Schrumpfschlauch Heatshrink tubing Gaine Thermorectractable
|
|
- Alfred Hofer
- vor 6 Jahren
- Abrufe
Transkript
1 Schrumpfschlauch Heatshrink tubing Gaine Thermorectractable & Raychem 1
2 NC 201 2:1 Shrink ratio Shrinktemperature >90 C Halogen free Operating temperature 55 C to +125 C NC 201 is a flexible general purpose polyolefin designed for commercial use, where a low shrink temperature is an important factor. Inches mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Recovered Wall Thickness (mm) 3/ / / / / / / / / / Standard colour: Specifications: FMVSS302 2
3 NC 201 Preisliste 2:1 Shrink ratio Shrinktemperature >90 C Halogen free Operating temperature 55 C to +125 C NC 201 is a flexible general purpose polyolefin designed for commercial use, where a low shrink temperature is an important factor. in Inch in mm 1-99m 100m 3/ / / / / / / / / / Standard colour: Specifications: FMVSS302 3
4 NF 201 2:1 Shrink ratio Shrinktemperature >90 C (except transparent > 100 C) Flame retarded (colours only) Operating temperature 55 C to +125 C NF 201 is a flexible general purpose flame retarded polyolefin tubing designed for commercial uses where cost is an important factor. Common uses include wire bundling, insulation, mechanical protection and identification. Inches mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Recovered Wall Thickness (mm) 3/ / / / / / / / / / Standard colours: transparent white yellow red blue Specifications: AMS-DTL-23053/5 Class 1 UL 224, 105 C CSA C22.2 No , OFT 4
5 NF 201 Preisliste 2:1 Shrink ratio Shrinktemperature >90 C (except transparent > 100 C) Flame retarded (colours only) Operating temperature 55 C to +125 C NF 201 is a flexible general purpose flame retarded polyolefin tubing designed for commercial uses where cost is an important factor. Common uses include wire bundling, insulation, mechanical protection and identification. Schwarz Farbig in Inch in mm 1-99m 100m 1-99m 100m 3/ / / / / / / / / / Standard colours: transparent white yellow red blue Specifications: AMS-DTL-23053/5 Class 1 UL 224, 105 C CSA C22.2 No , OFT 5
6 NF 201 Boxen 2:1 Shrink ratio Shrinktemperature >90 C (except transparent > 100 C) Flame retarded (colours only) Operating temperature 55 C to +125 C NF 201 is a flexible general purpose flame retarded polyolefin tubing designed for commercial uses where cost is an important factor. Common uses include wire bundling, insulation, mechanical protection and identification. Inches mm Standard Length per Box Price [SFr] per box 1-9 Pieces Price [SFr] per box 10 Pieces 3/64 1.2/0.6 12m /16 1.6/0.8 12m /32 2.4/ m /8 3.2/ m /16 4.8/ m /4 6.4/ m /8 9.5/ m /2 12.7/6.4 6m /4 19.1/9.5 5m / m Standard colours: transparent white yellow red blue Specifications: AMS-DTL-23053/5 Class 1 UL 224, 105 C CSA C22.2 No , OFT 6
7 NS 201 2:1 Shrink ratio Shrinktemperature >90 C (except transparent > 100 C) Self extinguishing (colours only) Operating temperature 55 C to +135 C NS 201 is a flexible general purpose self-extinguishing polyolefin tubing suitable for a wide range of applications including military or professional electronics. Common applications include insulation, marking, stain relief, mechanical protection and identification. Inches mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Recovered Wall Thickness (mm) 3/ / / / / / / / / / Standard colours: transparent white yellow red blue Specifications: AMS-DTL-23053/5 Class 3 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C VW1 CSA C22.2 No , OFT 7
8 NS 201 Preisliste 2:1 Shrink ratio Shrinktemperature >90 C (except transparent > 100 C) Self extinguishing (colours only) Operating temperature 55 C to +135 C NS 201 is a flexible general purpose self-extinguishing polyolefin tubing suitable for a wide range of applications including military or professional electronics. Common applications include insulation, marking, stain relief, mechanical protection and identification. Schwarz Farbig in Inch in mm 1-99m 100m 1-99m 100m 3/ / / / / / / / / / Standard colours: transparent white yellow red blue Specifications: AMS-DTL-23053/5 Class 3 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C VW1 CSA C22.2 No , OFT 8
9 NS 201 GYS 2:1 Shrink ratio Shrinktemperature >90 C Self extinguishing Operating temperature 55 C to +135 C NF 201 GYS is a flexible, self extinguishing co-extruded green/yellow striped tubing. This earthsleeving is suitable for insulation and identification for a wide range of applications. Inches mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Recovered Wall Thickness (mm) 1/ / / / / / / / / Standard colour: Green/yellow striped Other bi-colours striped tubing are available at special order. Specifications: AMS-DTL-23053/5 Class 3 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C VW1 CSA C22.2 No , OFT 9
10 NS 201 GYS Preisliste 2:1 Shrink ratio Shrinktemperature >90 C Self extinguishing Operating temperature 55 C to +135 C NF 201 GYS is a flexible, self extinguishing co-extruded green/yellow striped tubing. This earthsleeving is suitable for insulation and identification for a wide range of applications. in Inch in mm 1-99m 100m 1/ / / / / / / / / Standard colour: Green/yellow striped Other bi-colours striped tubing are available at special order. Specifications: AMS-DTL-23053/5 Class 3 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C VW1 CSA C22.2 No , OFT 10
11 NF 301 3:1 Shrink ratio Shrinktemperature >90 C Flame retarded (colours only) Operating temperature 55 C to +135 C NF 301 is a flexible tubing which offers a shrink ratio of 3:1. The high expansion ratio is designed for use when wide ranging substrate diameters need to be covered. NF 301 allows a smaller number of sizes to be stocked for a wide range of applications such as marking, strain relief, machanical protection and identification. mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Wall Thickness Recovered (mm) 1.5/ / / / / / / / Standard colours: white yellow red blue Specifications: AMS-DTL-23053/5 Class 1 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C CSA C22.2 No , OFT 11
12 NF 301 Preisliste 3:1 Shrink ratio Shrinktemperature >90 C Flame retarded (colours only) Operating temperature 55 C to +135 C NF 301 is a flexible tubing which offers a shrink ratio of 3:1. The high expansion ratio is designed for use when wide ranging substrate diameters need to be covered. NF 301 allows a smaller number of sizes to be stocked for a wide range of applications such as marking, strain relief, machanical protection and identification. in mm 1-99m Schwarz 100m 1-99m Farbig 100m 1.5/ / / / / / / / Standard colours: white yellow red blue Specifications: AMS-DTL-23053/5 Class 1 (colours) AMS-DTL-23053/5 Class 2 (transparent) UL 224, 125 C CSA C22.2 No , OFT 12
13 NFD 301 3:1 Shrink ratio Shrinktemperature >100 C Self extinguishing outer wall (colours only) Operating temperature 55 C to +110 C NFD 301 is a general purpose, flexible, high grade heat-shrinkable polyolefin tubing with a thermoplastic adhesive inner liner. The inner liner will melt and flow to seal and encapsulate the inner components, offering an environmental protection. mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Wall Thickness Recovered (mm) 3/ / / / / / / Standard colour: Specifications: AMS-DTL-23053/4 13
14 NFD 301 Preisliste 3:1 Shrink ratio Shrinktemperature >100 C Self extinguishing outer wall (colours only) Operating temperature 55 C to +110 C NFD 301 is a general purpose, flexible, high grade heat-shrinkable polyolefin tubing with a thermoplastic adhesive inner liner. The inner liner will melt and flow to seal and encapsulate the inner components, offering an environmental protection. mm 1-99m 100m 3/ / / / / / / Standard colour: Specifications: AMS-DTL-23053/4 14
15 NFD 401 4:1 Shrink ratio Shrinktemperature >100 C Self extinguishing outer wall (colours only) Operating temperature 55 C to +110 C NFD 401 is a general purpose, flexible, high grade heat-shrinkable polyolefin tubing with a thermoplastic adhesive inner liner. The inner liner will melt and flow to seal and encapsulate the inner components, offering an environmental protection. mm Minimum ID Supplied (mm) Maximum ID Recovered (mm) Wall Thickness Recovered (mm) 4/ / / / / / Standard colour: Specifications: AMS-DTL-23053/4 Class 3 15
16 NFD 401 Preisliste 4:1 Shrink ratio Shrinktemperature >100 C Self extinguishing outer wall (colours only) Operating temperature 55 C to +110 C NFD 401 is a general purpose, flexible, high grade heat-shrinkable polyolefin tubing with a thermoplastic adhesive inner liner. The inner liner will melt and flow to seal and encapsulate the inner components, offering an environmental protection. mm 1-99m 100m 4/ / / / / / Standard colour: Specifications: AMS-DTL-23053/4 Class 3 16
17 DR - 25 Anwendung: Aufgrund seiner Beständigkeit gegen Diesel und in der Luftfahrt verwendete Kraftstoffe, hydraulische Flüssigkeiten und Schmieröle eignet sich dieser Schlauch hervorragend für Anwendungen, wo Robustheit und Flüssigkeitsdichte gefordert sind. Einsatzmöglichkeiten bieten beispielsweise militärische Fahrzeuge, wo er zum Schutz von Kabeln und Leitungsbäumen verwendet wird. Betriebstemperaturbereich: -75 C bis +150 C (nach VG Teil 5 Typ D) Eigenschaften/Vorteile: 2:1 Schrumpfverhältnis Dauerhaft beständig gegen Flüssigkeiten und Hitze Dickwandiger, flexibler Schlauch für Kabelbäume Zuverlässiger Schutz gegen Abrieb und mechanische Beschädigung Installation: Min. Temperatur für vollständige Schrumpfung: +175 C Ø bei Lieferung (mm) Ø nach vollständiger Schrumpfung (mm) Wanddicke nach Schrumpfung (mm) 1/ ± / ± / ± / ± / ± / ± ± / ± ± ± 0.50 Standardfarben: Schwarz Spezifikationen: MIL-DTL-23053/16 VG Teil 5 Typ D 17
18 Formteile Verzweigteile Anwendung Bestellnummer Typische Formen Überhänge mit mehreren Abzweigungen 302V111 bis 705V174 T-Abzweigungen 301A011 bis A511 bis A112 bis Abzweigung 342A012 bis Abzweigung 362A014 bis 114 Y-Abzweigungen 381A301 bis A012 bis 046 Abzweigungen 3 auf 1 Kabel 462A011 bis A421 bis 424 Abzweigung 4 auf 1 Kabel 562A011 bis 067 Diverse Formteile Anwendung Bestellnummer Typische Formen Kabeldurchführung 207W213 bis 256 FTS/CES D-Subminiatur Endgehäuse 214P009 bis 037 Endkappen 101A011 bis L/SSC 18
19 Formteile Steckerendgehäuse Anwendung Bestellnummer Typische Formen Steckerendgehäuse mit Lippen für den Anschluss an Steckeradapter Steckerendgehäuse ohne Lippen für den direkten Anschluss an Rundsteckverbinder 202D121 bis D121 bis K121 bis K121 bis A111 bis A111 bis 196 Slim-Line Steckerendgehäuse mit Lippen für den Anschluss an Steckeradapter Slim-Line Steckerendgehäuse mit Lippen für den Anschluss an Steckeradapter bei einem offenen Kabelbaum Faltbares Steckerendgehäuse mit Lippen für den Anschluss an Steckeradapter Steckerendgehäuse für D- Subminiatur Stecker 202D211 bis D211 bis F211 bis F211 bis D921 bis D921 bis C611 bis A011 bis A011 bis A311 bis A111 bis A611 bis
20 Heissluftgebläse: Heiss begehrt In Haus, Hof und Garten gehören STEINEL Heissluftgebläse längst zu den ganz grossen Werkzeughits. Ob es darum geht Lack zu entfernen, PVC-Folien zu verschweissen, Kunststoffe zu biegen, Kupferrohre zu löten, oder auch nur einfach darum, etwas zu trocknen oder aufzutauen: mit den heissen Helfern vom Marktführer und Heissluftgebläse Spezialisten STEINEL sind diese und hundert andere Arbeiten ebenso schnell wie sauber erledigt. Thermo-Power HL 2305 LCD HL 2005 E HL 1605 S Elektronisch geregeltes Heissluftgebläse mit Temperaturregulierung, LCD-Anzeige und Kaltstufe Elektronisch geregeltes Heissluftgebläse mit Temperaturregulierung und Kaltstufe. Heissluftgebläse mit 2 Heizstufen, Kaltstufe und extra grosser Luftleistung. Technische Daten HL 2305 LCD HL 2005 E HL1605 S Leistung: 2300W Leistung: 2000W Leistung: 1600W Netzanschluss: 230V,50Hz (Sonderspannungen möglich) Netzanschluss: 230V,50Hz (Sonderspannungen möglich) Netzanschluss: 230V,50Hz (Sonderspannungen möglich) Temperatur: 50 C-650 C Temperatur: 50 C-600 C Temperatur: 50 C/350 C/550 C Temp.-einstellung: stufenlos Temp.-einstellung: stufenlos Temp.-einstellung 3-stufig Temp-.anzeige: LCD Display 3-stufig 3-stufig Drehzahleinstellung: Drehzahleinstellung: Drehzahleinstellung: 3-stufig Luftstrom: l/min Luftstrom: l/min Luftstrom: l/min Gewicht: 920g Gewicht: 920g Gewicht: 900g Preis: Sfr Preis: Sfr Preis: Sfr
21 Heissluftgebläse: Heiss begehrt HL 525 S HL 1400 S HL 1800 E Heissluftgebläse mit 2 Heizstufen. Heissluftgebläse mit 2 Heizstufen. Elektronisch geregeltes Heissluftgebläse mit Temperaturregelung Technische Daten HL 525 S HL 1400 S HL 1800 E Leistung: 1400W Leistung: 1400W Leistung: 2000W Netzanschluss: 230V/50Hz (Sonderspannungen möglich Temperaturen: Stufe1= ca. 300 C Stufe2= ca. 500 C (5mm vor dem Ausblasrohr) Luftmenge: Stufe1= ca. 240 l/min Stufe2= ca. 450 l/min Netzanschluss: 230V/50Hz (Sonderspannungen möglich Temperaturen: Stufe1= ca. 300 C Stufe2= ca. 500 C (5mm vor dem Ausblasrohr) Luftmenge: Stufe1= ca. 240 l/min Stufe2= ca. 450 l/min Netzanschluss: 230V/50Hz (Sonderspannungen möglich Temperaturen: C stufenlos, (5mm vor dem Ausblasrohr) Luftmenge: Stufe1= ca. 300 l/min Stufe2= ca. 500 l/min Gewicht: 750g Gewicht: 550g Gewicht: 750g Preis: Sfr Preis: Sfr Preis: Sfr Unterschied: Elektronikgeräte - Stufengeräte Bei Elektronikgeräten bleibt die Temperatur durch die elektronische Regelung konstant. Deshalb können - im Gegensatz zu Stufengeräten - Reduzierdüsen für noch mehr Anwendungen eingesetzt werden. 21
22 Impressum Preise: Zahlung: Netto, exklusive MWST., ab Büren a. Aare unverpackt. 10 Tage mit 2% Skonto oder 30 Tage netto. Für Typen die nicht in der Preisliste enthalten sind oder für grössere Mengen fragen Sie uns bitte an. Wir unterbreiten Ihnen gerne ein günstiges Angebot. Preisänderungen und Währungsanpassungen vorbehalten. Copyright by Bütikofer Electronics GmbH, Büren a. Aare 22
Connectors + Computer Components
Connectors + Computer Components USB Buchse Serie 8317 PIN 04 08 Typ A & B 180 & 90 Tel.: 032 / 351 29 29 2 Datenbläter USB Buchsen Typ 8317 Tel.: 032 / 351 29 29 3 Connectors Computer Components Datenbläter
mit und ohne thermoplastischem Innenkleber lieferbar.
SCHRUMPF GEFLECHTSCHLÄUCHE Iolierung von Leitern wie beipielweie Stromchienen oer Kabelchuhen verwenet. Sie bieten Schutz vor mechanichen un - chläuche in in verchieenen Farben un Schrumpfraten, owie je
Cable specifications (see page 21) Cable specifications (see page 21)
Part No. Y-ConCable-1 4+2 Y-ConCable-2 4+0 for use with Y-Con series plugs, with 4 data and 2 power lines, with Y-Con series plugs, with 4 data lines, mit 4 Daten- und 2 Stromversorgungsleitungen, NICHT
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
MAK MAK. Power Application Systems. 8.0 / 12.0 mm. Hochstromkontaktsysteme. 8.0 / 12.0 mm
MK Power pplication Systems MK 405 MK Lamella terminal system with closed box 8.0 x 0.8 mm, 9.5 x 1.2 mm, 12.0 x 0.8 mm The MK power terminal series covers blade sizes 8.0 mm to 9.5 mm and 12.0 mm. They
Taster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
please return within 24 hrs to avoid delay in production
Splash 500cc White Antracite/Black White Splash 500cc Yellow Yellow Splash 500cc Red Red Splash 500cc Blue Attn. These colour bottles are more sentisive to marking than lighter products! This must be accepted
336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
FMC. 52 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
The extremely small FMC connector series Flexible Microstrip Connectors are designed for PCB applications in the tightest spaces. Using bullets, equalization of radial and axial misalignments in board-to-board
Anschlusskabel Connecting Cables
Anschlusskabel Connecting Cables Made in Germany Made in Germany Sichere Verbindungstechnik Safe connection method D 27.0813de www.di-soric.com di-soric Anschlusskabel sind die optimale Lösung, um alle
D-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
Westenberg Wind Tunnels
MiniAir20 Hand measurement device for flow, humidity and temperature The hand measurement device MiniAir20 is used for the acquisition of temperature, relative humidity, revolution and flow velocity such
Winkel + Flansche 9Angles + Flanges
Winkel + Flansche 9Angles + Flanges Winkel + Flansche/Angels + Flanges 367 Damit es sicher um die Ecke geht Turning the corner safely 1 2 368 Winkel + Flansche/Angels + Flanges Praktische Winkelverschraubungen
Interconnection Technology
Interconnection Technology Register: 23 Date: 25.05.99 Measuring leads from Hirschmann Following measuring leads are replaced by the next generation. Additionally connectors and sockets in the same design
Ultraschallsensoren ultrasonic sensors
Zylindrisch cylindric Rechteckig cuboid erfassen mithilfe von Schallwellen berührungslos und verschleißfrei eine nahezu alle Objekte. Dabei spielt es keine Rolle, ob das Objekt durchsichtig, metallisch,
Konvertierungstabellen Normen
Normen DIN EN ISO 1127 DIN 2391 DIN EN 13480-3 DIN 2559 Nichtrostende Stahlrohre Maße, Grenzabmaße und längenbezogene Masse Nahtlose Präzisionsstahlrohre (Diese Norm gilt an sich nur für unlegierte Stähle.
EN 175301-803. Typenschlüssel Order code D I A B C. 3 3-polig / 3 poles 4 4-polig / 4 poles 0 Y G R D T L V E H1 (...9) C S 1 PG 11 9 PG 9
Typenschlüssel Order code G Gerätesteckdose / Connector D I DIN Industrienorm / Industrial A B C Bauform A / form A Bauform B / form B Bauform C / form C 3 3-polig / 3 poles 4 4-polig / 4 poles 0 Y G R
HF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
LWL Transceiver 9 x 1 SIP 650nm
LWL Transceiver 9 x 1 SIP 650nm Bild/Pic. 1 1 Allgemeine Beschreibung Der 9 x 1 Transceiver ist speziell geeignet für Anwendungen mit dem 1mm Standard- Kunststofflichtwellenleiter. Bestückt mit einer schnellen
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Ausweis-Nr. / Certificate No. 40010145 Blatt / page 2 Name und Sitz des Genehmigungs-Inhabers / Name andregistered seat of the Certificate holder
Kaltlichtquellen. Fibre Optic Light Sources
Kaltlichtquellen Fibre Optic Light Sources 24 LED Lichtquellen 12-300L-A LED Lichtquelle 1000: stufenlose Helligkeitsregulierung, LED-Lebensdauer > 20.000 Betriebsstunden, Lichtintensität ähnlich 100 W
INSTALLATION AND OPERATING INSTRUCTIONS FOR LPS203-M LPS203-M 操 作 指 示
BEDIENUNGSANLEITUNG To comply with the published safety standards, the following must be observed when using this power supply. Um den zur Zeit gültigen Sicherheitsbestimmungen zu genügen, müssen die nachstehenden
Instrument table HT-020. description/ technical data. table height min.: 650mm table height max.: 1320mm tabletop Multiplex beech: 700x 460mm.
Wagner&Guder UG(mbH) & Co.KG HT-020 Multiplex beech: 700x 460mm table weight: 40kg 6x multiple socket 230VAC Schuko under table with wheels, two of them with brakes Wagner&Guder UG(mbH) & Co.KG HT-100
Lufft UMB Sensor Overview
Lufft Sensor Overview Wind Radiance (solar radiation) Titan Ventus WS310 Platinum WS301/303 Gold V200A WS300 WS400 WS304 Professional WS200 WS401 WS302 Radiance (solar radiation) Radiation 2 Channel EPANDER
1. Auftraggeber client. 1.1. Firmenname: company name: 1.2. Straße: street: 1.3. Ort: place: 1.4. Telefon: phone: 1.5. Fax: fax:
Seite 1 von 10 page 1 of 10 Antrag zur Zertifizierung eines PV Moduls und einer Fertigungsstätteninspektion des zu zertifizierenden Produkts Information about the certificate owner and the manufacturing
Innovation in der Mikrobearbeitung
Presseinformation August 2011 / 1. von 3 Seiten Werbung und PR Telefon (0 61 72) 1 06-461 Telefax (0 61 72) 1 06-213 E-Mail s.dillmann@wexo.com Innovation in der Mikrobearbeitung Neuer Mikrobohrer aus
114-18867 09.Jan 2014 Rev C
Application Specification 114-18867 09.Jan 2014 Rev C High Speed Data, Pin Headers 90 / 180 4pos., shie lded High Speed Data, Stiftleiste 90 / 180, geschirmt Description Beschreibung 1. Packaging of pin
Preisliste A ntrie bsrie m e n Price List Drive B elts > > > Teuerungszuschlag. Surcharge. Gültig ab 01. 04. 2011 Effective from 1 st April 2011
Teuerungszuschlag Surcharge Industrie-Riemen Industrial Belts 4,6 % gültig ab 1. April 2011 effective from 1 st April 2011 % Preisliste A ntrie bsrie m e n Price List Drive B elts > > > Gültig ab 01. 04.
Schüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide
Schüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide Schüco Fenster AWS 90.SI + als PASK Schüco Window AWS 90.SI +, tilt/slide Schüco 271 Parallel-Abstell-Schiebe-Kippsystem Tilt/slide
4 NEW COATINGS FOR TWEEZERS
Auszug aus unsere Preisliste - Seite 1 4 NEW COATINGS FOR TWEEZERS HTC Suffix -HTC High temperature Coating Resistance up to 620 C / 1150 BLACK EPOXY Suffix -EX Epoxy Coating 5 Mil. TEFLON Suffix -TE Temperature
PCMCIA IC MEMORY CARD PLUGS & SOCKETS
PCMCIA IC MEMORY CARD PLUGS & SOCKETS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
Simulation of a Battery Electric Vehicle
Simulation of a Battery Electric Vehicle M. Auer, T. Kuthada, N. Widdecke, J. Wiedemann IVK/FKFS University of Stuttgart 1 2.1.214 Markus Auer Agenda Motivation Thermal Management for BEV Simulation Model
Induktive Näherungsschalter inductive proximity switches
Zylindrisch DC cylindric DC Zylindrisch DC Vollmetall cylindric DC full metal Hochtemperatur high temperature Schweißfest weld resistant Druckfest pressure resistant Analog analog Namur namur AC AC Kunststoff
Quadt Kunststoffapparatebau GmbH
Quadt Kunststoffapparatebau GmbH Industriestraße 4-6 D-53842 Troisdorf/Germany Tel.: +49(0)2241-95125-0 Fax.: +49(0)2241-95125-17 email: info@quadt-kunststoff.de Web: www.quadt-kunststoff.de Page 1 1.
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Verdrahtungskanal zum Einbau in Schaltschränken Slotted
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Blankwiderstands-Durchflußerwärmer, geschlossen Bare Element
IMM. Eintauchpumpen mit offenem Laufrad Immersion pumps with open impeller. Leistungsdaten / Performance. n 2850 1/min
Werkstoffe / Materials Teile-Benennung / Description Pumpengehäuse Pump casing Laufrad Impeller Rotorwelle Shaft Deckel Cover Spritzring Deflector IMM 40-50 IMM 63-100 Aluminium / Stahl / GG Aluminium
3.1 Wärmeschrumpfende Schläuche 3.2 Geflecht- und Gewebeschläuche
Kabelschutz 3 Seite 3.1 Flussdiagramm für die optimale Produktauswahl 144 Anwendungsübersicht Wärmeschrumpfschlauch 146 Der passende Wärmeschrumpfschlauch 147 Warmschrumpfschläuche TCN20, 2:1, schnell
CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP
ANLEITUNGEN // INSTRUCTIONS CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP BEDIENUNGSANLEITUNG // INSTRUCTION MANUAL MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION MONTAGEANLEITUNG // ASSEMBLY INSTRUCTION KOPPLUNG
GIS-based Mapping Tool for Urban Energy Demand
GIS-based Mapping Tool for Urban Energy Demand Building Services, Mechanical and Building Industry Days Conference Johannes Dorfner Debrecen, 14 October 2011 Outline 1. Motivation 2. Method 3. Result 4.
Cable Tester NS-468. Safety instructions
Cable Tester NS-468 Safety instructions Do not use the cable tester NS-468 if it is damaged. This device is only for use inside dry and clean rooms. This device must be protected from moisture, splash
FK12 fortyforty (GRAUER MARMOR / GREY MARBLE)
FK12 fortyforty beistelltisch / side TABLE DESIGN: FERDINAND KRAMER, 1945 Der kombinier- und stapelbare Beistelltisch FK12 FORTYFORTY aus pulverbeschichtetem Stahl ist ein signifikantes Beispiel für die
BÜTIKOFER 52, CH-3294
FLEXSTRIP - Jumper Produktbeschreibung: FLEXSTRIP Jumper sind hochflexible Verbinder in Einkomponentenbauweise. Der FLEXSTRIP Jumper vereinigt in sich die Funktion des flexiblen Flachkabels und des Anschlusspins
K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn
K-2 is micro grain size carbide end mills for general purpose such as slotting, side cutting and profiling. K-2 ist ein Feinstkorn Vollhartmetallfräser für universellen Einsatz, wie Nutenfräsen, Seitenfräsen
Product name Order number Short description Seite. PDS0001 Show figure PDS_S_2A Aluminium skeleton with support and 2 arms and 2 legs 1
General Catalog Overview Show Figures: Standard PDS0001 Show figure PDS_S_2A Aluminium skeleton with support and 2 arms and 2 legs 1 PDS0002 Show Figure PDS_N_2A2L Aluminium skeleton with 2 arms and 2
TIUS I RETTANGOLARE. Schrank-Regal-System cabinet shelving system. Kollektions- und Preis-Informationen collection- and pricing informations
I RETTANGOLARE Schrank-Regal-System cabinet shelving system Kollektions- und Preis-Informationen collection- and pricing informations Stand/state: Oktober 2013 Beschreibung/Description: Schrank-Regal-System
Serviceinformation Nr. 02/11
Serviceinformation Nr. 02/11 vom: 06.10.2011 von: BAM 1. Software Navigator und Release Notes Auf unserer Homepage unter www.idm-energie.at/de/navigator-software.html steht ab sofort eine neue Version
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Durchflußerwärmer, geschlossen Instantaneous water heater,
TomTom WEBFLEET Tachograph
TomTom WEBFLEET Tachograph Installation TG, 17.06.2013 Terms & Conditions Customers can sign-up for WEBFLEET Tachograph Management using the additional services form. Remote download Price: NAT: 9,90.-/EU:
Leister SYSTEM SINGLE PATCH MODULE SPM 01
D GB Leister SYSTEM SINGLE PATCH MODULE SPM 01 Leister Process Technologies Galileo-Strasse 10 CH-05 Kaegiswil/Switzerland Tel. +41-41 4 4 Fax +41-41 4 1 www.leister.com sales@leister.com Einbauanleitung
miditech 4merge 4-fach MIDI Merger mit :
miditech 4merge 4-fach MIDI Merger mit : 4 x MIDI Input Port, 4 LEDs für MIDI In Signale 1 x MIDI Output Port MIDI USB Port, auch für USB Power Adapter Power LED und LOGO LEDs Hochwertiges Aluminium Gehäuse
MindestanforderungenanDokumentationvon Lieferanten
andokumentationvon Lieferanten X.0010 3.02de_en/2014-11-07 Erstellt:J.Wesseloh/EN-M6 Standardvorgabe TK SY Standort Bremen Standard requirements TK SY Location Bremen 07.11.14 DieInformationenindieserUnterlagewurdenmitgrößterSorgfalterarbeitet.DennochkönnenFehlernichtimmervollständig
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
2 LED-Lampen LED lamp Typ(en) / Type(s): 1) IG SL T8 2F 10W CC 2) IG SL T8 2F 10W FC 3) IG SL T8 4F 18W CC 4) IG SL T8 4F 18W FC 5) IG SL T8 4F 20W CC 6) IG SL T8 4F 20W FC 7) IG SL T8 5F 20W CC 8) IG
2 NEUHEITEN - NEWS 2014. MPE-Garry interconnecting your ideas
NEUHEITEN - NEWS 2014 2 NEUHEITEN - NEWS 2014 MPE-Garry interconnecting your ideas 712 Micro-USB-Steckverbinder in SMD-Ausführung Micro-USB-Connectors in Surface Mount Version Board termination Material
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
2 LED-Lampen LED lamp Typ(en) / Type(s): 1) IMS-VDE-0806-xxyz1B 2) IMS-VDE-1812-xxyz1E 3) IMS-VDE-2215-xxyz1H 4) IMS-VDE-2615-xxyz1M Warenzeicheninhaber Trademark holder Bemessungsspannung Rated voltage
Dualport Connectors. Product Description Produktbeschreibung. Dualport Steckverbinder. Dualport Steckverbinder. Dualport Connectors
Dualport Connectors Product Description Produktbeschreibung Advantages and Special Features Compact connector with dual assembly ( Dualport ) Multiple assembly combinations with various layouts available
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. PV-Wechselrichter mit selbsttätiger Freischaltstelle
DATENBLATT / FACT SHEET
DATENBLATT / FACT SHEET ART.-NR: WHISKY SODA LED WANDLEUCHTE / WALL LUMINAIRE LED.next Außenwandaufbauleuchte zur akzentuierten Beleuchtung von Fassaden und gebäudenahen Wegen. Gehäuse aus Aluminiumguss,
Order Number Bestellnummer. Hand crimp tool Handcrimpzange Positioner Einsatz Positioner Einsatz. Order Number. Bestellnummer
Crimpingtools for Miniature Connectors Crimpwerkzeuge für Miniatursteckverbinder Hand Crimp Tool M22520/2-01 for Machined Contacts Handcrimpzange M22520/2-01 für gedrehte Kontakte Die / Einsatz Hand crimp
fastpim 1 H fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC
fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC Copyright by Vincotech 1 Revision: 1 module types / Produkttypen Part-Number
SIMID 1210-100. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature
PNEUMATISCHE PUMPEN PNEUMATIC PUMPS
BVBA POMAC-LUB-SERVICES SPRL Korte Bruggestraat 28 B-8970 Poperinge Tel. 057/33 48 36 Fax 057/33 61 27 info@pomac.be internet: www.pomac.be EINLEITUNGSSCHMIERSYSTEM MIT VOLUMETRISCHEN DOSIERVENTILEN FÜR
Beschreibung. Process Description: Sartorius Bestellnummer / Order No.:
Q-App: USP Advanced Bestimmung des Arbeitsbereiches von Waagen gem. USP Kapitel 41 mit Auswertung über HTML (Q-Web) Determination of the operating range of balances acc. USP Chapter 41 with evaluation
Dampfzustandsregelventil DZE Steam conditioning valve DZE
Dampfzustandsregelventil DZE Steam conditioning valve DZE A-T Armaturen-Technik GmbH Babcock T-Bldg Tel.: +49 208 833 1700 E-Mail: sales@at-armaturen.com Duisburger Straße 375 46049 Oberhausen / Germany
Preisliste und Bestellformular (S. 1/2) FAX: +49-(0)231-9742-501
Preisliste und Bestellformular (S. 1/2) FAX: +49-(0)231-9742-501 Die Applikation wird vornehmlich Fluide 1 / Gase 1,2 befördern. 1 Einstellungen der mp-x: 100 Hz, 250 Vpp, SRS (DI-Wasser-Spezifikation:
Verarbeitungsspezifikation Application Specification. Verarbeitungsspezifikation. Application Specification MA-59V093. für for. Winkelstecker für PCB
Verarbeitungsspezifikation MA-59V093 für for Winkelstecker für PCB Right angle plug for PCB 59S2AF-40MXX-Y 59S2LF-40MXX-Y 59S2RF-40MXX-Y 59S2UF-40MXX-Y 200 09-0100 U_Winkler 11.02.09 100 08-v323 U_Winkler
RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
Titelbild1 ANSYS. Customer Portal LogIn
Titelbild1 ANSYS Customer Portal LogIn 1 Neuanmeldung Neuanmeldung: Bitte Not yet a member anklicken Adressen-Check Adressdaten eintragen Customer No. ist hier bereits erforderlich HERE - Button Hier nochmal
FC/PC- und FC/APC-Singlemode-, PM-Patchkabel und Steckerkonfektionen
FC/PC und FC/APCSinglemode, PMPatchkabel An vielen Geräten zur Datenübertragung, Sensorik, Medizintechnik, Steuerung und Industrieanwendung ist der FCSteckertyp, sei es als PC (physical contact) oder als
Polsterleder. Basis TEC
Polsterleder Basis TEC für Boote und Schiffe gemäß IMO für Automobile gemäß FMVSS302 für Flugzeuge gemäß FAR 25.853 für Schienenfahrzeuge für öffentliche Gebäude gemäß B1 und B2 5046 weiß/apeldoorn 5026
Darstellung und Anwendung der Assessmentergebnisse
Process flow Remarks Role Documents, data, tool input, output Important: Involve as many PZU as possible PZO Start Use appropriate templates for the process documentation Define purpose and scope Define
ZK2000SF ACCESS CONTROL ZUTRITTSKONTROLLE
ZUTRITTSKONTROLLE ACCESS CONTROL SMPX.xx SMPX.xG ZK2000SF Kommunikation über ISDN oder TCP/IP Intelligenter ler Individuelle Rechteverwaltung Verwaltung von 150.000 Personen Communication via ISDN or TCP/IP
KONFERENZ SCHULUNG PLANUNG MEETING PRESENTATION PLANNING
KONFERENZ SCHULUNG PLANUNG MEETING PRESENTATION PLANNING Kraftmagnet Power Magnet rund, Ø 38 mm, Höhe 13,5 mm, Haftkraft min. 2,5 kg round shape, Ø 38 mm, height 13,5 mm, power min. 2,5 kg 10, 11, 12,
GEA Heat Exchangers An/To: Von/From: Date/Datum. Dirk Graichen 2010. Product Manager BPHE
An/To: Von/From: Date/Datum Sales Dirk Graichen 2010 Product Manager BPHE 1. Isolierungen FCKW-frei PUR-Halbschalen, schwarz: Insulation: - FCKW-free polyurethane-foam with PS-folia, black GB../GN.. 100,200,220,240,300,400,418,420,500,525,700,
OPERATING ELEMENTS. 440020 (1,5 m) 440015 (1 m) 440030 (1,5 m) 440005 (1 m) MT 200 mit Plattform MT 200 with platform.
MT 400 m MT 400 w 440020 (1,5 m) 440015 (1 m) Mit nur zwei verschiedenen Abstrebungs- sowie Parallelogrammstangen und entsprechenden Kranarmsegmenten in 1m und 1,5m Länge, besticht die MT-Kranserie durch
UWC 8801 / 8802 / 8803
Wandbedieneinheit Wall Panel UWC 8801 / 8802 / 8803 Bedienungsanleitung User Manual BDA V130601DE UWC 8801 Wandbedieneinheit Anschluss Vor dem Anschluss ist der UMM 8800 unbedingt auszuschalten. Die Übertragung
ISO 15504 Reference Model
Prozess Dimension von SPICE/ISO 15504 Process flow Remarks Role Documents, data, tools input, output Start Define purpose and scope Define process overview Define process details Define roles no Define
3-Line Filters for Converters and Power Electronics B84143-G*-R110 B84143-G*-R112
B8443-G*-R0 B8443-G*-R2 Power line filters for three-phase systems Rated voltage 4/275 and 520/300 V~, 50/ Hz Rated current 8 to 220 A Construction Three-line filter Metal case Book size Features High
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
LS3/5A customer questionnaire
LS3/5A customer questionnaire LS3/5A BBC original 15 Ω Autotrafo 3 4 5 6 2 TAP SELECTOR 7 C 2A C 2B LOW INPUT HIGH BBC Original Version KEF B110 [SP1003) 8Ω Spendor Original Layout Please check the xover
EEX Kundeninformation 2007-09-05
EEX Eurex Release 10.0: Dokumentation Windows Server 2003 auf Workstations; Windows Server 2003 Service Pack 2: Information bezüglich Support Sehr geehrte Handelsteilnehmer, Im Rahmen von Eurex Release
Weltweit Partner der Holzindustrie Worldwide partner for the lumber industry
Konventionelle Holztrockner, Vakuumtrockner, Vortrockner, Hochtemperaturtrockner, Dämpfkammern, Spezialtrockner Heissdampftrockner, kombinierte Trocken- / Dämpfkammern, Temperaturbehandlungskammern Conventional
Syringes Cartridges. for Dosage Applications
Syringes Cartridges for Dosage Applications Syringes and Cartridges for Special Tip Cap Nozzle Legend Push-Pull Blind Plug Dimension B Tip Cap Dimension B Barrel Syringe Cartridge Piston with metal ring
www.elmeco.at Seite 46
Seite 46 Weich-PVC-Isolierschläuche 48 Silikonisolierschläuche 48 Farbige Silikonisolierschläuche 49 Hochtemperatur-Reflektorschild 49 Geflechtschläuche 50 Thermoschneider 50 Gewebeschrumpfschläuche 51
VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Halogenfreies Installationskabel mit verbessertem Verhalten im Brandfall für
Presentation of a diagnostic tool for hybrid and module testing
Presentation of a diagnostic tool for hybrid and module testing RWTH Aachen III. Physikalisches Institut B M.Axer, F.Beißel, C.Camps, V.Commichau, G.Flügge, K.Hangarter, J.Mnich, P.Schorn, R.Schulte, W.
PRO[E]MOTION DESIGN FUNCTION EMOTION
PRO[E]MOTION DESIGN FUNCTION EMOTION 2013 USB-Stick "Dento" USB stick "Dento" Artikel-Nr. / Ref.-No. 98996-0 USB-Stick "Snap" USB stick "Snap" Artikel-Nr. / Ref.-No. 98998-0 Hochwertiger Speicherstick
Honeywell AG Hardhofweg. D-74821 Mosbach MU1H-1220GE23 R1001
BA 95 Einbau-Anleitung Installation Instructions Einbau Installation Einbaubeispiel Installation example Ablaufleitung vorsehen Install discharge pipework Durchflussrichtung beachten! Consider direction
K210. Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!
K2 Catalogue / 11 Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!! Solid Carbide End Mills for Multi Purpose!! Vollhartmetallfräser für universellen Einsatz!!
Ein- und Ausgangsspannung 220-240V / Leistung: 800 VA / Abmessungen: 203 x 147 x 445mm / Gewicht: 20kg / Normenzertifikate: EN 60950, EN 60601-1
Produktinformationen Powervar ABCE800-22IEC USV POWERVAR Unterbrechungsfreier Strommanager Der neue Security One USM oder unterbrechungsfreier Strommanager, hat viele neue Funktionen zu bieten. Sie können
Release Notes BRICKware 7.5.4. Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
RAINBOW LINE : USB STICK : USB DRIVE. 2 GB 4 GB 2x4 GB 8 GB 16 GB Farbe: Kapazität: rot blau grün schwarz Material:
RAINBOW LINE 3502440-2 GB 3502450-4 GB 3502452-2x4 GB 2 GB 4 GB 2x 16 GB rot blau grün schwarz transparenter Kunststoff 6 g 65 x 19 x 9 mm 3502460-8 GB 3502470-16 GB 2 GB 4 GB 2x 16 GB red blue green black
VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung
Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Kunststoffschneidewerkzeug Plastic cutting tool Typ(en)
Qualitäts-Schneidsysteme für höchste Anforderungen
Qualitäts-Schneidsysteme für höchste Anforderungen Made in Germany Tomphecke 51 41169 Moenchengladbach Germany Phone 0049 (0) 21 61-99 42-0 Fax 0049 (0) 21 61-99 42 14 info@sato.de www.sato.de 09/2012
Galileo Desktop Benutzerhandbuch Version 1.02
Galileo Desktop Benutzerhandbuch Version 1.02 Galileo Deutschland GmbH. All rights reserved. Dieses Dokument enthält Informationen, an denen Galileo International Rechte besitzt. Dieses Dokument darf nur
BT-0078E Ordyl AM 100 Ausgabe: Oktober 2011. Wässrig-alkalischer Fototrockenresist für Laserdirektbelichtung LDI/ Standard UV-Belichtung
Arbeitsanleitung Ordyl AM 100 Serie Wässrig-alkalischer Fototrockenresist für Laserdirektbelichtung LDI/ Standard UV-Belichtung Die Serie Ordyl AM 100 ist ein wässrig-alkalischer Fototrockenresist und
Virtual PBX and SMS-Server
Virtual PBX and SMS-Server Software solutions for more mobility and comfort * The software is delivered by e-mail and does not include the boxes 1 2007 com.sat GmbH Kommunikationssysteme Schwetzinger Str.
Low Profile Antenna. GLONASS 1890 LP/S/FAKRA 3.0 Erz-Nr. / Ord. code 602 434-001. Datenblatt / Datasheet GLONASS / GPS / CELLULAR
Low Profile Antenna GLONASS / GPS / CELLULAR GLONASS 18 LP/S/FAKRA 3. 62 434-1 Kombinationsantenne für Satellitenempfang (GLONASS und GPS) für Telematiklösungen (z.b. Flottenmanagement, Fahrzeugortung
Preisliste für The Unscrambler X
Preisliste für The Unscrambler X english version Alle Preise verstehen sich netto zuzüglich gesetzlicher Mehrwertsteuer (19%). Irrtümer, Änderungen und Fehler sind vorbehalten. The Unscrambler wird mit
LEISTUNGSERKLÄRUNG. Nr. 003BauPVo2013-07-14
LEISTUNGSERKLÄRUNG Nr. 003BauPVo2013-07-14 1. Eindeutiger Kenncode des Produkttyps: Falztreibriegelschloss 2. Typen-, Chargen- oder Seriennummer oder ein anderes Kennzeichen zur Identifikation des Bauprodukts