osngsgeght nd abgeschreckt sotion anneaed and qenched L= osngsgeght sotion anneaed N = normageght normaized S = spannngsarmgeght stress reieved TM = thermomech. behandet thermo mech. treated U = ngeght not anneaed V = vergtet nd angeassen qenched and tempered CR = temperatrgereget warmmgeformt controed roed G = weichgeght anneaed a= Werkstoffbezeichnng in Spae 10 materia! designation in comn 10 b = Lieferzstand in Spae 10 deivery condition in comn 10 c= Prfgegenstand in Spae 10 object in comn 10 d = bmessng gem. tech. Regen dimensions ace. to technica res e= Gewicht gem. tech. Regen weight ace. to technica res f = Nr. der tech. Regen in Spae 10 technica res in comn 10 *) Die GUitigkeit des Zertifikates ist an eine gi.ite Zertifizierng gemab ISO 9001:2008 gebnden The vaidity of the certificate is connected to a va id certification in accordance with ISO 9001 :2008
Indstrie Service Getngsbereich der Oberprfng as Hersteer von Werkstoffen nach DGR 971231EG, nhang, bschnitt 4.3 Scope of the approvai- Manfactrer of materia! in accordance with PED 971231EC, nnex, Section 4.3 nage zm Zertifiat Nr. nnex to certificate no. DGR--QS-W 55120021MUC von dated 2013-01-15 Hersteer Manfactrer: Straf:.e/Street: Ort/City: ITLFOND S.p.. Via Indstriae, 1 25021 Bagnoo Mea (BS) Werk pant: Nationaitat:! Contry: Datm:/ Date: 2013-01-15 Batt-Nr.:/ Page No.: 4v./of4 Zertifizierngsstee tr Drckgerate Certification Body for pressre eqipment Benannte Stee, Nr. Notified Body, No. fd. Nr. / No. 08 09 10 11 12 13 14 15 Werkstoffbezeichnng Werkstoff-Nr. Materia! Designation Materia! Grade 2 1.4301, 1.4303, 1.4306, 1.4311, 1.4401, 1.4404, 1.4435, 1.4436, 1.4438, 1.4550, 1.4541, 1.4571 1.4313 1.4462 1.4305 1.4501 316L(N)-IG X2CrNiMo17-12-2 (1.4404) with controed Nitrogen content rt/ 3a DIN Nr./ No. 3b 17440 10272 10222-5 DIN 117440 10272 VdTUV 395/3 VdTUV 418 Werkstoff- Spezifikation Materia Specification Lieferzstand Deivery Condition Krze/ Code 4 V DIN 117440 10222-5 2) 3) 10888-3 Prfgegenstand Erzegnisform Description Prodct 5 warmebehandet forged bar, anneaed Bock ingot warmebehandet forged, heat treated bar Bock ingot warmebehandet forged, bmessngen Dimensions Dicke Drchm. / Thickness Diameter [m m] [m m] von bis von bis from t o from t o 6a 6b 7a 7b 140 500 150 500 100 350 150 350 100 400 140 400 100 500 150 500 100 500 150 500 Gewicht Weight 1 =t 2 = kg ~ Wert vae 8a 8b Prfgrndagen Technische Regen Reqirements Technica Res rt/ 9a Nr./ No. 9b Bemerkngen Remarks 10 2 1 as defined in the specifications ITER_D_2DX6KS, ITER_D_2EFZGP and Section 2 of RCC-MR Edition 2007 3 1 as defined in Section 2 of RCC-MR Edition 2007- RM 3324: Bars Bei Verwendng der Werkstoffe in Spate 2 bis 4 sind die Festegngen nd Grenzen des jeweiigen Regewerkes z beachten Fiir die Spezifischen Einsatzbedingngen der Werkstoffe ist die Zstimmng des Drckgeratehersteers bzw. der zstiindigen Benannten Stee erforderich. For the se of materias ace. to comn 2 ti i 4 the regations and imits of t he respective standards have to be observed. The specific materia! operating conditions have to be approved by the pressre eqipment manfactrer or respectivey by the Notified Body in charge. Bericht Nr./ report no. 1927821 vom dated 2013-01-15 Erkarng Expanation: = osngsgeght nd abgeschreckt sotion anneaed and qenched L= osngsgeght sotion anneaed N = normageght normaized S = spannngsarmgeght stress reieved TM = thermomech. behandet thermo-mech. treated U = ngeght not anneaed V= vergtet nd angeassen qenched and tempered CR = temperatrgereget warmmgeformt controed roed G = weichgeght anneaed a= Werkstoffbezeichnng in Spae 10 materia! designation in comn 10 b = Lieferzstand in Spae 10 deivery condition in comn 10 c= Prfgegenstand in Spae 10 object in comn 10 d = bmessng gem. tech. Regen dimensions ace. to technica res e = Gewicht gem. tech. Regen weight ace. to technica res f = Nr. der tech. Regen in Spae 1 O technica r es in comn 1 O *) Die Giitigkeit des Zertifikates ist an eine giite Zertifizierng gemab ISO 9001:2008 gebnden The vaidity of the certificate is connected to a vai d certificati an in accordance with ISO 9001:2008