ANLEITUNG FÜR EINBAU, BEDIENUNG UND WARTUNG KESSEL - Badablauf Classic Auslauf senkrecht DN 70 Best.Nr. 40 270.20 Produktvorteile Drehbares und um 50 mm stufenlos höhenverstellbares Aufsatzstück Optimale Rohrreinigung durch Herausnehmen des Geruchverschlusses Geruchverschluss selbstreinigend Niedrige Bauhöhe mit fixierter Lippendichtung für den sicheren Einbau Dehnfuge zwischen Endbelag und Aufsatzstück legen. Änderungsstand: 10/2012 Sachnummer: 084-113
Produktbeschreibung 107 135 min. 10 max.60 DN 70 Minimale Einbauhöhe 145 mm Aussparungsmaße 180 x 180 mm Aufsatzstück drehbar, stufenlos, hö hen - verstellbar um 50 mm. Auf Bodenniveau anpaßbar, minimale Einbauhöhe durch Absägen Herausnehmbarer Geruchverschluss Grundkörper Ausbaufähig und kombinierbar mit Ergänzungsbauteilen (siehe Rückseite)
Einbau- und Montagetips Aufsatzstück drehbar, stufenlos höhenverstellbar ohne Absägen Bei vertieftem Einbau Verlängerungsstück Best. Nr. 27146 zwischen Grundkörper und Aufsatzstück anbringen. Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite. Reinigung Flexibler Niveauausgleich zwischen Aufsatzstück und Grundkörper Nach Abnehmen des Rostes und Her aus - neh men des Geruchverschlusses durch Kip pen ist eine optimale Rohrreinigung möglich. Minimale Einbauhöhe durch Absägen
Einbauvorschlag Dauerelast. Fuge Abb. zeigt Best.-Nr. 40250.20 + 27198 KESSEL-Bodenablauf Glockengeruchverschluss Aufsatzstück mit Schlitzrost Zwischenstück mit Pressdichtungsflansch Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite.
Systemzubehör Schemadarstellung des kompletten Baukastensystems. Grundkörper aus ABS 40270 DN 70, Auslauf senkrecht mit Geruchverschluss Geruchverschluss aus PP 47200 50 mm Sperrwasserhöhe Verlängerungsstück aus ABS 27145 mit Lippendichtung Klebeflansch aus ABS 43401 mit Gegenflansch Flanschbreite 100 mm Abdichtungsbahn 43710 aus PVC 500 x 500 mm Abdichtungsbahn 43730 aus EPDM 500 x 500 mm Zwischenstück aus ABS 27199 mit Klebeflansch und Gegenflansch Flanschbreite 100 mm Zwischenstück aus PP 27198 mit Pressdichtungsflansch aus Edelstahl, Flanschbreite 63 mm Haltering aus HDPE 27167 zur Sickerwasserableitung Aufsatzstück aus ABS 27193 mit Schlitzrost, 150 x 150 mm aus ABS Aufsatzstück aus ABS 27191 mit Schlitzrost, 150 x 150 mm aus Edelstahl, verschraubt Aufsatzstück aus PA 27192 mit Klemmrand und Schlitzrost aus PVC Ø 120 mm Lippendichtung 27148 für Zwischenstücke Dünnbettaufsatz 47901 100 x 100 mm Dünnbettaufsatz 47902 150 x 150 mm
Rückstauverschlüsse Hebeanlagen Abläufe / Duschrinnen Abscheider -Fettabscheider -Öl-/Benzin-/Koaleszenzabscheider -Stärkeabscheider -Sinkstoffabscheider Kleinkläranlagen Schächte Regenwassernutzung
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE KESSEL - floor drain Classic vertical outlet DN 70 Best.Nr. 40 270.20 Produktvorteile Attachment piece can be turned and continuously heightadjusted by up to 50 mm Optimum pipe cleaning by removal of odour trap Self-cleaning odour trap Low installation height With fixed lip seal for safe installation Place expansion joint between end cover and attachment piece. Edition: 10/2012 Number: 084-113EN
Product description 107 135 min. 10 max.60 DN 70 Minimum installation height 145 mm Recess dimensions 180 x 180 mm Attachment piece can be turned and continuously height-adjusted by up to 50 mm. Can be adapted to floor level, minimum installation height through sawing to size Removable odour trap Drain body Can be extended and combined with supplementary components (see revers)
Einbau- und Montagetips Attachment piece can be turned and continuously heightadjusted Flexible level adjustment between attachment piece and drain body Minimum installation height by sawing the attachment piece as required During initial operation, make sure that the odour trap is completely filled with water. Please check the water level at regular intervals to avoid odour pollution! Cleaning Nach Abnehmen des Rostes und Her aus - neh men des Geruchverschlusses durch Kip pen ist eine optimale Rohrreinigung möglich.
Assembly proposal Polyethylene moisture barrier Slope Expansion joint Slope 1.5 cm Tiles 4 cm Screed Thermal/Sound insulation Scree (3 cm) Concrete floor Polyethylene moisture membrane Dimensions in cm Illustration shows 40250.20 + 27198 KESSEL-floor drain Cover with grill Odour trap and counterflange Connection flange See next page for system accessories for additional installation possibilities.
System accessories Schematic representation of the whole modular system. Drain body made of PP 42701 DN 50, with side inlet DN 40 Lip seal 27148 for adapters Extension made of ABS 27146 with lip seal Adhesive flange made of ABS 43401 with counterflange Flange width 100 mm PVC sealing sheet 43710 500 x 500 mm EPDM sealing sheet 43730 500 x 500 mm ABS adapter 27199 with adhesive flange and counterflange, flange width 100 mm PP adapter 27198 with pressure sealing flange made of stainless steel, flange width 63 mm Supporting ring made of HDPE 27167 for discharging seepage water Attachment piece made of ABS 27193 with slotted cover, 150 x 150 mm ABS Attachment piece made of ABS 27191 with slotted cover, 150 x 150 mm made of stainless steel, screwed in place Attachment piece made of PA 27192 with clamping edge and white slotted cover Ø 120 mm made of plastic Variofix shallow bed attachment 47901 ABS, with slotted cover, 100 x 100 mm Variofix shallow bed attachment 47902 ABS, with slotted cover, 150 x 150 mm The KESSEL floor/bathroom and roof drains bodies and attachment pieces made of plastic can be combined with those made of stainless steel size 1. Please send your inquiry to our Sales department.
Backwater protection Lifting Stations and pumps Drains and shower channels Separators -Grease Separators -Oil-/Fuel-/Coalescence Separators -Starch Separators -SedimentSeparators Septic Systems Inspection Chambers Rainwater Management Systems