Serviceinformation Nr. 02/11 vom: 06.10.2011 von: BAM 1. Software Navigator und Release Notes Auf unserer Homepage unter www.idm-energie.at/de/navigator-software.html steht ab sofort eine neue Version der Navigator-Software (T1.1f und C1.1g) und der Release Notes zur Verfügung. 2. Software-Updates im Zuge der Inbetriebnahme Software-Updates im Zuge der Inbetriebnahme können nicht verrechnet werden. 3. Einbau Kühlventil Das Kühlventil M61 muss immer im Heizkreis-Vorlauf eingebunden werden, damit es nicht zu Fehlzirkulationen kommt. Im Heizkreis-Rücklauf ist kein Kühlventil notwendig! Seite 1
4. TERRA MAX 130 Die Hoch-/Niederdruckpressostate werden werkseitig eingestellt und müssen bei der Inbetriebnahme überprüft werden. Werkseitige Einstellung: R407C Hochdruck: aus 27bar R134a Hochdruck: aus 24bar Niederdruck: aus 2,6bar / ein 3,8bar Niederdruck: aus 0,8bar / ein 1,4bar Für die TERRA MAX 130 gibt es eine eigene Navigator-Software. Die Software C1.1g kann nicht verwendet werden! 5. TERRA ML Elektrischer Anschluss Folgende Kabelquerschnitte und Absicherungen sind als Zuleitung zu verwenden: ML 6 BA: Spannungsversorgung Außengerät 1~230V: 4x4mm² - Absicherung 20A (Typ C,K) Spannungsvers. E-Heizstab 3~400V: 5x1,5 mm² - Absicherung 13A (Typ C,K) Spannungsvers. Steuerstrom 1~230V: 3x1,5 mm² - Absicherung 13A (Typ C,K) ML 12 HGL: Spannungsvers. Hauptstrom 3~400V: 5x6mm² - Absicherung 25A (Typ C,K) Spannungsvers. E-Heizstab 3~400V: 5x1,5 mm² - Absicherung 13A (Typ C,K) Spannungsvers. Steuerstrom 1~230V: 3x1,5 mm² - Absicherung 13A (Typ C,K) 6. TERRA ML 6 BA Das Servicehandbuch für die TERRA ML 6 BA steht auf unserer Homepage unter www.idm-energie.at/en/terra-ml.html zum Download zur Verfügung. Das Servicegerät zum Anschluss an die Inneneinheit ist bei uns unter Art.-Nr.: 503303 zum Preis von 191,40 erhältlich. Das Servicegerät zum Anschluss an die Außeneinheit Art.-Nr.: 503302 zum Preis von 121,00. Servicegerät Inneneinheit Servicegerät Außeneinheit Seite 2
7. Garantiepauschalen Im Anhang die Liste mit den aktuell gültigen Pauschalbeträgen für die Abgeltung von Garantieaufwendungen. 8. Ersatzteilpreisliste 2012 Die neue Ersatzteilpreisliste 2012, gültig ab 1.November 2011, steht auf unserer Homepage unter www.idm-energie.at/de/preisliste-datanorm.html zum Download zur Verfügung. Die gedruckte Version Art.-Nr.: 812331 kann bei uns unter team@idm-energie.at angefordert werden. 9. Navigator 1.0 - Funktionsbeschreibung Auf unserer Homepage, unter www.idm-energie.at/de/navigatordokumentation.html steht ab sofort eine neue Version der Navigator Funktionsbeschreibung zur Verfügung. 10. Kundendienst Die Mitarbeiter von IDM-Kundendiensten können bei uns unter rud@idmenergie.at Langarm-Polos bestellen. Bitte bei Bestellung die Größe angeben! Seite 3
Service information Nr. 02/11 date: 06.10.2011 from: BAM 1. Software Navigator and Release Notes On our Homepage, www.idm-energie.at/en/navigator-10.html a new version of the Navigator-Software (T1.1f and C1.1g) is available, the Release Notes too. 2. Software-Updates in the course of commissioning The accounting for software-updates in course of commissioning is not possible. 3. Installation cooling valve The cooling valve M61 must be placed in the heating circuit flow pipe. In this case a false circulation is not possible. A cooling valve in the heating circuit return pipe is not necessary! Seite 4
4. TERRA MAX 130 The high and low pressure pressostates are setted by manufacturer and must be checked at commissioning. Preset manufacturer: R407C High pressure: off 27bar R134a High pressure: off 24bar Low pressure: off 2,6bar / on 3,8bar Low pressure: off 0,8bar / on 1,4bar For TERRA MAX 130 is a own Navigator-Software necessary. The Software C1.1g can not be used! 5. TERRA ML Wire cross section supply line Following cables and fuses are necessary: ML 6 BA: Power supply outdoor unit 1~230V: 4x4mm² - Fuse protection 20A (Typ C,K) Power supply E-heating immerser 3~400V: 5x1,5 mm² - Fuse protection 13A (Typ C,K) Power supply control current 1~230V: 3x1,5 mm² - Fuse protection 13A (Typ C,K) ML 12 HGL: Power supply main current 3~400V: 5x6mm² - Fuse protection 25A (Typ C,K) Power supply E-heating immerser 3~400V: 5x1,5 mm² - Fuse protection 13A (Typ C,K) Power supply control current 1~230V: 3x1,5 mm² - Fuse protection 13A (Typ C,K) 6. TERRA ML 6 BA The service device for connection to the indoor unit has the Art.-No.: 503303 and costs 191,40. The service device for connection to the outdoor unit has the Art.- No.: 503302 and costs 121,00. Service device indoor unit Service device outdoor unit Seite 5
6. Spare part price list 2012 The new spare parts price list 2012, valid from 1 st of November 2011, is available on our homepage, www.idm-energie.at/en/price-list.html. The printed version art.- no.: 812332 can be requested under team@idm-energie.at. 7. After sales service The members of an IDM after sales service could order long-arm polo-shirts, under rud@idm-energie.at - Please tell us the size! 8. Navigator 1.0 Functional description On our Homepage, www.idm-energie.at/en/navigator-10.html a new version of the Navigator functional description is available. Seite 6