For advanced engineering.

Transkript

1 For advanced engineering. Telescopic slides Standard program.

2 Page 4-9 Partial extension slide. Travel approx. 70-% of slide length. Page - 27 Full extension and over-extension slide. Travel 0 % of slide length. Page Linear slides and sliding systems Linear slide. Travel within the slide length. Perfect running characteristics. Schock ball bearing slides convince through their smooth and silent movement, particularly with high loads. The roll-forming technology used by Schock guarantees maximum precision in the production of slide profiles. High durability. The ball provides the system s advantage: with each stroke, it pushes any deposit off the track. In addition, lateral impacts are absorbed elastically. This guarantees a long, maintenancefree service life. 2

3 Schock telescopic slides for all lines of business. The indicated load rates are maximum values for a pair of vertically mounted slides with uniformly distributed load and optimal drawer and cabinet fixing. They are based on internal tests with the indicated number of cycles and must be proven under the intended effective conditions of use. Unfavourable conditions may lead to a reduction of load capacity. horizontal installation of slides will reduce the load capacity by approx %. Vertically-mounted Schock telescopic slides are extremely resistant to distortion. With this alignment the optimum load capacity can be achieved. pplication examples: Home, kitchen and bathroom furniture Shopfitting equipment and displays Office and edp furniture Warehouse equipment and operating facilities Safes Medical equipment Laboratory equipment 19 -racks Tool carrier units TM and vending machines (merchandising, ticketing, tool dispensing, ) Industrial applications In principle, Schock telescopic slides can also be installed horizontally. However, in this case the load rates are lower than for verticallymounted slides Inner rail all cage 3 Intermediate rail (in full extension and over-extension slides) 4 Outer rail 5 Functional component (e.g. self-closing device with integrated damping system) 3

4 Partial extension Series 017 Load capacity up to 15 kg uszugsweg 35 uszugsweg ø 5, ø 5,3 8 8 Length Travel uszugsweg ±3 mm Length 35 ø ø5, ,0 +0,5 Installation,0 +0,5 space,0 +0,5 44 M4 M4 rticle No. Length Travel Load capacity per pair (kg) rawer depth Weight mm mm M4 at cycles from to mm mm kg / pair 44 M , , , , ,28 all cages: plastic alls: hardened carbon steel Working temperature + to up to max. + pplicable for different drawer depths. 4

5 8 8 Partial extension Series 0 Load capacity up to 25 kg uszugsweg uszugsweg Travel ±3 mm Length Length ,2 27,2 27,2,0 +0,5 Installation space,0 +0,5,0 +0,5 M4 (2x) 44 rticle No. Length Travel Load capacity per pair (kg) rawer depth Weight mm mm at cycles from to mm mm mm kg / pair M4 (2x) , , , , M4 (2x) 44 all cages: plastic alls: hardened carbon steel Working temperature + to up to max. + pplicable for different drawer depths. 5

6 Partial extension Series uszugsweg Load capacity up to 70 kg uszugsweg 26 Travel uszugsweg ±3 mm Length 26 Length 37,5 37,5 37,5 13,0 +0,5 +0,5 13,0 +0,5 13,0 +0,5 44 M4 (2x) 4,7 4,7 rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) rawer depth Weight M4 (2x) mm mm at cycles 44 at cycles from to mm mm mm mm kg / pair 4, , ,78 M4 (2x) , ,14 4,7 all cages: plastic alls: hardened carbon steel pplicable for different drawer depths. Working temperature + to up to max. + pplicable for horizontal installation. 6

7 Partial extension Series 012 Load capacity up to 50 kg Retaining pins uszugsweg± 3 mm +3,5 mm LE Ø 6 mm ( mm tief) Ø 6 mm Ø 6 mm Ø 6 mm ( mm tief) ( mm tief) ( mm tief) +3,5 mm uszugsweg± 3 mm ø 6 mm Ø 6 mm ( mm deep) ( mm tief) 20 Length +3,5 LEmmmm uszugsweg± Travel ±3 mm 3 LE 4,7 37,5 5 37,5 5 37, ,5 37, ,7 ø6 8,5 ø6 ø6 ø6 13,0 13,0 +0,5 +0,5 8,5 8,5 8,5 ø6 13,0 +0,5 13,0 +0,5 8,513,0 +0, Length 4,7 13,0 +0,5 rticle No. Length Travel Load capacity per pair 12 (kg) rawer depth LE Weight mm mm at cycles 28 from to mm mm mm kg / pair , , ,08 28 all cages: plastic alls: hardened carbon steel Retaining pins for installation and removal without tools. Working temperature + to up to max. + pplicable for different drawer depths. 7

8 Partial extension Series 0 Load capacity up to 65 kg etachable inner rail Hold-out detent Positive stop in closed position 1,6 uszugsweg -2 mm 15,9 12,7 12,7 5,3 x 4,6 uszugsweg 1,6 1,6-2 mm Travel uszugsweg ±3 mm Length -2 mm 15,9 15,9 12,7 12,7 12,7 12,7 5,3 x 4,6 5,3 x 4,6 9,5 +0,2 +0,5 +0,5 9,5 +0,2 Installation space 12,7 12,7 5,3 x 4,6 Klinke Latch for für detachable trennbare Innenschiene rail 111,1 E F G Length Maximale Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch 111,1 9,5 +0,2 +0,5 9,5 +0,2 +0,5 E F mm / inches Klinke für G trennbare 111,1 mm at cycles Innenschiene mm mm mm mm mm mm mm kg / pair 12,7 12,7 5,3 x 4,6 Maximale E Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch F Klinke für G trennbare Innenschiene 12,7 12,7 5,3 x 4,6 Maximale Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch rticle No. Length Travel Load capacity per pair (kg) E F G Weight 0.063Z 5 / ,9 254,0-149,2 260,3 273,0 0, Z 3 / ,3 279,4-174,6 285,7 298,4 0, Z 356 / ,7 4,8-200,0 311,1 3,8 0, Z 406 / ,6-250,8 361,9 374,6 0, Z 457 / ,2 342,9 406,4 212,7 1,6 412,7 425,4 0, Z 508 / ,6 393,7 457,2 238,1 352,4 463,6 476,3 1, Z 533 / ,3 419,1 482,6 250,8 377,8 488,9 501,6 1, Z 559 / ,0 419,1 508,0 263,5 403,2 514,3 527,0 1, Z 6 / ,4 444,5 558,8 288,9 454, ,8 1, Z 660 / ,8 495,3 609,6 314,3 504,8 615,9 628,6 1,34 Slide rails: zinc electroplated and blue passivated steel all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + y operating a latch, the inner rail can be detached and mounted separately onto the moveable module. 8

9 Partial extension Series 061 Load capacity up to 60 kg Smooth movement and high lateral stability uszugsweg 35 LK 5,3 uszugsweg LK 35 5,3 uszugsweg Travel ±3 mm Length LK 35 5,3 17,4 17,4 17,4 17,4 22,0 22,0 8,0 22,0 8,0 8,0 8,0 14,0 +0,5 +0,5 14,0 +0,5 14,0 +0,5 M4 M rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) rawer depth LK Weight M4 mm mm at cycles at cycles from to mm mm 8mm 8 kg / pair , ,48 M , all cages: plastic alls: hardened carbon steel pplicable for different drawer depths. Working temperature + to up to max. + pplicable for horizontal installation. 9

10 Over-extension Series 042 Load capacity up to 12 kg Travel 0% + uszugsweg 35 ø 5,3 8 8 uszugsweg 35 ø 5, ,0 Travel uszugsweg ±3 mm Length + Length 35 ø ø5, ,0 17,0 20,0 20,0 +0,5 +0,5 44 M4 20,0 +0,5 20,0 +0,5 rticle No. Length Travel Load capacity per pair (kg) rawer depth Weight mm mm at cycles from to mm mm kg / pair M ,36 44 M4 all cages: plastic alls: hardened carbon steel Working temperature + to up to max. + pplicable for different drawer depths.

11 Over-extension Series 040 Load capacity up to kg Travel 0% + uszugsweg uszugsweg ,2 Travel uszugsweg ±3 mm Length + Length ,2 27,2 20,0 +0,5 +0,5 M4 (2x) 44 ø 20,0 +0,5 20,0 +0,5 M4 (2x) 44 ø rticle No. Length Travel Load capacity per pair (kg) rawer depth Weight mm mm at cycles from to mm mm mm kg / pair M4 (2x) 44 ø ,85 all cages: plastic alls: hardened carbon steel Working temperature + to up to max. + pplicable for different drawer depths. 11

12 Over-extension Series 040 Load capacity up to kg Travel 0% + Hold-in detent uszugsweg ±3 uszugsweg ±3 27,2 27,2 27,2 uszugsweg Travel ±3 mm ±3 Length Length + 20,0 20,0 +0,5 +0,5 Installation space M4 (2x) ø M4 (2x) M4 (2x) ø M4 (2x) ø ø rticle 20,0 No. +0,5 20,0 Length +0,5 Travel Load capacity per pair (kg) Weight mm M4 mm (2x) ø at cycles mm M4 (2x) ø mm mm kg / pair , , , , , , , ,50 all cages: plastic alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. 12

13 Over-extension Series 044 Load capacity up to 60 kg Travel 0% + etachable inner rail Hold-out detent Positive stop in closed position uszugsweg ± 3 mm -2 mm E uszugsweg ± 3 mm -2 mm E uszugsweg Travel ±3 ± mm 3 mm Length -2 mm E 15,9 12,7 12,7 5,3 x 4,6 15,9 12,7 12,7 5,3 x 4,6 15,9 12,7 12,7 5,3 x 4,6 +0,7 +0,7 19,0 19,0 +0,4 +0,4 +0,7 +0,7 19,0 +0,4 19,0 +0,4 15,9 12,7 5,3 x 4,6 123,8 15,9 12,7 5,3 x 4,6 123,8 Maximale Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch mm / inches mm at cycles mm mm mm 111,1 mm mm mm kg / pair 15,9 12,7 5,3 x 4,6 123,8 111,1 F E Klinke für trennbare Innenschiene Length Latch for detachable rail Klinke für trennbare Innenschiene Klinke für trennbare Innenschiene + Maximale Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch 111,1 F E rticle No. Length Travel Load capacity per pair (kg) E F Weight F E Z 5 / ,3 273,0-1,12 Maximale Schraubkopfabmessungen: ø 8 mm x 2,6 mm hoch Z 3 / ,0 285,7 298,4-1, Z 356 / ,4 311,1 3,8-1, Z 406 / ,2 361,9 374,6 250,8 1, Z 457 / ,7-400,0 412,7 425,4 1,6 1, Z 508 / , ,9 463,6 476,3 352,4 1, Z 533 / ,8 390,5 476,2 488,9 501,6 377,8 1, Z 559 / ,5 415,9 501,6 514,3 527,0 403,2 2, Z 6 / ,9 466,7 552, ,8 454,0 2, Z 660 / , ,2 615,9 628,6 504,8 2,46 Slide rails: zinc electroplated and blue passivated steel all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + y operating a latch, the inner rail can be detached and mounted separately onto the moveable module. 13

14 Full extension Series 0 Load capacity up to 40 kg etachable inner rail Hold-in detent uszugsweg ±3-2 mm uszugsweg ±3-2 mm 35 E 9 12,6 12,7 35 E 9 12,6 12,7 9 12,7 9 12,7 45, uszugsweg Travel ±3 mm ±3 Length -2 mm Length 35 E 9 12,6 12,7 9 12, ,5 12,7 +0,5 +0,5 4,4 4,4 x 9,3 Klinke für trennbare Innenschiene Latch for detachable rail 6,3 6,3 4,6 x 9,5 4,6 4,6 4,6 x 9,5 12,7 +0,5 12,7 +0,5 4,4 6,3 6,3 Klinke für trennbare 4,4 x 9,3 Innenschiene 4,6 4,6 rticle No. Length Travel Load capacity per pair (kg) E Weight mm mm at cycles mm mm mm mm mm kg / pair 4,6 x 9,5 4,6 x 9,5 4,4 6,3 6, Z 0 5 4,4 x 9,3 Klinke für trennbare Innenschiene - 4, ,6-0, Z , Z , Z , Z , Z , Z ,76 4,6 x 9,5 4,6 x 9,5 Slide rails: bright chromated steel all cages: steel and plastic alls: hardened carbon steel Working temperature + to up to max. + y operating a latch, the inner rail can be detached and mounted separately onto the moveable module. The hold-in detent fixes the slide in closed position. 14

15 Over-extension Series 036 Load capacity up to 70 kg Travel 0% + Hold-in detent uszugsweg ±3 8,0/90 5,4 uszugsweg ±3 8,0/90 5,4 uszugsweg Travel ±3 mm ±3 Length Length 8,0/90 / 5,4 + / 90 52,6 52,6 52,6 52,6 13,0 +0,5 13,0 +0,5 13,0 +0,5 13,0 +0,5 rticle No. Length Travel Load capacity per pair (kg) Weight mm mm at cycles mm mm mm kg / pair , , , , , , , , , ,28 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. 15

16 Over-extension Series 036 Load capacity up to 50 kg Travel 0% + Retaining pins ø 6 mm ( mm tief) Hold-in detent uszugsweg ±3 uszugsweg ±3 ø 6 mm ( mm tief) ø 6 mm ø 6 mm ( mm ( tief) mm tief) 52,6 ø 6 mm ( mm deep) ø 6 mm ( mm tief) Travel uszugsweg ±3 mm ±3 Length + Length 52, ,6 52,6 52, ø ø ,5 +0,5 +0,5 50 LE 14,5 +0,5 ø6 7 ø6 7 7 ø6 50 LE ø6 rticle 14,5 No. 14,5 +0,5 Length Travel Load capacity per pair (kg) LE Weight 7 mm mm at cycles mm mm kg / pair 14,5 +0, ,35 50 LE , , , , ,67 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. Retaining pins for installation and removal without tools.

17 Over-extension Series 036 Load capacity up to 50 kg Travel 0% + Retaining pins Self-closing device uto atch 25 mm uszugsweg ±3 52,6 uszugsweg ±3 LS LS LS uszugsweg Travel ±3 mm ±3 LS + Length 52,6 52,6 52,6 ø 6 ø ø ,5 14,5 +0,5 +0,5 ø ,5 14,5 +0,5 +0,5 +0,5 * ø 50 ø / 90 * from length 700 mm * * ø 50 ø ø 9,5 9,5 / / * ab 700 mm * rticle No. Length Travel Load capacity per pair (kg) LS Weight 50 * ab 700 mm ø 9,5 / 90 mm mm at cycles mm mm mm mm mm kg / pair ø * ab 700 mm , , , , , , , , ,26 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The pull-in force of the self-closing device can be changed by reallocating the spring. Retaining pins for installation and removal without tools. 17

18 Full extension Series 036 Load capacity up to 55 kg amping system Soft ontrol 2 50 mm uszugsweg ±3 LS uszugsweg ±3 LS Travel uszugsweg ±3 mm ±3 LS Length mind mind mind. min mind ,0 +0,5 +0,5 ø 5,4 5,4 ø ø 8,0 8,0/90 / ø / 90 13,0 +0,5 13,0 +0,5 13,0 +0,5 ø 5,4 ø ø 8,0 / 90 ø 9,5 / 90 rticle No. Length Travel Load capacity per pair (kg) LS Weight ø 5,4 ø mm mm at ø 8,0 / 90 cycles mm mm mm ø 9,5 / 90 mm mm kg / pair , , , , , , , , ,93 all cages: pre-zinced steel alls: hardened carbon steel The 50 mm self-closing device with exterior pneumatic damper ensures an automatic quiet closing action. Working temperature + to up to max

19 Over-extension Series 037 Load capacity up to 0 kg Travel 0% + Hold-in detent uszugsweg ±3 8/90 uszugsweg ±3 8/90 Travel uszugsweg ±3 mm ±3 Length 8/90 + Length 57,5 57,5 57,5 57,5 +0,5,0 +0,5,0,0 +0,5 +0,5 rticle No. Length Travel Load capacity per pair (kg) Weight mm mm at cycles mm mm mm kg / pair , , , , , , , , , ,28 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. 19

20 Over-extension Series 037 Load capacity up to 70 kg Travel 0% + amping system Soft ontrol 50 mm uszugsweg ±3 uszugsweg ±3 LS 8/90 LS 8/90 Travel uszugsweg ±3 mm ±3 LS 8/90 + Length 57,5 57,5 57,5 57,5 +0,5,0 +0,5,0 +0,5 +0,5 rticle No. Length Travel Load capacity per pair (kg) LS Weight mm mm at cycles mm mm mm mm kg / pair , , , ,83 all cages: pre-zinced steel alls: hardened carbon steel The 50 mm self-closing device with integrated pneumatic damper ensures an automatic quiet closing action. Working temperature + to up to max

21 Over-extension Series 038 Load capacity up to 0 kg Travel 0% + Hold-in detent uszugsweg ±3 8/90 uszugsweg ±3 8/90 Travel uszugsweg ±3 mm ±3 Length 8/90 + Length 57,4 57,4 57,4 57,4 +0,5 +0,5 +0,5 +0,5 rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) Weight mm mm at cycles at cycles mm mm mm kg / pair , , , , , , , , , ,36 all cages: pre-zinced steel alls: hardened carbon steel The hold-in detent fixes the slide in closed position. Working temperature + to up to max. + pplicable for horizontal installation. 21

22 Over-extension Series 038 Load capacity up to 70 kg Travel 0% + Retaining pins Hold-in detent uszugsweg ±3 LE uszugsweg ±3 LE LE ø 6 mm ( ø 6 tief) ø 6 ( mm tief) ø 6 mmø 6 mm ø 6 mm ( mm ( tief) mm ( tief) mm tief) ( mm deep) uszugsweg Travel ±3 mm ±3 Length LE + Length 57,4 57,4 57,4 57,4 57,4 57, ø6 ø6 7 ø6 ø6 7 ø ø6 ø6 +0,5 7 19,0 7 +0,5 19,0 +0,5 19,0 +0,5 19,0 +0,5 19,0 +0,5 50 rticle No. Length Travel Load capacity per pair (kg) LE Weight 50 mm mm at cycles mm mm kg / pair , , , , , , , , , ,43 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. Retaining pins for installation and removal without tools. 22

23 Over-extension Series 038 Load capacity up to 75 kg Travel 0% + Support bracket Self-closing device uto atch 25 mm uszugsweg ±3 uszugsweg ±3 Travel uszugsweg ±3 mm ±3 + Length 57,4 57,4 57,4 57,4 57,4 12,5 12,5 12,5 12,5 12,5 7,5 8,1 4,3 4,3 3,5 8,1 3,5 7,5 7,5 7,5 +0,5 19,0 +0,5 19,0 +0,5 19,0 +0,5 19,0 +0,5 7, ,5 70 LE LE 70 7,5 7,5 70 LE LE 70 4,3 Length 8,1 3,5 4,3 8,1 3, ,5 70 LE LE 70 7,5 rticle No. Length 8 8 Travel Load capacity per pair (kg) LE Weight 7,5 70 LE LE 70 7,5 mm mm at cycles mm mm kg / pair 7, , , , , , , , ,48 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The pull-in force of the self-closing device can be changed by reallocating the spring. Support bracket, e. g. for installation of drawers close to the bottom with wooden dowels Ø 8 mm. 23

24 Over-extension Series 038 Load capacity up to 75 kg Travel 0% + Support bracket amping system Soft ontrol 2 50 mm uszugsweg ±3 uszugsweg ±3 77 mind mind mind. 48 min. mind ,5 2 12,5 12, ,5 2 Travel uszugsweg ±3 mm ±3 + Length 8,1 4,3 3,5 8,1 3,5 7,5 7,5 7,5 7,5 7,5 19,0 +0,5 +0,5 19,0 +0,5 19,0 +0,5 19,0 +0,5 7, ,5 67 LE LE 67 4,3 8,1 3,5 LE LE 67 Length 7,5 7, ,5 67 LE LE 67 7,5 4,3 mm 8,1 mm 3,5 at cycles mm mm kg / pair rticle No. Length Travel Load capacity per pair (kg) LE Weight , ,51 7,5 67 LE LE , , , , , ,39 7,5 all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. +60 The 50 mm self-closing device with exterior pneumatic damper ensures an automatic quiet closing action. Support bracket, e. g. for installation of drawers close to the bottom with wooden dowels Ø 8 mm. 24

25 uszugsweg ±3 Over-extension Series 039 Load capacity up to 0 kg Travel 0% + Hold-in detent 8/90 uszugsweg ±3 8/90 Travel uszugsweg ±3 mm ±3 Length 8/90 + Length 57,4 57,4 57,4 57,4 19,0 +0,5 +0,5 19,0 +0,5 19,0 +0,5 rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) Weight mm mm at cycles at cycles mm mm mm kg / pair , , , , , , , , , ,37 all cages: pre-zinced steel alls: hardened carbon steel The hold-in detent fixes the slide in closed position. Working temperature + to up to max. + pplicable for horizontal installation. 25

26 uszugsweg W ±3 Full extension Series uszugsweg W -3 ±3 mm mm Load capacity up to 200 kg Hold-in detent uszugsweg W ±3-3 mm uszugsweg W ±3-3 mm ø x 9,5 / 90 ø x 9,5 / 90 ø x 9,5 / 90 ø x 9,5 / 90 uszugsweg Travel ±3 W mm±3 70,0 uszugsweg Length W -3-3mm ±3-3 mm ø x 9,5 / 90 ø x 9,5 / 90 70,0 70,0 70,0 18,0 +0,5 +0,5 18,0 18,0 +0,5 +0,5 ø x 9,5 / 90 ø x 9,5 / 90 ø x 9,5 / 90 Length Fixing with M5 countersunk screws (screw head height 2,5 mm) or Euro screws (countersunk head height efestigung 1,5 mm) mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) mm mm ø x 9,5 / 90 efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) at.000 cycles at cycles at oder cycles Euro-Schrauben mm (Senkkopf mm Höhe mm 1,5 mm) mm kg / pair rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) Weight , ø x 9,5 / 90 efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) ,45 ø x 9,5 / , , ,63 efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) , , ,55 Slide rails: zinc electroplated and blue passivated steel all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max. + The hold-in detent fixes the slide in closed position. pplicable for horizontal installation. 26

27 Full extension Series 070 Load capacity up to 200 kg Support bracket Hold-in detent uszugsweg W ±3-3 mm ø x 9,5 / 90 uszugsweg W ±3 uszugsweg -3 W mm±3-3 mm uszugsweg Travel ±3 W W mm ±3 ±3 Length mm ø x 9,5 / 90 ø x 9,5 / 90 Length ø ø x x 9,5 / / 90 70,0 70, ,0 70,0 70, LS LS/2 6 LE LE ,0 +0,5 +0,5 40 ø 4,7 6 6 LS 40 ø 20,0 +0,5 20,0 20,0 +0,5 +0,5 LS/2 Fixing with M5 countersunk LE screws (screw LS head height 2,5 mm) or LEEuro screws (countersunk head height 1,5 mm) efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) LS/ oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) LE LE LS LS ø 4,7 40 LS/2 40 ø mm mm LE LE at.000 ø 4,7 cycles LE at LE0.000 cycles mm mm mm mm mm kg / pair ø efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) efestigung mit M5-Senkkopfschrauben (Kopfhöhe 2,5 mm) ø ø 4,7 4, oder Euro-Schrauben (Senkkopf Höhe 1,5 mm) ø ø rticle No. Length Travel Load capacity per pair (kg) LS LE Weight , ,98 efestigung mit mit M5-Senkkopfschrauben (Kopfhöhe 2,5 2,5 mm) oder Euro-Schrauben (Senkkopf Höhe 1,5 1,5 mm) , , , , , Slide rails: zinc electroplated and blue passivated steel all cages: pre-zinced steel alls: hardened carbon steel The hold-in detent fixes the slide in closed position. Working temperature + to up to max. + 27

28 Sliding systems. Full extension slide for vertical storage cabinets in home, office and bedroom furniture. Full extension pantry slide for wire basket solutions in the kitchen. Full extension keyboard slide with hold-out detent. Partial extension keyboard slide with mounting bracket. Flap door system with parallel guidance. 28

29 Linear slide Series 0 Load capacity up to 60 kg etent in front end position 7/90 7/90 Length 7/90 +0,5 +0,5 11,5 11,5 +0,2 +0,2 arrier-plate with multifunctional hole pattern 5,4 +0,5 11,5 +0,2 rticle No. Length Travel Load capacity per pair (kg) Load capacity per pair (kg) Weight mm mm at cycles at cycles mm kg / pair +0,5 +0,5 11,5 +0,2 11,5 +0, H , H , H , H , H , H ,33 5,4 5,4 Slide rails: zinc-iron coated and black chromated steel all cages: pre-zinced steel alls: hardened carbon steel pplicable for horizontal installation. Working temperature + to up to max. + 29

30 Keyboard slide Series 061 Load capacity up to 25 kg Mounting bracket to screw under the table top Support brackets Hold-out detent 7,0 uszugsweg LK 7,0 uszugsweg LK 7,0 uszugsweg Travel ±3 mm LK 17,4 17, , ,4 25,2 25,2 25,2 25,2 25,2 15,3 15,3 15,3 15,3 15,3 LE Length LE rticle No. Length Travel Load capacity per pair (kg) LE LK Weight LE mm mm at cycles mm mm mm kg / pair , ,69 all cages: plastic alls: hardened carbon steel Partial extension keyboard slide with mounting bracket. Working temperature + to up to max. +

31 Keyboard slide Series 043 Load capacity up to 55 kg Support brackets Hold-out detent Positive stop in closed position 6,2 6,2 uszugsweg ±3 uszugsweg ± LK LK 6,2 uszugsweg Travel ±3 mm ± LK 40,5 40,5 40, , , ,5 82 Length 82 Keyboard Position Tablarschiene rail in im closed eingeschobenen position Zustand Position Tablarschiene im eingeschobenen Zustand rticle No. Length Travel Load capacity per pair (kg) LK Weight mm mm at cycles mm mm mm mm mm kg / pair 82 Position Tablarschiene im eingeschobenen Zustand ,02 all cages: plastic alls: hardened carbon steel Full extension keyboard slide with hold-out detent. Working temperature + to up to max. + 31

32 Full extension pantry slide Serie 036 Serie Serie Serie 036 8,5 8,5 8,5 8,5 8,5 Load capacity up to 120 kg ottom and top guided Smooth running with high stability 50 mm self-closing device with damper in both bottom and top slide unit Packed per set - ready to install 8,5 8,5 8,5 23 8,5 8,5 14,5 8,5 Ø 8 Serie 036 Soft ontrol (obere Führung) Serie 059 mit Einzugsdämpfung (untere Führung) 76 uszugsweg ±3 mm Serie 036 Soft ontrol (obere Führung) Serie 059 mit Serie Einzugsdämpfung 036 Soft ontrol (untere (obere Führung) Führung) Top slide unit 76 Serie 036 Soft ontrol (obere Führung) Front edge of cabinet Length 8,5 8,5 Ø 8 Ø 8 Ø 8 Ø 8 ø 8 Ø 88 Ø 8 8 Ø 8 Ø 8 uszugsweg ±3 mm Interior cabinet height 3 Interior cabinet height Ø 8 Ø ottom slide unit Serie 036 Soft ontrol (obere Führung) 76 5 Travel uszugsweg ±3 ±3 mm Ø ø ø Ø 6,6 24 Ø 96 Ø Ø 96 Ø Ø 6,6 Ø 6,6 6,6 5,0 40 Length Serie 059 Serie Serie Serie Ø Ø 6,6 Ø 6,6 6,6 M6 M6 (4x) 7,1 5,0 Ø Ø Ø 5,0 Front edge of cabinet rticle No Length 0 Travel Load capacity (kg) Weight mm mm at cycles mm mm mm mm kg / set 5,0 Ø 6,6 Ø Ø , M6 (4x) 7,1 5,0 Ø 6,6 all cages: pre-zinced steel alls: hardened carbon steel M6 (4x) 5,0 For 7,1 wire basket solutions in the kitchen. Working temperature + to up to max. +60

33 89 8,5 0 Full extension pantry slide ,5 Serie 036 Serie Load capacity up to 120 kg 17 ottom and top guided Mounting brackets with front adjustment 50 mm self-closing device with damper in both bottom and top slide unit Packed per set - ready to install 8,5 8,5 Ø 8 8,5 8, ,5 23 8,5 14,5 8, ,5 8,5 8,5 Interior cabinet height Interior cabinet height 8, , Ø 8 Ø 8 Ø 8 Ø 8 Ø 8 ø 8 Ø 8 1 Ø 8 Ø 8 1 Ø 8 1Ø 8 Ø 8 Ø 8 Ø Top slide unit ottom slide unit Mounting brackets Serie 036 Soft ontrol (obere Führung) Serie 059 mit Einzugsdämpfung (untere Führung) 76 Serie 036 Soft ontrol (obere uszugsweg Führung) ±3 mm 77 efestigungswinkel für Holzzarge (untere Führung) Serie 059 Serie mit Einzugsdämpfung 036 Soft ontrol (untere (obere Führung) Führung) uszugsweg ±3 mm 77 efestigungswinkel für Holzzarge efestigungswinkel (untere Führung) für Holzzarge (untere Führung) Serie 059 mit Einzugsdämpfung (untere Führung) Serie 036 Soft ontrol (obere Führung) Length ø Ø 6,6 Ø 6,6 Ø ø Travel uszugsweg ±3 mm efestigungswinkel für Holzzarge (untere Führung) Fixing screw M6 screw to adjust M6-Schraube for mounting inclination for Fixierschraube für zur Neigungsverstellung efestigungswinkel bracket für front Frontjustierung adjustment 81 Fixing screw Fixierschraube for mounting für efestigungswinkel bracket 5 5 5,0 7,1 Front edge of cabinet 5,0 Ø 5,0 Ø Length Ø 6,6 40 Ø Ø 6, , M6-Schraube 1717 Fixierschraube für zur Neigungsverstellung Fixierschraube für 7,1 efestigungswinkel für Frontjustierung efestigungswinkel for front adjustment 0 0 für Frontjustierung Ø Ø 6, rticle No. Length Travel Load capacity (kg) Weight mm mm at cycles mm mm mm mm kg / set Fixierschraube für efestigungswinkel M6-Schraube zur Neigungsverstellung Fixierschraube für 7,1 für Frontjustierung efestigungswinkel 5,0 5, für Frontjustierung für Frontjustierung , , ,25 all cages: pre-zinced steel alls: hardened carbon steel For home, office and bedroom furniture. für Frontjustierung Working temperature + to up to max

34 6 Flap door system For vertical and horizontal installation oor height 90-2 cm Rack+pinion parallel guidance (option) etent in front end position 9/90 x 7 7,5/90 x 4,2 5,4 9/90 x 7 7,5/90 x 4,2 5,4 5,4 55 5, /90 x 7 7,5/90 5,4 x 4,2 55 7/90 5, Length 9/90 x 7 9/90 x 23 7/90 7/ /90 8 7,5/90 x 4,2 x 4,2 5,4 mind min ,5 6 6 M4 für Scharnier (4x) 6 11,5 11,5 11,5 M4 für M4 für Scharnier Scharnier (4x) (4x) 8 M4 für Scharnier (4x) M4 für Scharnier M4 for (4x) hinge (4x) M4 für Verbindungsstange (12x) M4 für Scharnier (4x) mm 29 rticle 29 M4 29 für M4 für M4 für Quantity Mounting 6 instruction 6 Verbindungsstange (12x) stange (12x) stange (12x) 11,5 Verbindungs- Verbindungs ,5 7/90 40 M4 für for Verbindungsstange rod (12x) connection (12x) 6 11,5 7/ /90 Linear slide Series 0 7/ /90 7/90 mm mm mm kg / set rticle No. Length Travel Weight , , , ,46 11, ,53 Parallel guidance (option) rticle No. Length No. Ordering example with 3 linear slides Rack 2 pieces shorten to cabinet depth M4 für Pinion wheel 2 pieces 1 each per rack Scharnier (4x) lock with screws M4 x 25 mm 3 pieces 1 each per linear slide 29 M4 für ush Verbindungsstange (12x) 11,5linear slide 49 3 pieces 1 each per onnection rod 1 piece shorten to cabinet height or width 40 7/90 7/ ,5 M4 für Scharnier (4x) Slide rails: zinc-iron coated and black chromated steel all cages: pre-zinced steel alls: hardened carbon steel Working temperature + to up to max M4 für Verbindungsstange (12x) M4 für Verbindungsstange (12x) The Schock flap door system can be used for inlayed or overlayed doors, depending on the hinge type. 6 11,5 6 11,5 34

35 Rack 2 Pinion wheel 3 lock 4 ush 5 onnection rod 6 Linear slide 7 Hinge (added by customer) The Schock flap door system can be used for inlayed or overlayed doors, depending on the hinge type

36 ertified quality for your products. Short-term delivery worldwide Schock Metal merica, Inc. - Subject to technical amendment Schock Metal merica, Inc. 12 Scholastic Way hesapeake, V 233 Toll Free: Phone: Fax: info@schockmetal.com Internet: