Mitteldruck-Zellenradschleuse Typ CFM Medium pressure rotary feeder type CFM
|
|
- Charlotte Adler
- vor 8 Jahren
- Abrufe
Transkript
1 » Engineering your success «Zeppelin Systems GmbH 8845 Friedrichshafen Tel.: Fax: Einsatzgebiete CFM-Zellenradschleusen werden vorwiegend für den dosierten Austrag von Granulaten und Pulvern aus Silos sowie als Aufgabeorgan in pneumatischen Flugförderanlagen bis 1,5 bar (g) Druckdifferenz eingesetzt. Applications The CFM-type rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. They also serve as feeding devices in pneumatic dilute phase conveying systems with a differential pressure up to 1.5 bar (g). Produktinformation Product information 1
2 8845 Friedrichshafen Tel.: Fax: Konstruktionsmerkmale Optimierte Ein- und Auslaufgeometrie, dadurch produktschonendes Durchschleusen bei optimierten Schleusenfüllgraden Im Gehäuse integrierter Leckgasstutzen Temperaturbereich von -1 bis +6 C für Produkte und -1 bis +4 C für Umgebung in der Standardausführung. Andere Bereiche nach Kundenwunsch Minimale Leckgasmenge durch optimale Spaltgestaltung und 12-Kammern-Zellenräder Befestigungsmöglichkeiten direkt am Gehäuse für Zubehör wie Förderschuhe, Absperrklappen etc. Außenliegende lebensdauergeschmierte Wälzlager. Ausfallöffnung zwischen Wellendichtringen und Lager Sperrgasbeaufschlagung für Pulverschleusen, verhindert Eindringen von Produkt in den Dichtungsbereich Visuelle Anzeige der Zellenraddrehrichtung und -drehzahl Kettenschutz komplett geschlossen in Kunststoff EG-Konformitätserklärung nach ATEX-Richtlinie 94 / 9 / EG Leistungsbereich Durchsatz bis 62 m³/h bei 1 % Füllgrad und unter Berücksichtigung der ATEX-Richtlinie Baugrößen (Zellenraddurchmesser in mm) 2 / 25 / 32 / 4 / 5 / 63 / 75 Differenzdruck bis 1,5 bar (g) Ausführungen Flansch-Anschlussmaße gemäß DIN PN 1, ANSI 15 Andere Werkstoffe, Schnellreinigungsausführung und Sonderzellenräder auf Anfrage Druckstoßfestigkeit und Flammendurchschlagsicherheit auf Anfrage Für hohe Temperaturen, Kühlung oder Beheizung möglich Design characteristics Optimized inlet and outlet cross sections for gentle product feeding combined with optimized filling rate Leakage gas nozzle integrated into housing Product temperature range from -1 to +6 C and ambient temperatures from -1 to +4 C for standard design; other temperature ranges according to customer s requirements Minimum gas leakage volume due to optimized gap design and 12-chamber rotor Fasteners for accessories such as feeding chutes and shut off valves directly at housing External ball bearings with lifetime lubrication; outlet opening between shaft sealing rings and bearing Purge gas device prevents penetration of material into the sealing area for powder applications Visual control of rotor speed and sense of rotation Completely closed plastic chain guard EC declaration of conformity according to ATEX regulation 94 / 9 / EC Capacity Throughput up to 62 m³/h at 1% filling rate according to of ATEX regulations Sizes (rotor diameter in mm) 2 / 25 / 32 / 4 / 5 / 63 / 75 Differential pressure up to 1.5 bar (g) Designs Flange connecting dimensions according to DIN PN 1, ANSI 15 Other materials, quick cleaning and special rotor design upon request Pressure surge resistant and flame-proof upon request Cooling or heating of housing possible for high temperatures 2
3 8845 Friedrichshafen Tel.: Fax: Technische Daten Technical data Typ Type Zellenradvolumen [Ltr./U] Rotor volume [LTR/rev] Abmessungen in mm sofern nicht anders angegeben Dimensions in mm unless otherwise specified H DN D d1 d2 t L m n A a1 a2 B b1 b2 Gewicht* [kg] Weight* [kg] CFM (8 ) 342, ,3 (1-1/2 ) CFM (1 ) 46, ,3 (2 ) CFM (12 ) ,1 (2-1/2 ) CFM (14 ) ,9 (3 ) CFM (16 ) ,9 (3 ) CFM (2 ) ,3 (4 ) CFM (24 ) ,7 (5 ) * Gewicht ohne Motor (Typ AC/SS/AC) * Weight without motor (type AC/SS/AC) 3
4 8845 Friedrichshafen Tel.: Fax: Technische Daten Technical data Schleusenleckluft [Nm³/h] Rotary valve air leakage [Nm³/h] CFM 75/28 CFM 63/173 CFM 5/94 CFM 4/49 CFM 32/26 CFM 25/14 CFM 2/7,5 1 1,5 p in bar (g) p in bar (g) Vm³/h Durchsatzleistung Throughput 16 p barg,7 1,5 CFM 4/49 Vm³/h Durchsatzleistung Throughput 7 p barg,7 1, CFM 75/ CFM 32/26 CFM 25/14 CFM 2/ CFM 63/173 CFM 5/ n1/min n1/min 4
5 8845 Friedrichshafen Tel.: Fax: Bestellbeispiel Mit der Typenbezeichnung können Sie Ihr individuelles Zeppelin- Produkt bestellen. Geben Sie bitte die entsprechenden Kürzel für Typenbezeichnung, Ausführung, Nennweiten, Volumina etc. an. How to order To order your individual Zeppelin product, simply indicate the desired type designation (abbreviated form), model, size, volume etc. Typenbezeichnung Type designation CFM AC / SS / AC G CFM = Mitteldruck-Zellenradschleuse bis 1,5 bar (g) Differenzdruck Medium pressure rotary feeder with a differential pressure up to 1.5 bar (g) Zellenradvolumen in Ltr. Rotor volume in LTR Zellenraddurchmesser in mm Rotor diameter in mm Gehäuse- und Seitendeckelwerkstoff Housing and side cover material AC = Aluminium, hartcoatiert Aluminium, hard coated SS = Stahl, rostfrei Stainless steel GG = Grauguss Gray cast iron GD = Grauguss, vernickelt Gray cast iron, nickel plated GV = Grauguss, verchromt Gray cast iron, chrome plated Zellenradwerkstoff Rotor material SS = Stahl, rostfrei Stainless steel Zellenradausführung Rotor design G = Granulat, seitlich offen, nicht angeschrägt Pellets, laterally open, not beveled GS = wie G, jedoch mit Schnellreinigung Same as G but with quick cleaning P = Pulver, seitlich offen, allseitig angeschrägt Powder, laterally open, beveled on all sides PS = wie P, jedoch mit Schnellreinigung Same as P but with quick cleaning 5
Mitteldruck-Zellenradschleuse CFM Medium pressure rotary feeder CFM
8845 Friedrichshafen, Germany el.: +49 7541 22-2, Fax: +49 7541 22-1491 Produktinformation Product information Einsatzgebiete Die Zellenradschleuse CFM wird vorwiegend für den dosierten Austrag von Granulaten
MehrHochdruck-Zellenradschleuse CFH High pressure rotary feeder CFH
8845 Friedrichshafen, Germany el.: +49 7541 22-2, Fax: +49 7541 22-1491 Produktinformation Product information Einsatzgebiete Die Zellenradschleuse CFH wird vorwiegend für den dosierten Austrag von Granulaten
MehrProduktinformation Product information
Produktinformation Product information Einsatzgebiete Eintragsystem in pneumatische Förderanlagen. Ein- und Ausschleussystem in Prozessanlagen bis zu einem Differenzdruck von 4 bar (g). Geeignet für pulver-
MehrAustragschleuse A1/AG11, Bauserie II. series II. Produktinformation Product information. Applications.
Austragschleuse A1/AG11, Bauserie II Discharge rotary feeder A1/AG11, series II Produktinformation Product information Einsatzgebiete Die wird zur Produkteinspeisung und -ausspeisung in pneumatische Saug-
MehrDurchblasschleuse D, Bauserie ii Blowthrough rotary feeder D,
Durchblasschleuse D, Bauserie ii Blowthrough rotary feeder D, series II Produktinformation Product information Einsatzgebiete Die Durchblasschleuse D, Bauserie II wird zur Produkteinspeisung in pneumatische
MehrMitteldruck-Zellenradschleuse Typ MDS Medium Pressure Rotary Feeder Type MDS
Produkt-Information Mitteldruck-Zellenradschleuse Typ MDS Medium Pressure Rotary Feeder Type MDS Einsatzgebiete MDS-Zellenradschleusen werden vorwiegend für den dosierten Austrag von Granulaten und Pulvern
MehrAustragschleuse Typ A Discharge Valve type A
Produkt-Information Austragschleuse Typ A Discharge Valve type A Produkt-Information Austragschleuse Typ A Discharge Valve type A Einsatzgebiete Zur Produktein- und -ausspeisung in pneumatische Saug- und
MehrHochdruck-Zellenradschleuse Typ HDS High Pressure Rotary Feeder Type HDS
Produkt-Information Hochdruck-Zellenradschleuse Typ HDS High Pressure Rotary Feeder Type HDS Einsatzgebiete HDS-Zellenradschleusen werden vorwiegend für den dosierten Austrag von Granulaten und Pulvern
MehrFließbett Fluidizing bed
» Engineering your success «Zeppelin Systems GmbH Einsatzgebiete Pneumatisches Auflockerungssystem zur Austragung schwer fließfähiger aber gut fluidisierbarer Schüttgüter (mehlartig und pulverförmig),
MehrHochdruckschleuse AGSY/APSY High Pressure Rotary Feeder AGSY/APSY
Produkt-Information Hochdruckschleuse AGSY/APSY High Pressure Rotary Feeder AGSY/APSY Produkt-Information Hochdruckschleuse AGSY/APSY High Pressure Rotary Feeder AGSY/APSY Einsatzgebiete Eintragsystem
MehrTwo-way hose-type diverter valve ZWS Three-way hose-type diverter valve DWS
» Engineering your success «Zeppelin Systems GmbH Einsatzgebiete Verteil- oder Sammelelement in pneumatischen Förderanlagen (bis 4 bar g) für pulverförmige und granuläre Produkte der unterschiedlichsten
MehrSaugfördergerät SFG Vacuum hopper loader SFG
Produktinformation Product information Einsatzgebiete Universelles Gerät zur automatischen Beschickung von Extrudern, Ver arbeitungsmaschinen, Behältern und Lagersilos mit Pulvern und Granulaten mit Pulveranteil.
MehrFlieSSbett FB Fluidizing bed FB
FlieSSbett FB Produktinformation Product information Einsatzgebiete Pneumatisches Auflockerungssystem zur Austragung schwer fließfähiger aber gut fluidisierbarer Schüttgüter (mehlartig und pulverförmig),
MehrVIBRATIONSTRICHTER/-BODEN VT/VB VIBRATORY CONE/BOTTOM VT/VB
VIBRATIONSTRICHTER/-BODEN VT/VB VIBRATORY CONE/BOTTOM VT/VB Produktinformation Product information Einsatzgebiete Vibrationstrichter/-böden VT/VB dienen zur Aktivierung des Produktflusses schwerfließender
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrDOSIER- UND FÖRDERSCHNECKE DS DOSING AND CONVEYING SCREW DS
DOSIER- UND FÖRDERSCHNECKE DS DOSING AND CONVEYING SCREW DS Produktinformation Product information Einsatzgebiete Die Dosier- und Förderschnecke DS wird zum Dosieren und Fördern von trockenen, pulver-
MehrAustrags- und Dosierungsmodul
Austrags- und Dosierungsmodul KOKEISL KA/KAD Discharge and dosage module KOKEISL KA/KAD Produktinformation Product information Einsatzgebiete Zuverlässiges Austragen und präzises Dosieren wird mit dem
MehrIMM. Eintauchpumpen mit offenem Laufrad Immersion pumps with open impeller. Leistungsdaten / Performance. n 2850 1/min
Werkstoffe / Materials Teile-Benennung / Description Pumpengehäuse Pump casing Laufrad Impeller Rotorwelle Shaft Deckel Cover Spritzring Deflector IMM 40-50 IMM 63-100 Aluminium / Stahl / GG Aluminium
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrUNIVERSAL- UNIVERSAL. Produktinformation Product information. Einsatzgebiete. Applications
UNIVERSAL- Saugfördergerät SFG UNIVERSAL Vacuum hopper loader Produktinformation Product information Einsatzgebiete Universelles Gerät zur automatischen Beschickung von Extrudern, Ver arbeitungsmaschinen,
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
Handbetätigt allseitig mit Innengewinde mit T- oder L- Bohrung hand actuated all ports female thread with T- or L- configuration Bauart Nennweite DN 10 50 Betriebsdruck Handhebel Gehäusewerkstoff Kugelwerkstoff
MehrRohrschieber Slide Valve
Rohrschieber Slide Valve Type: RS DN: 50 300 (2 12 ) PN: 6 160 (Class 125 900) Temp: 50 80 C Hydrostatischer Prüfdruck / Hydrostatic test pressure: 160 280 bar Abschluss Sitz / End cover seat: 100 160
MehrKugelhähne Ball-valves
163 Ball-valves Features u u unterschiedliche Baureihen für flexible Anwendungen Mini- auch mit Steckanschluss u u Various lines for flexible applications Mini ball valves also with plug connection 164
MehrEUSAS TYPE. siehe Tabelle auf der Seite 31 / see at table on page 31. siehe Tabelle auf der Seite 31 / see at table on page 31
EUSAS TYPE Teile Nr. Bezeichnung part No. designation Baugröße IEC / size Type WATT / type Stator B3 1.1 Stator B3 Stator B5, B14 1.2 Stator B5, B14 Rotor + Welle 2 Rotor + shaft Klemmkasten komplett 3
MehrHOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV
HOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV EIGENSCHAFTEN Nennweite: DN - 1 mm Baulänge: DIN, ASME, ISO Betriebsdrücke: 1 - bar Auf/Zu-Ventile Regelventile (elektrisch/ elektro-pneumatisch)
MehrCompressed air - dewpoint 10K under ambient temperature - ISO8573-1, Kl. 3 Durchflussrichtung Flow direction EIN: von 1-2 AUS: von 2 3
3/2 Wegeventil mit PIEZO-Pilotventil Baureihe P20 3/2 way valve with Piezo-pilot valve Series P20 P20 381RF-* NW 2 Eigenerwärmungsfrei Ein Produkt für alle Ex-Bereiche Kompatibel zu Microcontrollern Kompatibel
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrTechnical Documentation and Operation Manual. Kühlgehäuse der Pyrometerserie Metis Cooling jacket for pyrometer series Metis (KG10-00)
Beschreibung und Bedienungsanleitung Technical Documentation and Operation Manual Kühlgehäuse der Pyrometerserie Metis Cooling jacket for pyrometer series Metis (KG10-00) Inhalt S./P. 1. Beschreibung /
MehrSpecial design for bulk solids, Hygienic Design acc. to EHEDG-Guidelines
Special design for bulk solids, Hygienic Design acc. to EHEDG-Guidelines Operation purpose: The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids,
MehrHoneywell AG Hardhofweg. D-74821 Mosbach MU1H-1220GE23 R1001
BA 95 Einbau-Anleitung Installation Instructions Einbau Installation Einbaubeispiel Installation example Ablaufleitung vorsehen Install discharge pipework Durchflussrichtung beachten! Consider direction
MehrCOUPLING TECHNOLOGY. Water Pneumatic Hydraulic Electrical TYPE COUPLING TECHNOLOGY
Water Pneumatic Hydraulic Electrical Accessories 2 Temperature Range - Temperaturbereich - C +180 C (+ F +356 F) Nitrile (V) - C +0 C (-4 F +2 F) Nitrile (N) - C +0 C (-4 F +2 F) EPDM (E) 0 C +270 C (+23
MehrTECHNISCHE DATEN TYP D TECHNICAL DATA
TECHNISCHE DATEN TYP D Hydraulik Differentialzylinder ohne Endlagendämpfung TECHNICAL DATA TYP D Hydraulic differential cylinder without end position damping Hydraulik Differentialzylinder ohne Endlagendämpfung,
MehrConnecting bend 90 connecting bend parts that serve as a connection between the hydraulic separator and the compact manifold.
Technical data sheet MultiFlow Expert Components of the MultiFlow Expert - hydraulic separator - connecting bends - multiple compact manifolds [D] Manufacturer certification Description MultiFlow Expert
MehrControl shut-off butterfly valves DN 50 DN 400 PN
Features Applications include HEVAC and drinking water systems, sanitary and industrial plants for control or shut-off of water and steam -10...+110 C Leakage rate: tight sealing Control and shut-off butterfly
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrTECHNISCHE DATEN TYP PLU. Einfachwirkende auf Druck arbeitender Hydraulikzylinder, TECHNICAL DATA
TECHNISCHE DATEN TYP PLU Einfachwirkend auf Druck arbeitender Hydraulikzylinder TECHNICAL DATA TYP PLU Single-acting, pressure-operated hydraulic cylinder Einfachwirkende auf Druck arbeitender Hydraulikzylinder,
MehrSpecification. FACE TO FACE LENGTH Acc. to EN R20.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10/PN16); andere auf Anfrage. BAULÄNGE Nach EN
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrSpecification. OPERATION Rotation of the handle through 90, with snap-in positions.
Technische Daten BAUFORM 1-teiliges Zentriergehäuse zum Einklemmen zwischen zwei Flansche nach EN 92-1 Typ 11 Form B (PN/PN1). Mit DVGW- Zulassung für Trinkwasser. BETÄTIGUNG 90 -Drehung des Handhebels,
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrPSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve
PSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve Typ (Type) GSAL DN 40 500 PN 10 250 mit Flanschen oder Anschweißenden DN 40 500 PN 10 250 with flanges or welding ends - Ausführung
MehrType P, S & RSP - Ball bearing, bellows system cartridge Series 9000
Type P, S & RSP - Ball bearing, bellows system cartridge Recommended medium Heat transfer oil, Air, Steam, Water, Non-toxic industrial gases, Lyes (on request) Available sizes 1/4" - 4" Max. speed ISO
MehrTECHNISCHE DATEN TYP HET TECHNICAL DATA. Single-acting hydraulic telescopic cylinder
TECHNISCHE DATEN TYP HET Hydraulisch einfachwirkender Teleskopzylinder TECHNICAL DATA TYP HET Single-acting hydraulic telescopic cylinder, bis zu 5 Stufen, Nenndruck max. 200 bar. Sonderausführung nach
MehrAbsperrklappen Typ BD und BW Butterfly valves type BD and BW PN 2, , DN , Class , Size 2" "
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BD und BW Butterfly valves type BD and BW PN,..., DN 0... 00, Class... 0, Size "... 0" Absperrklappen Typ BD und BW Butterfly valves
MehrFlansch-Hebel-Sicherheitsventile
Flansch-Hebel-Sicherheitsventile Flanged Safety Valves with Lever and Weight Inhalt Contents Type Seite/Page Normal-Sicherheitsventil Safety Relief Valve mit Hebel und Gewicht bis PN 40 with Lever and
MehrKühlgehäuse für Pyrometerserie Metis Cooling jacket for pyrometer series Metis KG10-00
Beschreibung und Bedienungsanleitung Technical Documentation and Operation Manual Kühlgehäuse für Pyrometerserie Metis Cooling jacket for pyrometer series Metis KG10-00 Inhalt S./P. 1. Beschreibung / Description...
MehrRenova B-Air BRENNZELLE/ KACHELOFENEINSATZ. fireplace insert. Glasform: pane design: Renova B-Air 1. Renova B-Air mit Frontblende RB3.
BRENNZELLE/ KACHELOFENEINSATZ fireplace insert Renova B-Air Renova B-Air mit Frontblende RB3.0 Glasform: pane design: Renova B-Air 1 Technische Zeichnungen Renova B-Air mit Mauerhalszarge engineering drawing
MehrInduktive Näherungsschalter inductive proximity switches
Zylindrisch DC cylindric DC Zylindrisch DC Vollmetall cylindric DC full metal Hochtemperatur high temperature Schweißfest weld resistant Druckfest pressure resistant Analog analog Namur namur AC AC Kunststoff
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV7 L_200 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Druckbetrieb Pressure operation Typen Types 2BV7
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrType PG, SG & RSG - Graphite Bearings Maintenance free for High Temperatures, Bellows System Cartridge Series 9000G
Type PG, SG & RSG - Graphite Bearings Maintenance free for High Temperatures, Bellows System Cartridge Series 9000G Recommended medium Heat transfer oil, Steam, Water, Air, Nontoxic gases, vacuum Available
MehrFSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type
FSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type FSKH mit Abschließvorrichtung und Endschalter FSKH with locking device and position switch (F)SKH SAE (F)SKH SAE Größen: 13 bis 50 Gehäuse:
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BM und BT Butterfly valves type BM and BT PN 10..., DN... 00 Class 75...150, Size 1 ½"... 64" Absperrklappen Typ BM und Typ BT Butterfly
MehrDurchflussmesser Verschraubungen Fittings. Durchfluss Schau-Glas-Indicator
Durchflussmesser Verschraubungen Fittings Durchfluss Schau-Glas-Indicator Durchfluss Sichtelement Schauglas Anwendung: Flüssigkeiten, Gase,Trinkwasser Material Edelstahl Grauguss Gross-Mess-Regeltechnik
MehrDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV2 L_200 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Druckbetrieb Pressure operation Typen Types 2BV2
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / 282
1 fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10
MehrHF13-Programm HF13 Programme
S. 221 HF13 plugs S. 222 HF13-Adapter HF13 adapters S. 223 HF13-Buchsen s 2 HF13 - Programm Die HF-Steckverbindungen der Serie 13/4 werden in Anlagen der Nachrichtentechnik (DIN 47 283 und DIN 47 284),
MehrÄl-Luft-KÅhler Oil-Air-Cooler
The better connection 63 Äl-Luft-KÅhler Abmessungen / Bezeichnungen Bez. / Description T1 T2 T3 T4 T5 (T5K) T6 T7 T8 T9 T10 T11 Leistung / Power KW 1-5 3-10 8-15 10-20 15-25 20-35 25-40 35-75 60-120 85-180
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrVGX/2 VGX. Kreiselpumpen
WASSERVERSORGUNG > Druckerhöhung VGX/2 VGX Kreiselpumpen Einsatzgebiete Wasseraufbereitung Wasserversorgung Kühlanlagen Apparatebau Druckerhöhung Ausführung Blockpumpe mit oberflächengekühltem Motor, verlängerter
Mehr3/2 way poppet valve with Piezo-pilot valve, overlapping, Normally closed (NC) Allgemeines
3/2 Wegeventil mit PIEZO-Pilotventil Baureihe P8 385 3/2 way valve with Piezo-pilot valve Series P8 385 P8 385RF-* NW 1,6 12 2 10 Eigenerwärmungsfrei Ein Produkt für alle Ex-Bereiche Kompatibel zu Microcontrollern
MehrSpecification. DESIGN Swing check valves for return fl ow prevention in piping systems to be mounted directly between fl anges acc. to DIN.
Technische Daten BAUFORM Rückschlagklappen zur Rückfl ussverhinderung in Rohrleitungssystemen für den Einbau zwischen DIN Flanschen. ANSCHLUß Flansch DN32 DN500 bemessen für Flansch nach PN16 BETRIEBSDRUCK
MehrI-Energieversorgung I-Power Supply
F Seite 1 page 1 1) Pneumatisch a. Stellantriebe mit Membrane finden ihren Einsatz da, wo kleine Stellkräfte ausreichen. Der pneumatische Stellantrieb ist direkt in Kompaktbauweise mit dem Stellventil
MehrX-ROW G X-ROW 60 G X-ROW 80 G X-ROW 100 G X-ROW 120 G X-ROW 170 G X-ROW 230 G X-ROW 300 G X-ROW 370 G X-ROW 460 G. Kompressoren. 50 Hz Auswahldiagramm
Kompressoren X-OW G X-OW 60 G X-OW 80 G X-OW 100 G X-OW 120 G X-OW 170 G X-OW 230 G X-OW 300 G X-OW 370 G X-OW 460 G Öl umlaufgeschmierte Drehschieber-Kompressoren mit Wasserkühlung für die Verdichtung
MehrProduktinformation Product information
Rotary Sifter RS Produktinformation Product information Einsatzgebiete Die wird in der Nahrungsmittel-, chemischen, kunststoffverarbeitenden und pharmazeutischen Industrie, sowie Bäckereien, Backbetrieben
MehrMessanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P
Messanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P Beispiele Examples Behälter/vessel Nummer Art der Messung offen geschl. Messumformertyp Medium number kind of measurement
MehrTECHNICAL DATA. Double-acting pneumatic telescopic cylinder
TECHNISCHE DATEN TYP PDT Pneumatisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP PDT Double-acting pneumatic telescopic cylinder Pneumatisch doppeltwirkende Teleskopzylinder mit Endlagendämpfung,
MehrPNEUMATISCHE PUMPEN PNEUMATIC PUMPS
BVBA POMAC-LUB-SERVICES SPRL Korte Bruggestraat 28 B-8970 Poperinge Tel. 057/33 48 36 Fax 057/33 61 27 info@pomac.be internet: www.pomac.be EINLEITUNGSSCHMIERSYSTEM MIT VOLUMETRISCHEN DOSIERVENTILEN FÜR
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrSeitenkanalpumpen. Einsatzgebiete Wasserversorgung Apparatebau Bewässerung Landwirtschaft Schifffahrt
WASSERVERSORGUNG > Wasserentnahme SK Seitenkanalpumpen Einsatzgebiete Wasserversorgung Apparatebau Bewässerung Landwirtschaft Schifffahrt Ausführung Selbstansaugende Seitenkanalpumpen, geeignet für reine,
MehrDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV7 L_200 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV7
MehrWiegen / Balance 6.01. Inhaltsübersicht Contents Seite / Page
6 Wiegen / Balance Inhaltsübersicht Contents Seite / Page l 6.1 Taschenwaage l 6.2 Präzisionswaagen l 6.3 Plattformwaagen l 6.4 Analysewaagen l 6.5 Tischwaagen l 6.6 Bodenwaagen l 6.7 Feuchtebestimmer
MehrBronze BR - B 584 Spring: Stainless steel / AISI 316 Valve disc: Stainless steel / AISI 316 L
Technische Daten BAUFORM -teilige Körperkonstruktion, Zwischenflanschbauweise mit breiter Dichtfl äche nach DIN. ANSCHLUß DN 5 bis DN EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten
MehrDeceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H
Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and
MehrTechnical details subject to change without notice / Tolerances acc. to DIN/ANSI standards, other dimensions approximate
Check Valve B4w / wafer type Check Valve B4w available sizes DN 50 up to DN 250, PN 10, wafer type execution disc replaceable, with reinforced steel inlet for assembling between flanges acc. to DIN EN
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrFahrtwindlüfter. Klimakammer Institute for Applied Automotive Research (IDIADA) Größe 1400, m³/h, 1400 Pa, 75 kw. -Vehicle cooling fan
- für Klimakammer Institute for Applied Automotive Research (IDIADA) Größe 1400, 120.000 m³/h, 1400 Pa, 75 kw. -Vehicle cooling fan for climatic chamber Institute for Applied Automotive Research (IDIADA)
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
Mehr/ Technische Änderungen und drucktechnische Irrtümer vorbehalten.
EZ-0225-V10 Air Bearing Spindle High accurancy air bearing spindle with direct drive. Equipped with an water-cooled synchronous motor (frequency at nominal speed 400 Hz), Power output 1880 W. Rotary encoder
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrStationäre StaubsaugeranlAGE DCS
Stationäre StaubsaugeranlAGE DCS Stationary dust collecting SYSTEM DCS Produktinformation Product information Einsatzgebiete Stationäre Staubsaugeranlagen werden für eine schnelle, saubere, sichere und
MehrTechnische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. OHG Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008
MehrDruckstoSSfester Jet-Entlüftungsfilter DEB/DS Shock pressure resistant jet venting filter DEB/DS
DruckstoSSfester Jet-Entlüftungsfilter DEB/DS Shock pressure resistant jet venting filter DEB/DS Produktinformation Product information Einsatzgebiete Vollautomatisch arbeitender Entlüftungs-filter zur
MehrSPECK. Zubehör für Vakuumpumpen - accessoires for vacuum pumps
SPECK Zubehör für Vakuumpumpen accessoires for vacuum pumps Produktionsprogramm/ production program Seitenkanalpumpen side channel pumps Kleinkreiselpumpen small centrifugal pumps Wärmeträgerölpumpen thermal
MehrDistanzmontageteilen. Distance rolls
Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical
MehrWestenberg Wind Tunnels
MiniAir20 Hand measurement device for flow, humidity and temperature The hand measurement device MiniAir20 is used for the acquisition of temperature, relative humidity, revolution and flow velocity such
Mehr10GA 10GA. a = 0,2 L. FPM Dichtungen Seite 191 FPM seals Page 191. Einsatzbereich see page 3 Temperatur -30 C bis 100 C Gleitgeschwindigkeit
10GA Dichtungen - Führungselemente L H Einsatzbereich see page 3 Temperatur -30 C bis 100 C Gleitgeschwindigkeit Medien siehe Seite 11 10GA Werkstoffe siehe Seiten 4-9 Hülse 1 Stahl Abstreifer 2 NBR 90
MehrDichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton. Cone Sealing Couplings with 24 -Cone and O-ring Viton
Dichtkegel-Verschraubungen mit 24 -Kegel und O-Ring Viton Cone Sealing Couplings with 24 -Cone and O-ring Viton 9 DICHTKEEL-VERSCHRAUBUNEN MIT 24 -KEEL UND O-RIN - VITON - DIN EN ISO 8434-1 CONE SEALIN
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrZubehör Accessories Accessoires
Seite Page Page 14/2 DA 14/4 Allgemeine Merkmale Drehantrieb General parameters Rotary drive unit Caractéristiques générales Servomoteur rotatif + 16 Zubehör Accessories Accessoires 14/0 Drehantrieb Rotary
MehrSchaltfunktion function. piping. Technische Änderungen vorbehalten / modifications reserved Stand / stand: 07/2012
fremdgesteuert externally controlled Schaltfunktion function Elektrischer Anschluss M12x1 electrical connector M12x1 Die Ventile arbeiten als Druckwaage und werden im Bypass eingesetzt. Der Mediumsdruck
Mehr