ABB i-bus EIB EIB Power Supply Units
Product Range Overview EIB Power Supplies ABB STOTZ-KONTAKT GmbH, 2002 - SK 029 F 02 E
Product Range Overview EIB Power Supplies! EIB Power Supply, 320 ma SV/S 30.320.5! EIB Power Supply, 640 ma SV/S 30.640.5 ABB STOTZ-KONTAKT GmbH, 2002 - SK 030 F 02 E! Uninterruptible EIB Power Supply, 640 ma
ABB STOTZ-KONTAKT GmbH, 2002 - SK 031 F 02 E EIB Power Supply, 320 ma SV/S 30.320.5! Outputs EIB: 1 with choke! Rated current: 320 ma! Width: 4 modules! Reset: by disconnecting of the the bus connection terminal! Connections EIB: bus connection terminal Mains: screw terminals! LEDs ON: output voltage o.k.
ABB STOTZ-KONTAKT GmbH, 2002 - SK 032 F 02 E EIB Power Supply, 640 ma SV/S 30.640.5! Outputs EIB: 1 with choke 30 V DC: 1! Rated current: 640 ma (sum of EIB and 30 V)! Width: 6 modules! Reset: push button and LED! Connections EIB: bus connection terminal 30 V: connection terminal Mains: screw terminals! LEDs ON: output voltage o.k.
EIB Power Supply, 640 ma L N PE SV/S 30.640.5 SV/S 30.640.5 30 V DC 1 2 LK/S 2.1 VB/S 2.2 5 Linie 1 Linie 1 Connection diagrm for the supply of one line and an additional main line ABB STOTZ-KONTAKT GmbH, 2002 - SK 033 F 02 E 3 4 VB/S 4.4 DR/S 2.2 Hauptlinie Hauptlinie " Connection terminal # Line coupler $ Connector, 4-pole % Choke & Connector, 2-pole
ABB STOTZ-KONTAKT GmbH, 2002 - SK 034 F 02 E Uninterruptible EIB Power Supply, 640 ma! Outputs EIB: 1 with choke Buffering: battery and temperature sensor Fault inform.: via potential free change-over contact! Rated current: 640 ma! Width: 8 modules! Reset: push button and LED! Connections EIB: Connection terminal Mains: Screw terminals Fault inform.: Screw terminals Battery: Screw terminals
ABB STOTZ-KONTAKT GmbH, 2002 - SK 035 F 02 E Uninterruptible EIB Power Supply, 640 ma 230 V OK - + OK 150 ma - Code/ 650 ma ϑ - 12 V + - + 7 8 9 10 ϑ - + C > 5 Ah - + Battery Back-Up! Up to two 12 V DC sealed lead acid batteries connectable in parallel! Temperature controlled charging of the battery via temperature sensor! Max. charging current: 150 / 650 ma! Max. charging time: approx. 4 times back-up time! Back-up time: up to 16 hours (depends on battery capacity and output current)! Protection of the battery! LED: Battery o.k.! The temperature sensor must always be connected!
ABB STOTZ-KONTAKT GmbH, 2002 - SK 036 F 02 E Uninterruptible EIB Power Supply, 640 ma L N 4 5 6 Fault Information µ µ! Fault information via a potential free change-over contact for:! mains failure! battery fault! overvoltage! overload/ short circuit! Rated voltage: 230 V AC 12 / 24 V DC! Rated current: 6 A AC / 4 A DC! Output does not distinguish between faults! Fault information is stored in the case of an overvoltage or overload! Confirmation via reset push button
ABB STOTZ-KONTAKT GmbH, 2002 - SK 037 F 02 E Uninterruptible EIB Power Supply, 640 ma L a 1 2 3 N ABB i-bus EIB 230 V OK Code/ 150 ma ϑ - 650 ma - - + OK 12 V + - + 7 8 9 10 230 V AC 50/60 Hz - + 12 V 30 V -5 C...45 C 30 V DC 640 ma 5 6 Status Display via LEDs ON 4 µ I>Imax RESET 30 V DC A µ! ON (green) Output voltage OK (EIB is in normal operation)! I>I max (red) Blinking: overvoltage, autom. reset, fault information stored on: overload, fault information stored! 230 V AC OK (green) Mains supply OK! Akku OK (green) Battery OK
ABB STOTZ-KONTAKT GmbH, 2002 - SK 038 F 02 E Battery Module, 12 V DC AM/S 12.1! Sealed lead acid battery! Rated voltage: 12 V DC! Rated capacity: 1 Ah! For buffering the EIB voltage for min. 10 minutes in combination with the! Integrated temperature sensor for temperature controlled charging of the battery! Integrated fuse (self healing)
ABB STOTZ-KONTAKT GmbH, 2002 - SK 039 F 02 E Battery Module, 12 V DC 12 V ϑ Code/ + - 150 ma - 650 ma - + SU/S RESET 30 V DC a 7 8 9 10 1 2 3 4 ϑ - 150 ma ABB i-bus EIB AM/S 12.1 Code + + - 12 V 30.640.1 AM/S 12.1 Connection diagram AM/S 12.1 AM/S 12.1! Recommended installation: DIN rail mounted directly above the! Only to be used in combination with the!! Temperature sensor must always be connected!! For horizontal mounting in distribution boards only!! Not to be connected in parallel with other batteries or other battery modules
Sealed Lead Acid Batteries and Accessories Sealed Lead Acid Batteries Product Name Type Battery capacity Back-up time Battery 12 V, 7 Ah SAK7 7 Ah up to 2,5 h (1 battery) up to 5 h (2 batteries parallel) Battery 12 V, 12 Ah SAK12 12 Ah up to 5,5 h (1 battery) up to 11 h (2 batteries parallel) Battery 12 V, 17 Ah SAK17 17 Ah up to 8 h (1 battery) up to 16 h (2 batteries parallel) Charging time appr. 10 h (1 battery) appr. 20 h (2 batteries parallel) appr. 22 h (1 battery) appr. 44 h (2 batteries parallel) appr. 32 h (1 battery) appr. 64 h (2 batteries parallel) ABB STOTZ-KONTAKT GmbH, 2002 - SK 040 F 02 E
Sealed Lead Acid Batteries and Accessories! ABB STOTZ-KONTAKT GmbH, 2002 - SK 041 F 02 E!!! Cable Set Basic KS/K 4.1 4 core cable including temperature sensor and fuse Length: 2 m Cable Set Extension KS/K 2.1 2 core cable including fuse Length: 2 m