Umschaltventile Magnet DFE1/3 estellnr. Typ 2-11-1 DFE1/318ES-W22-12VDC 2-11-1 DFE1/318ES-W22-24VDC 24-2-116 DFE1/318ES-Y22-12VDC 24-2-117 DFE1/318ES-Y22-24VDC Weitere Umschaltventil Varianten auf nfrage möglich! Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
DFE with solenoid control Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm 2 /s -- 46 cst viscosity at 4 C temperature. DFE2 DFE1 DFE2 N. of available ways 2--3--6--8 3--6 3--6 Nominal flow rating in steady conditions 6 l/min 9 l/min 14 l/min Operating pressure (maximum)* vailable nominal voltage without drain with drain VDC bar 29 psi 3 bar 46 psi 12--24 48--11 bar 29 psi 3 bar 46 psi bar 29 psi 3 bar 46 psi 12--24--48 12--24 VC Hz (with C4 connector) 24--11--22 11--22 24--11--22 otenza nominale W 4 6 6 Internal leakage () T Fluid p= bar 14 psi with fuid and valve at 4 C 7 cm 3 /min.43 in 3 /min 1 cm 3 /min.61 in 3 /min Mineral base oil Fluid temperature with NR seals da --2 a 8 C with FM seals da --2 a C Viscosity operating range da a 7 mm 2 /s -- from to 7 cst minimum maximum 12 mm 2 /s -- 12 cst 4 mm 2 /s -- 4 cst Max. level of contamination 19/16 -- ISO 446 mbient temperature da --4 a 6 C cm 3 /min.92 in 3 /min NOTE -- For different working conditions please contact Customer Service. (*) -- This value is reachable only in steady conditions; for dynamic working conditions see the pages from 49 to 2. Standard threads LL ORTS S (ISO 228/1) UN -UNF (ISO 11926-1) DFE2 G 3/8 3/4--16 UNF--2 (SE 8) DFE1 G 1/2 7/8--14 UNF--2 (SE 1) DFE2 G 3/4 1 1/16--12 UN--2 (SE 12) DRIN ORT L G 1/4 7/16--2 UNF--2 (SE 4) Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
with solenoid control DFE Hydraulic circuit 2 -way vailable as body only in DFE2/2 execution; for other executions 3--way body is used. lug and return spring kit Solenoid ody Spool Spool type Spool type erformance data drop versus flow Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) 2 1 Spool () 4 3 4 3 2 4 6 8 2 4 6 Without drain With drain Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
DFE with solenoid control Hydraulic circuit 3 -way It s possible to obtain 2--way diverter valve plugging port or. Spool type Spool type Spool type D erformance data drop versus flow: () DFE2/3 DFE1/3 DFE2/3 2 2 2 1 Spool () 1 Spool () ressione 1 Spool Spool 2 4 6 8 3 6 9 12 6 12 18 ortata (l/min) Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE2/3 DFE1/3 DFE2/3 4 3 4 4 3 4 4 3 4 3 3 3 2 4 6 3 6 9 3 7 14 With drain Without drain Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
with solenoid control DFE Hydraulic circuit 6 -way C D E F Spool type Spool type Spool type H E C F D E C F D E C F D erformance data drop versus flow: E(C). DFE2/6 DFE1/6 DFE2/6 2 2 2 1 Spool () 1 Spool () 1 Spool Spool 2 4 6 8 4 8 12 6 12 18 Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE2/6 DFE1/6 DFE2/6 4 3 4 4 3 4 4 3 4 3 3 3 2 4 6 3 6 9 3 7 14 With drain Without drain Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
DFE with solenoid control Hydraulic circuit 8 -way F G E D C H 1 2 E FCDGH Spool type E FCDGH Spool type erformance data drop versus flow C Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) 3 2 1 Spool Spool 4 3 4 3 4 3 2 4 6 8 2 4 6 With drain Without drain Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
with solenoid control DFE1 Dimensional data 3 -way DFE1/3 valve 74 2.91 12 1.97.47 2.98 6 2.6 Emergency manual override 7 1.2 32. 121.28.4 1.28 213. 4.76 8.41 36 1.42 18 8.3 n.3 holes.33.71 62 2.44 4 1.7 46. 1.83 4 1.77 23.91 22..89 6 -way DFE1/6 valve 88. 3.48 6 2.6 32. 1.28 N 3 holes 6.2 2.21 8.3.33 8.4 3.36 112.4 4.43 1 2 1 2 64 64 2.2 2.2 Emergency manual override 11.7.46 7 34.7 43 121.28 1.37 1.69 24.4 4.76 9.46 Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
DFE1 with solenoid control Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - <CVN> 1. 2. 3. 4. 3.. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 3. 3. 1. 3- way body W Y 2. 3- way spool 4. I 6- way body 6- way spool 4.. Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
with solenoid control DFE1 Ordering codes 3- way 1. ody * DFE1/3 3CO224132 Standard body, S threaded 2. Spool options 3CS11341 3 -way, 2 positions with ports connected in transit position 3CS11441 3 -way, 2 positions with ports closed in transit position D 3CS14 3 -way, 2 positions, without transit position, with ports closed in rest position 6- way 1. ody * DFE1/6 3CO2242322 Standard body, S threaded 2. Spool options 3CS11641 6 -way, 2 positions with ports connected in transit position 3CS11741 6 -way, 2 positions with ports closed in transit position H 3CS1184 6 -way, 2 positions, D C in position 1, F E in position 2, ports closed in transit position N 3CS1192 6 -way, 2 positions with ports closed in transit position, with check valve 3. ositioner kits page 64 18...W T2 Spring return in position 1 18...Y GIU4 * Spring return in position 1, with G1/4 drain port 4. Tube assembly page 64 ES SOL16 Spring return in position 1 (without coil). Coil options page 64 12 - Without coil (only with tube kit) VDC supply (connector C2) 22-12VDC 4SOL1612 Coil with 12VDC nominal voltage 22-24VDC 4SOL1624 Coil with 24VDC nominal voltage 22-48VDC 4SOL1648 Coil with 48VDC nominal voltage VC supply (connector C4) 22-92VDC 4SOL1694 Coil with 92VDC nominal voltage (for 11VC) 22-192VDC 4SOL16192 Coil with 192VDC nominal voltage (for 22VC) I Optional connectors page 8 C2 2X11 ccording ISO44 C4 2X14 ccording to ISO44 with rectifier I I orts plug G1/2 3XT72718* ody conversion from 3 -way to 2 -way circuit NOTE (*) - Codes are referred to S thread. Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
DFE1 with solenoid control ositioner kits 18W kit Spring return in position 1 with plug. lug - wrench 17 42 Nm / 31 lbft Return spring 7.1.28 18Y kit Spring return in position 1, with G1/4 joint for drain. L Joint - wrench 27 42 Nm / 31 lbft L G1/4 23.3.92 Return spring Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 64 DGR2E 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.
with solenoid control DFE1 Solenoid parts ES tube assembly 2. 1. Wrench 13 24 Nm / 17.7 lbft M22x1. 1 4.3 129..1 Manual tightening; max. torque 6.6 Nm / 4.9 lbft ush for manual override Operating features lunger stroke............. : 1.2 mm /.4 in Coil options Thermoplastic protective covering Connection ISO44 (needs C2 connector, see page 8) 76 2.99 6 2.6 2. 1. 62 2.44 Operating features Nominal voltage........... : 12-24 -48-92 -192VDC Nominal voltage tolerance... : 1% ower rating.............. : 6 W Duty cycle................ : % Weather protection......... : I66 Coil insulation............. : Class H 78 3.7 Dauner ntriebstechnik GmbH Industriestraße 3 9612 ischberg Trosdorf 24-2 Tel.: 93/8- Fax: 93/8-49 Email: info@dauner-antriebstechnik.de www.dauner-antriebstechnik.de Die Inhalte unserer Seiten wurden mit größter Sorgfalt erstellt. Für die Richtigkeit, Vollständigkeit und ktualität der Inhalte können wir jedoch keine Gewähr übernehmen.