MX13. Kugelhähne Split body Typ KHS Ball Valves Split body Type KHS PN ; ANSI class DN ; NPS 2"...
|
|
- Erika Böhm
- vor 6 Jahren
- Abrufe
Transkript
1 MX1 Kugelhähne Split body Typ KS Ball Valves Split body Type KS PN ; ANSI class DN ; NPS "... 0"
2 Technische Merkmale Technical characteristics KS/1-0/II PN ; ANSI class DN ; NPS "... 0" Senkrecht geteilte Bauweise Konstruiert nach API Spec. D Schwimmend gelagerte selbstzentrierende Sitzringsysteme mit vorgespannten Federelementen Double block and bleed Keine elektrostatische Aufladung Zapfengelagertes Kugelküken Leitungsdruckabhängige Dichtkraft Sekundärabdichtung Entwässerungs- und Entlüftungsanschlüsse Feuersicherheit nach APIFA und BS Automatische Gehäusedruckentlastung Austauschbarkeit der Zapfendichtung bei vollem Leitungsdruck Blow out Sicherung am Zapfen Wartungsfrei Split body design Design according to API Spec. D Self aligning floating seat rings with preload springs Double block and bleed Anti static design Trunnion mounted ball plug Progressive sealing force Secondary sealing Drain and vent connections Fire safe to API FA and BS Self-relief of excess body pressure Stem seal replaceable under full line pressure Anti-blow-out stem Maintenance-free
3 Bauarten-Übersicht Kugelhähne Split body Design overview Ball Valves Split body KS/1-0/III K1XS K1XS Kugelhähne mit Flanschenden Ball valve with flanged ends KXS KXS Kugelhähne mit Einschweißenden Ball valve with welding ends KXS KXS Kugelhähne mit Einschweiß-Flanschenden Ball valve with welding/flanged ends Dichtsysteme Sealing systems Durchgangsdichtung Auf beiden Seiten des Kugelhahndurchganges befinden sich schwimmend angeordnete Sitzringe. Sie sind beweglich zum Kugelküken und können sich zu diesem im erforderlichen Maß einstellen. Die Dichtwirkung erfolgt auf der Kugelhahn- Anströmseite (Piston Effekt PE). Der PCTFE- Dichtring ist im Sitzring geringfügig vorstehend gekammert. O- Ringe dichten die Sitzringe zum Gehäuse hin ab. Spezielle Federelemente gewährleisten durch permanente Anpressung die erforderliche Anfangsdichtkraft. Die Sitzringe wirken selbstentlastend. Seat seal system There are floating seat rings on both sides of the ball valve. They are self adjusting to the ball surface sealing at the upstream side of the valve (Piston Effect PE). The PCTFE seat seal is inserted into the steel seat ring and protrudes slightly. O-rings seal off the seat rings to the valve body. At low pressure the seats are pressed against the ball plug by spring elements. The seat rings are self-relieving.
4 auptwerkstoffe Main materials Gehäusewerkstoffe: Body materials: Baustahl, Druckbehälterstahl, Feinkornbaustahl, Edelstahl, Säurebeständige Stähle, astelloy, als Guß und geschmiedet möglich Duktiles Gußeisen carbon steel, low temperature steel, high temperature steel, stainless steel, special steels, astelloy, casted and forged ductile iron Lieferstandards Standards Auslegung und Konstruktion design Baulänge face-to-face dimension Anschlussmaße mating dimensions Antriebsanschlussmaße actuator connection Prüfung testing Fire-safe Prüfung fire-safe testing Qualitätssicherung quality assurance AD000-A, DIN EN11 ISO1, DIN EN DIN EN ISO DIN EN, ISO00 GOST 1, GOST 11 ISO11 VDI / VDE DIN EN1, IEC0- BS-1 ASME B1., ASME SEC III / VIII API0, MSS SP- ASME B1. API0, MSS SP- ASME B1., ASME B1., ASME B1. MSS SP- API, MSS SP-1 ISO, BS- API0 DIN EN ISO001 GOST R, RTN P0, DIN EN ISO-, DIN EN ISO- Zertifikate Certificats armacon-systems Gmb ansapark 1 11 Magdeburg Germany Tel.: + (0) 1 Fax: + (0) 1 11 info@armacon-systems.de Abweichungen von den bildlichen Darstellungen sowie Maß- und Werkstoffänderungen sind möglich. / Drawing, dimensions and material are subject to change. KS/1-0/VI
5 Kugelhähne Split body Ball Valves Split body PN 0; ANSI 00 DN ; NPS "... 0" Typ/type: KS KS0/1-0/01 Betätigung / operation: andrad / handwheel Elektrischer Antrieb / electric actuator Pneumatischer Antrieb / pneumatic actuator ydraulischer Antrieb / hydraulic actuator interface ISO11, VDI/VDE mögliche Betriebsmedien / possible working mediums: Wasser / water Gas, sour gas Säuren / acids Öl, Benzin / oil, benzine Meerwasser / brine Beton / cement Staub / dust Schlamm / slurry 1 1 Design: AD000-A, DIN EN11 / API0, ASME B1. Baulängen / face-to-face dimensions: DIN EN, ISO / API0, ASME B1. Anschlussmaße / mating dimensions: DIN EN / GOST 1, 11 / ASME B1., B1. / AWWA C0 (siehe / see BS-11/11-0/1) Püfung nach / testing according to DIN EN 1 / API Typ: K1XS Type: K1XS Werkstoffe / materials Pos. item Bauteil Component Standardwerkstoffe bis DN 1" Gehäuse Flansch Kugelküken Betätigungszapfen Passfeder Tellerfeder Stützplatte Sitzring Anlauflager Dichtring O-Ring Feder Entlüftungsventil Getriebeplatte Zapfendichtung Stützring Radialgleitlager Back up Ring Body Flange Ball plug Stem Key Belleville spring Thrust plate Seat ring Thrust ring Seat insert O-ring Spring Bleed valve Mounting plate Stem seal Load ring Sleeve bearing Back up ring TStE TStE G-X0Cr1V XCr1V CK 0CrV II G-X0Cr1V Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 St., verzinkt II St., verzinkt Stahl, up to NB 1" ASTM A 0 Gr. LF ASTM A 0 Gr. LF ASTM A Gr. CA ASTM A Type AISI AISI ASTM A Gr. C ASTM A Gr. CA Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. St., verzinkt ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. St., verzinkt Steel, Standardwerkstoffe über DN 1" ST., vernickelt ST., vernickelt Andere Werkstoffe für höhere Temperaturen oder spezielle Medien auf Anfrage. / Other materials for higher temperature or special mediums on request CK 0CrV II St., verzinkt Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 II Stahl, over NB 1" ASTM A Gr. LCC (mod.) ASTM A Gr. LCC (mod.) ASTM A Gr. C, ENP ASTM A Gr. C, ENP AISI AISI ASTM A Gr. C ASTM A Gr. C, zinc pl. Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. Steel,
6 Abmessungen und e / dimensions and weights KS0/1-0/0 NB Inch / / / / / 1/ 1/1 /1 /0 / 0/ / /0 / /0 / / DN mm /0 0/0 0/0 00/0 0/00 00/0 00/00 0/00 0/00 00/00 0/0 00/00 00/0 0/00 10/00 100/0 0/100 e in kg / s in kg Maße in mm / Dimensions in mm D DF LE LF1* LF* 1 1,,0 1,,0 0,0 0,0,0,0,0 0,0 0,0 1,0,0,0,0 1,0,0,0,0,0,0 11,0 1,0,0,0 1,,0 0,0 0,0,0,0 0,0,0,0 1,0,0,0,0 11,0 1,0,0 0,,0 1,0,,0 0,0,0,0 0,0,0 0,0,0 0,0 10,0 10,0 10,0 10,0 10,0,0,0,0,0 mit reduziertem Durchgang / Reduced bore 0,,0 1,0, 0,0,0 0,0,0 0,0 10,0 10,0 10,0,0,0,0 mit vollem Durchgang / Full bore 1,0,0 0,0,0,0 0,0 0,0 0,0,0 1,0,0,0 11,0 1,0 1,0 1,0,0 1,0,0 11,0 1,0 0,0,0,0 0,0,0,0 0,0 0,0 1,0 11,0 1,0 1,0,0,0 11,0 1,0 0,0 1,,0 0, 0, 01,,,,, 1, 0,, 11,0 1, 1, 1,0,0 1,, 0,0, 1, 1,, 1,,0 0, 0, 01,,,, 1,, 1, 1,0,0,, 1, 1,, *) LF1 = Flansch mit glatter Dichtleiste (RF) / RF-flange *) LF = Flansch mit Ringnut-Dichtleiste (RTJ) / RTJ-flange Technische Änderungen vorbehalten / We reserve the right to make technical alternations.,0,0 1,0 1,0,,,,,1 0, 0, 111, 1, 10,0 1, 1,,,,,0 1,0 1,0,,,,1 0, 111, 1, 1,,, 0,0,,0,,0,,,,0, 0,0, 0,,0,,0 11, 1,,,,,,,0, 0,,0,0,0,0,0,0,0,0 11,0 11,0 1,0 1,0 1,0 1,0 1,0,0 0,0 10,0 1,0,0,0,0,0 11,0 11,0 1,0 1,0 1,0,0 10,0 WE** ,0,0,0,0 0,0 0,0,0,,0,0 0,0,0,0 1,0 0,0 0,0 10,0 WF** ,0,0,0 1,0,0,0 0,0 0,,0,0 1,0,0,0 1,0,0 0,0 1,0 Getriebe Gear Type KG KG 1 KG 1 **) WE = mit Einschweißenden / with butt welding ends **) WF = mit Flanschen / withs flanges Abweichungen von den bildlichen Darstellungen sowie Maß- und Werkstoffänderungen sind möglich. / Drawing, dimensions and material are subject to change. armacon-systems Gmb ansapark 1 11 Magdeburg Germany Tel.: + (0) 1 Fax: + (0) 1 11 info@armacon-systems.de
7 Kugelhähne Split body Ball Valves Split body PN 0; ANSI class 00 DN ; NPS "... 0" Typ/type: KS KS0/1-0/0 Betätigung / operation: andrad / handwheel Elektrischer Antrieb / electric actuator Pneumatischer Antrieb / pneumatic actuator ydraulischer Antrieb / hydraulic actuator interface ISO11, VDI/VDE mögliche Betriebsmedien / possible working mediums: Wasser / water Gas, sour gas Säuren / acids Öl, Benzin / oil, benzine Meerwasser / brine Beton / cement Staub / dust Schlamm / slurry 1 1 Design: AD000-A, DIN EN11 / API0, ASME B1. Baulängen / face-to-face dimensions: DIN EN, ISO / API0, ASME B1. Anschlussmaße / mating dimensions: DIN EN / GOST 1, 11 / ASME B1., B1. / AWWA C0 (siehe / see BS-11/11-0/1) Püfung nach / testing according to DIN EN 1 / API Typ: K1XS Type: K1XS Werkstoffe / materials Pos. item Bauteil Component Standardwerkstoffe bis DN 1" Gehäuse Flansch Kugelküken Betätigungszapfen Passfeder Tellerfeder Stützplatte Sitzring Anlauflager Dichtring O-Ring Feder Entlüftungsventil Getriebeplatte Zapfendichtung Stützring Radialgleitlager Back up Ring Body Flange Ball plug Stem Key Belleville spring Thrust plate Seat ring Thrust ring Seat insert O-ring Spring Bleed valve Mounting plate Stem seal Load ring Sleeve bearing Back up ring TStE TStE G-X0Cr1V XCr1V CK 0CrV II G-X0Cr1V Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 St., verzinkt II St., verzinkt Stahl, up to NB 1" ASTM A 0 Gr. LF ASTM A 0 Gr. LF ASTM A Gr. CA ASTM A Type AISI AISI ASTM A Gr. C ASTM A Gr. CA Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. St., verzinkt ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. St., verzinkt Steel, Standardwerkstoffe über DN 1" ST., vernickelt ST., vernickelt Andere Werkstoffe für höhere Temperaturen oder spezielle Medien auf Anfrage. / Other materials for higher temperature or special mediums on request CK 0CrV II St., verzinkt Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 II Stahl, over NB 1" ASTM A Gr. LCC (mod.) ASTM A Gr. LCC (mod.) ASTM A Gr. C, ENP ASTM A Gr. C, ENP AISI AISI ASTM A Gr. C ASTM A Gr. C, zinc pl. Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. Steel,
8 Abmessungen und e / dimensions and weights KS0/1-0/0 NB Inch / / / / / 1/ 1/1 /1 /0 / 0/ / /0 / /0 / / DN mm /0 0/0 0/0 00/0 0/00 00/0 00/00 0/00 0/00 00/00 0/0 00/00 00/0 0/00 10/00 100/0 0/100 e in kg / s in kg Maße in mm / Dimensions in mm D DF LE LF1* LF* 1 1,0, 1,,0 0,0 0,0,0,0,0 0,0 0,0 1,0,0,0,0 1,0,0,0,0,0,0 11,0 1,0,0, 1,,0 0,0 0,0,0,0 0,0,0,0 1,0,0,0,0 11,0 1,0,0,0,1, 1,1 0,0 0,0,0,0,0 0,0 0,0,0,0 1,0 11,0 1,0 1,0 10,0,0,0,0,0 1,0 mit vollem Durchgang / Full bore 1,0, 0,,,0 0,0 0,0 0,0,0 1,0,0,0 11,0 1,0 1,0 1,0,0 1,0,0 11,0 1,0 0,0,0,1, 1,, 0,,,,0 0,, 11, 1, 1,0,, 1,0,0 10, 0,,0, 11,, 1,0 1, mit reduziertem Durchgang / Reduced bore,0,1, 1,1 0,0,0,0 0,0,0 1,0 11,0 1,0,,0,0,0, 0,,0 0,0 0,0 1,0 11,0 1,0 1,0,0,0 11,0 1,0 0,0, 1, 0,,, 0,, 1,, 1,0,0 0,, 11,, 1,0 *) LF1 = Flansch mit glatter Dichtleiste (RF) / RF-flange *) LF = Flansch mit Ringnut-Dichtleiste (RTJ) / RTJ-flange Technische Änderungen vorbehalten / We reserve the right to make technical alternations.,1,,0,, 0, 1,,,, 100,,,,,1 1,, 1, 0,,,0,, 0, 1,,,,,1 1,, 0, 1,0 1,0 01,,0,0,0, 0, 1,0,,,0 0,,0,,,0 1,0 1,0,0,0, 0, 1,0,0 0,,0,,0,0,0,0 1,0 11,0 1,0 1,0 1,0 11,0 1,0,0,0 0,0,0 0,0,0,0,0,0 11,0 1,0 1,0 1,0,0,0 0,0 0,0 WE** ,0,0,0,0 0,0,0,0 01,,, 1,,, 1, 0, 1, 1, WF** ,0 0,0,0 1,0,0 0,0,0, 1, 1,,,,,, 1, 1, Getriebe Gear Type KG KG **) WE = mit Einschweißenden / with butt welding ends **) WF = mit Flanschen / withs flanges Abweichungen von den bildlichen Darstellungen sowie Maß- und Werkstoffänderungen sind möglich. / Drawing, dimensions and material are subject to change. armacon-systems Gmb ansapark 1 11 Magdeburg Germany Tel.: + (0) 1 Fax: + (0) 1 11 info@armacon-systems.de
9 Kugelhähne Split body Ball Valves Split body PN 0; ANSI class 00 DN ; NPS "... " Typ/type: KS KS0/1-0/0 Betätigung / operation: andrad / handwheel Elektrischer Antrieb / electric actuator Pneumatischer Antrieb / pneumatic actuator ydraulischer Antrieb / hydraulic actuator interface ISO11, VDI/VDE mögliche Betriebsmedien / possible working mediums: Wasser / water Gas, sour gas Säuren / acids Öl, Benzin / oil, benzine Meerwasser / brine Beton / cement Staub / dust Schlamm / slurry 1 1 Design: AD000-A, DIN EN11 / API0, ASME B1. Baulängen / face-to-face dimensions: DIN EN, ISO / API0, ASME B1. Anschlussmaße / mating dimensions: DIN EN / GOST 1, 11 / ASME B1., B1. / AWWA C0 (siehe / see BS-11/11-0/1) Püfung nach / testing according to DIN EN 1 / API Typ: K1XS Type: K1XS Werkstoffe / materials Pos. item Bauteil Component Standardwerkstoffe bis DN 1" Gehäuse Flansch Kugelküken Betätigungszapfen Passfeder Tellerfeder Stützplatte Sitzring Anlauflager Dichtring O-Ring Feder Entlüftungsventil Getriebeplatte Zapfendichtung Stützring Radialgleitlager Back up Ring Body Flange Ball plug Stem Key Belleville spring Thrust plate Seat ring Thrust ring Seat insert O-ring Spring Bleed valve Mounting plate Stem seal Load ring Sleeve bearing Back up ring TStE TStE G-X0Cr1V XCr1V CK 0CrV II G-X0Cr1V Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 St., verzinkt II St., verzinkt Stahl, up to NB 1" ASTM A 0 Gr. LF ASTM A 0 Gr. LF ASTM A Gr. CA ASTM A Type AISI AISI ASTM A Gr. C ASTM A Gr. CA Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. St., verzinkt ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. St., verzinkt Steel, Standardwerkstoffe über DN 1" ST., vernickelt ST., vernickelt Andere Werkstoffe für höhere Temperaturen oder spezielle Medien auf Anfrage. / Other materials for higher temperature or special mediums on request CK 0CrV II St., verzinkt Stahl, (comp.) / PCTFE NIRO 1., Inconel X0 II Stahl, over NB 1" ASTM A Gr. LCC (mod.) ASTM A Gr. LCC (mod.) ASTM A Gr. C, ENP ASTM A Gr. C, ENP AISI AISI ASTM A Gr. C ASTM A Gr. C, zinc pl. Steel, (comp.) / PCTFE AISI 01, Inconel X0 ASTM A Gr. C, zinc pl. ASTM A Gr. C ASTM A 0 Gr. C, zinc pl. Steel,
10 Abmessungen und e / dimensions and weights KS0/1-0/0 NB Inch / / / / / 1/ 1/1 /1 /0 / 0/ / /0 / /0 DN mm /0 0/0 0/0 00/0 0/00 00/0 00/00 0/00 0/00 00/00 0/0 00/00 00/0 0/00 10/00 D DF LE LF1* LF* 1 1,0, 1,,0 0,0 0,0,0,0,0,0,0,0 1,0,0,0,0,0,0,0 00,0,0 11,0, 1,,0 0,0 0,0,0,0,0,0,0,0,0 00,0,0,0 1,,1 1,0,,1 0, 0,0 0,0,0,0,0 0,0,0 10,0 10,0 1,0 1,0,0,0 0,0 0,0,0 mit vollem Durchgang / Full bore mit reduziertem Durchgang / Reduced bore 1,,1 1,0,,1 0, 0,0,0,0 10,0 10,0 1,0,0 0,0 0,0 1,0 0,,,0,0 00,0 0,0,0,0,0,0 1,0 11,0 1,0 1,0 1,0,0 11,0 1,0,0 0,,,0 00,0 0,0,0 1,0 11,0 1,0 1,0 11,0 0,0,0 1,0,0,0,,,, 1, 11, 10, 1,, 0, 01,,0, 11, 1,,0, 0,0, 1,0,0,0,,, 1, 11, 1, 01,,0, 1,, 1,0,0, 0,0 1,0, 1,,, 11, 11, 1,,, 1,,0 0, 101, 00, 1,0 11,,,,0, 0,0 1,0, 1,, 11, 11,,,0 0, 101, 1,0,, 111, 11,0,0,0,0 0,0,0,0 0,0,0 0,0 0,0 0,0 0,0 00,0,0,0,0,0 0,0,0,0 0,,0 1,0,,0, 1,0,0,0 0,,,0,0 0,0 0,0 01,0 0,0,0,,0,0 11, 11,0 1,0, 1, 1,,0,0, 11, 00,,0 1, 1,0 11,0 10,0 1,0 1,0 1,0 0,0 WE** 1,0,0,0 0,0 01,0,0,0,, 0, 111, 1,0 111,1,0 1,,,,1 11, 0,, 10,, 11,0,0,0,0 0,0,0,0, 1,,,, 0, 1,, WF** 1,0,0,0 0,0 1,0,0 0,0 0, 11, 11, 0,1,, 0,,, 01,,,0 10,, 1,,,0,0 1,0,0,0,0,0 1, 1, 0, 0,,1, 111,, Getriebe Gear Type KG KG KG KG Abweichungen von den bildlichen Darstellungen sowie Maß- und Werkstoffänderungen sind möglich. / Drawing, dimensions and material are subject to change. e in kg / s in kg Maße in mm / Dimensions in mm *) LF1 = Flansch mit glatter Dichtleiste (RF) / RF-flange *) LF = Flansch mit Ringnut-Dichtleiste (RTJ) / RTJ-flange Technische Änderungen vorbehalten / We reserve the right to make technical alternations. **) WE = mit Einschweißenden / with butt welding ends **) WF = mit Flanschen / withs flanges armacon-systems Gmb ansapark 1 11 Magdeburg Germany Tel.: + (0) 1 Fax: + (0) 1 11 info@armacon-systems.de
MX13. Kugelhähne Top entry Typ KHT Ball Valves Top entry Type KHT PN ; ANSI class DN ; NPS 2"...
MX Kugelhähne Top entry Typ KHT Ball Valves Top entry Type KHT PN 0... 00; ANSI class 00... 00 DN 0... 00; NPS "... 0" Technische Merkmale Technical characteristics KHT/-0/II PN 0... 00; ANSI class 00...
MehrSchieber Gate valves. PN ; ANSI class DN ; NPS 1/4".. 56"
0-00 Schieber Gate valves PN.. 400; ANSI class 12.. 200 DN.. 1400; NPS 1/4".. " ARAMCO Vendor ID: 1004441 ARAMCO Plant ID: 00042 Approved COM: 0000002 0000002 00000024 0000002 0000002 0000002 Technische
MehrPos. Item. DN L H H 1 D d 1 d 2 b n x d 3 d 4
Class 150 Class 150 Ausführung Schieber mit aussenliegender Spindel mit elastischem Keil und steigender Spindel mit Flanschanschluss Baulänge nach ANSI B16.10 DN 2 12 Design Gate valve with outside screw
MehrKipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN Class 75 / 150, Size 12"... 40"
WASSERARMATUREN Valves for drinking and sewage water Kipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN 00... 1000 Class 75 / 150, Size 12"... 40" Kipp-Rückschlagklappen Typ
Mehrarmacon-valves Typ TS / TC armacon-valves type TS / TC (Tricentric high performance butterfly valve with full bore)
609-0057 armacon-valves Typ TS / TC armacon-valves type TS / TC (Tricentric high performance butterfly valve with full bore) PN 6.. 400; ANSI class 125.. 2500 DN 50.. 3600; NPS 2".. 144" ARAMCO Vendor
MehrKugelhähne. Split Body
Kugelhähne Split Body > Kugelhähne Split Body Zulassungen und Standards API Spec. 607 American Society for Testing and Materials American Society of Mechanical Enginners National Association of Corrosion
MehrFlansch Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design
Absperrklappe schweiß Konstruktion Flanged Butterfly Valve welded design Doppelt exzentrische Absperrklappe Double offset Flanged Butterfly Valve Type: AKF DN: 200 3000 (8 120 ) PN: 6 40 (Class 125 300)
MehrFSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type
FSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type FSKH mit Abschließvorrichtung und Endschalter FSKH with locking device and position switch (F)SKH SAE (F)SKH SAE Größen: 13 bis 50 Gehäuse:
MehrSchieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW PN 2, ; DN Class ; Size 2"...
WASSERARMATUREN Valves for drinking and sewage water Schieber, metallisch dichtend Typ GTW Gate valves, metal seated type GTW,5... 0; 50... Class 75... ; Size "... 5" Schieber, metallisch dichtend Typ
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Schieber, weich dichtend Gate valves, soft seated PN 0... 0, DN 0... 00 Class 7... 00, Size ½"... " Schieber, weich dichtend Typ GTS Gate valves, soft
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrFK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend. FK-ball valve acc. to DIN 3357, BS 5351, ASME B16.
Nr. 1 FKKugelhahn nach DIN 57, BS 1, ASME B.4 metallisch dichtend mit Flanschanschluss PN 10 PN oder ASME Class bzw. Class 00, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte Kugel,
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrFlow through sight glasses Nr. 440/450
Flow through sight glasses Nr. 4/450 Durchfluss-Schaugläser in Eckform (Nr. 4) und Dreiwegeform (Nr. 450) mit Flanschanschluss bis Gehäuse in Schweißkonstruktion mit Einlaufstutzen, beiderseits Schauglasplatten
MehrWASSERARMATUREN Valves for drinking and sewage water
WASSERARMATUREN Valves for drinking and sewage water Schwimmerventile Typ VDF 1 Float valves type VDF 1 PN 16 / 10, DN 0... 50 Class 75 /, Size 1 ½"... 18" Schwimmerventile Typ VDF 1 Float valves type
MehrGate Valve Absperrschieber
Gate Valve Absperrschieber Cast steel Stahlguß Type GA 100 PN 16 100 DN 50 600 11 14 15 23 13 20 18 22 6 12 16 19 21 2 24.1, 24.2 4 5 7 10 8 9 1 Created / Erstellt Checked / Geprüft Quotation / Angebot
MehrARGUS Flanged ball valve EK71 Technical data sheet
Flanged ball valve EK71 Technical data sheet DN15 (1/2 ) DN50 (2 ) PN16 PN100, ANSI150 ANSI600 Material: carbon steel / low temperature carbon steel / stainless steel Sealing system: soft seated split
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrFK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend
Ball Valves Nr. FKKugelhahn nach DIN 7, BS 1, ASME B.4 metallisch dichtend mit Flanschanschluss PN 10 PN oder ASME Class bzw. Class 00, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte
MehrProduktübersicht Product Range
Produktübersicht Product Range Unternehmensprofil Gegründet:...1956, Familienunternehmen Geschäftsführer:...Dr. Ing. Thomas Böhmer Mitarbeiter:...250 Jahresumsatz:...60 Mill. DEM Produktionsfläche:...25.000
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrWerkstoffe Materials Spindel, Spindelmutter und Stopfbuchsschrauben Stem, stem nut and stuffing box screws
Nr..1 SäureAbsperrschieber nach DIN 52 mit Flanschanschluss, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 551 Grundreihe (), Grundreihe
MehrGate valves Nr
SäureAbsperrschieber nach DIN 52 mit Flanschanschluss 6, mit Bügelaufsatz, steigender Spindel, außenliegendem Spindelgewinde und nicht steigendem Handrad. Baulänge nach DIN EN 5581 Grundreihe 1 (), Grundreihe
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / 282
1 fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10
MehrHochdruck-Kupplungen Typ HDK Type HDK high-pressure couplings
Hochdruck-Kupplungen Typ HDK Type HDK high-pressure couplings DN 6 bis 32 bis max. PN 450 bar DN 6 to 32 to max. PN 450 bar Für besondere Druckbelastung Robuste Bauweise hervorragende Durchflußleistung
MehrStandard. Benennung Werkstoff Article Material
BROEN BALLOMAX PN6/40, DN 0-50 Standard 0 2 3 6 4 5 Fully welded steel ball valve A Schweißende Stahl W.-Nr..0254 Welding end Steel St 3.0 A Innengewinde Stahl W.-Nr..050/.0254 Female end Steel St 52/St
MehrKipp Rückschlagklappe Tilting Check Valve
Kipp Rückschlagklappe Tilting Check Valve Mit Dämpfung / with damping system Type: 8 RK, 8 RK M, 8 RK E DN: 100 1400 (4 56 ) PN: 10 25 (Class 125 150) Temp: 0 C +80 C FALKNER Armaturenvertriebs GmbH Tel:
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrInhaltsverzeichnis Index
Sicherheits- / Entlastungsventile, für Lebensmittel - Pharmazie Safety- / Relief-Valves, Food - pharmacy 5 Inhaltsverzeichnis Index Ventil Valve Typ 44 Verwendung Use Entlastungsventil, federbel. Lebensmittel
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrKugelhähne, beidseitig gelagert, geteiltes Gehäuse Typ HPA, HRA, DB FCT
HPA, HRA, DB FCT Kugelhähne mit geteiltem Gehäuse, beidseitig gelagerter Kugel, Double Block and Bleed Funktion, für den Einsatz in Öl und Gas auch unter schwierigen Bedingungen Merkmale Kugelhähne, geteiltes
MehrDESIGN 1-piece designed wafer-type ball valve, full bore, mounting pad for actuator according to ISO 5211, TA-Luft approval
Technische Daten BAUFORM 1-teilige kompakte Körperkonstruktion, voller Durchgang, Flanschplatte für Antrieb nach ISO 5211, TA-Luft Zulassung BETÄTIGUNG 90 -Drehung des Handhebels (Um jeweils 180 gegen
Mehr42 QUALITY SINCE Ball Valves KUGELHÄHNE
594 High-Temperature-Ball Valve DIN-DVGW for Gas and Potable Water Hochtemperatur-Kugelhahn DIN-DVGW für Gas und Trinkwasser ROSTECHNADZOR (GGTN) 1 Cu Zn 40 Pb 2 - DIN EN 12165 2 3/8-1 Cu Zn 39 Pb 3 -
MehrRückschlagklappen Kunststoff Swing check valves plastic
Übersicht / Overview Baureihe Type Ausführung Design Gehäuse: PVC-U Klappe: Feder: PVC-U Edelstahl.7, Hastelloy C (.0) Dichtungen:NBR, EPDM, FPM (Viton) oder PTFE Druckbereich: 0 bis bar Body: Disc: Spring:
Mehrwatergates knife-gate-valves - Stoffschieber
watergates knife-gate-valves - Stoffschieber Technische Daten BAUFORM Keilflachschieber mit Innenspindel, DIN 3352/4A, weichdichtend, wartungsfrei. Für den Einsatz im Nutz- und Abwasserbereich. VORTEILE
MehrProduktübersicht Product Range
Produktübersicht Product Range Unternehmensprofil Company s Profile Gegru ndet:... 1956, Familienunternehmen Established:... 1956, family owned company Geschäftsfu hrer:... Dr. Ing. Thomas Böhmer Managing
MehrTechnische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. OHG Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008
MehrSpecification. DESIGN Body consists of one part MR3400xx approval acc. to 1935/2004/EC. CONNECTION Female thread 1 /4" up to 4" acc.
Technische Daten BAUFORM -teilige Körperkonstruktion MRxx mit Zulassung nach 9//EG ANSCLUSS Innengewinde: /" bis " nach ISO EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten Einbau. Durchfl
MehrEinsitzventile SVP M2000. Single Seat Valves SVP M2000. Ventiltechnik für jeden Einsatzbereich. Valve Technology for Every Application Area 2.
Einsitzventile SVP M2000 Ventiltechnik für jeden Einsatzbereich Inhalt.0 Allgemeine Informationen und technische Daten.1 Eck-, Doppeleck- und Kreuzventile.2 Entnahme- und Durchgangsventile.3 Schrägsitz-
Mehr2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
MehrSSO. angle type. Eckform. Anwendung: Application: Pos. Teil / part Material 11.0
11.011.6.cdr Schnellschlußventil SSO quickclosing valve TS [ C] PS [bar] PS [bar] 60 18,7 30 10 25 40 + 50 25 40 + 0 25 40 ckform angle type Anwendung: inbau in Ölablaßleitungen ( Ölablaßventil ) an besonders
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrARGUS Ball valve FK 76M / 78 (M) ARGUS Kugelhahn FK 76M / 78 (M)
ARGUS Ball valve FK 76M / 78 (M) ARGUS Kugelhahn FK 76M / 78 (M) Technical design features: Technische Konstruktionsmerkmale: Design to API 6D / ANSI B 16.34 resp. PED 97/23/EC; BS 5351 available on request.
MehrBROEN BALLOMAX PN40, DN 15-50
Dealing with forces of nature BROEN BALLOMAX PN40, DN 15-50 Auf Wunsch auch mit Knebelgriff. Available with T-handle upon request. Beidseitig Flansche Vollverschweißter Stahlkugelhahn Materialbeschreibung
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrRohre ASME 2014 rff Stark verbunden. Technische Grundlagen Pipes Technical basics
Rohre ASME 2014 rff Stark verbunden. Rohre Technische Grundlagen Pipes Technical basics ASME 2 rff.de Inhalt Content Über rff About rff Expertise in ASME Expertise in ASME 4 / 5 Lieferprogramm DIN EN /
MehrEDELSTAHL STAINLESS STEEL
EDESTA 1-teiliger Muffenkugelhahn, PN 6 red. Durchgang Innengewinde 1 /" DIN EN 26-1:0 (alt. DIN 2999) Gehäuse:. Nr. 1. Kugel:. Nr. 1.1 Spindel:. Nr. 1.301 ring, Federring, Mutter:. Nr. 1.301 Kugeldichtungen:
MehrPneumatische Stellantriebe, Typen GTK, GTW, GTX. pneumatic actuators type GTK, GTW, GTX ATTUATORI EUROPE PNEUMATIC ACTUATORS AND ACCESSORIES
ATTUATORI EUROPE PNEUMATIC ACTUATORS AND ACCESSORIES Pneumatische Stellantriebe, Typen GTK, GTW, GTX pneumatic actuators type GTK, GTW, GTX CE, ATEX, GOST, SIL3 ATTUATORI EUROPE PNEUMATIC ACTUATORS AND
MehrPISTER. SAE-FlanschKUGELHÄHNE. FlangedBALL VALVES SAE. Kugelhähne
SAE-Flansch-KUGELHÄHNE Flanged BALL VALVES SAE PISTER Kugelhähne SAE-FlanschKUGELHÄHNE Serie 540 DN 13-25 Serie 550 DN 13-50 Serie 330 DN 65-100 3000 psi und 6000 psi Gehäuse, Flanschen, Kugel und Schaltwelle
MehrARGUS Ball valve FK 79
Technical design features: Design to API 6D / ANSI B 16.34 resp. PED 97/23/EC. Design to BS 5351 available on request. Konstruktion nach DGRL + AD 2000 Merkblatt, ANSI B16.34 bzw. API 6D, BS 5351 auf Anfrage.
MehrHOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV
HOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV EIGENSCHAFTEN Nennweite: DN - 1 mm Baulänge: DIN, ASME, ISO Betriebsdrücke: 1 - bar Auf/Zu-Ventile Regelventile (elektrisch/ elektro-pneumatisch)
MehrARGUS Flanged ball valve FK75M Technical data sheet
Flanged ball valve FK75M Technical data sheet DN65 (2 1/2 ) DN150 (6 ) PN10 PN40, ANSI150 ANSI300 Material: low temperature carbon steel / stainless steel Sealing system: soft seated / full metal seated
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrDouble Offset Butterfly Valves Series 2E-5
Double Offset Butterfly Valves Series 2E-5 flow control Energetik / Petrochemie energy / petrochemistry DN 50 - DN 800-100 C bis + 500 C - 100 C up to + 500 C HOCHLEISTUNGSABSPERRKLAPPEN DOPPELEXZENTRISCH
MehrEdelstahl / Stainless Steel 316 ti VERSCHLUSS - KUPPLUNG / RELEASE COUPLING. Katalog 1/06 / Catalogue 1/06 Seite / page 19.
VERSCHLUSS - KUPPLUNG / RELEASE COUPLING 19 Seite / page 19.0 317 VERSCHLUSS - KUPPLUNG / RELEASE COUPLING KAPITEL 19 Übersicht SECTION 19 Visual Index ISO 7241-1B-Strd. 19.02 ISO 7241-1B-Big Size 19.03
MehrVAG-Rückstauklappe PN 1,0
VAG-Rückstauklappe PN 1,0 Kreisform mit Flanschanschluss, mit Steinschrauben, mit Schwimmerhohldeckel, mit einfachem eckel, mit Hebel und Gegengewicht VAG Flap Valve PN 1,0 Circular Shape with flange connection,
Mehr2-Teiliger Kugelhahn 2-piece ball valve
15-200 DIN PN 1 / PN 40 Voller Durchgang ISO-Aufbauflansch Edel- und Kohlenstoffstahl Chemietaugliche und feuerfeste Ausführung Size 1/2" to 8" PN 1 / PN 40 Full bore ISO top flange Stainless steel and
MehrGODI. Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, Inside Sealing. Slide and O-Ring Seal, inside sealing
Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, inside sealing Der Hunger Gleitring-O-Ring-Dichtsatz ist ein schmalbauendes Element zur Abdichtung von Stangen. Er ist für einfache und
MehrTurbine Drain Valve Turbinen-Entwässerungsventil
Turbine Drain Valve Turbinen-Entwässerungsventil Type 172 A, 172 J PN 100 400 DN 25 65 28 29 30 31 32 86 85 34 35 36 37 38 41 14.1 13 3 43 1 27 26 25 24 23 22 21 20 19 18 17 16 15 5 4 14 12 172 J 3-stage
Mehrfilter/sight glasses Filter/Schaulaternen
pipes Rohre 1 pipe unions Rohrverbindungen 2 fittings Rohrformstücke 3 TC-fittings TC-Verbindungen 4 butterfly valves Scheibenventile 5 cocks/pigging systems Hähne/Molchsysteme 6 seat valves Ventile 7
MehrDATENBLATT Sicherheitsventil / safety valve Typ : G14-S
Zulassung/ CE 97/23/EG homologation : TÜV/ISPESL/ ASME Druckbereich / pressure range: 0,3-60,0 bar CE 1 60 bar ASME Anschlussgewinde / G ½ / G ¾ G1" (ISO 228) inlet connection : R ½ / R ¾ R1" (ISO 7) oder
MehrGehäuse Stahl verzinkt oder Edelstahl body steel zinc coated or stainless steel
Gasmessventil GV gas measuring valve GV GV (Grundventil basic valve) GV-BE GV-DKO GV-GV Abbildung ggf. abweichend picture may be different Gehäuse verzinkt oder Edelstahl body zinc coated or stainless
MehrABSPERRKLAPPE SERIE 27 Pneumatik-Antrieb - Actreg
C D E FIGUR: AD: pneumatischer Schwenkantrieb, doppeltwirkend AS: pneumatischer Schwenkantrieb, einfachwirkend (Federschließend) ABSPERRKLAPPE SERIE 27 Pneumatik-Antrieb - Actreg G F L ABMESSUNGEN: (mm)
MehrDATENBLATT Sicherheitsventil / safety valve Typ : G20-S
Zulassung/ CE 97/23/EG homologation : TÜV/ISPESL/ASME Leistungsdaten Durchfluss/ flow range Luft /air Druckbereich / pressure range: 0,3-60,0 bar 1 55 ASME Anschlussgewinde / inlet connection : G 1 / G
MehrRückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated
Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated Betriebsdruck bis 320 bar Working pressure up to 320 bar Nenndurchfluss bis 200 l/min Nominal flow
MehrVOLLVERSCHWEISSTE KUGELHÄHNE
VOLLVERSCHWEISSTE KUGELHÄHNE 2 LEISTUNG AUF GANZER STRECKE Insbesondere für Medien wie Öl und Gas müssen die eingesetzten Armaturen höchste Anforderungen erfüllen, um die Absicherung der Rohrleitung auf
MehrStahlgitterwiderstandselemente. Steel Grid Resistor Elements RSW 1 RSW 54. RSW 1 to RSW W für Einbau. 500 W for fitting
Stahlgitterwiderstandselemente Steel Grid Resistor lements 500 W für inbau 500 W for fitting Stahlgitterwiderstandselemente RSW RSW 54 500 W für inbau Steel Grid Resistor lements RSW to RSW 54 500 W for
MehrMessanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P
Messanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P Beispiele Examples Behälter/vessel Nummer Art der Messung offen geschl. Messumformertyp Medium number kind of measurement
Mehr01 Kleinventile DN6 bis 12 als Service-, Entleerungs- und Manometerventile Small Valves DN6 to 12 as Service-, Purge- and Pressure Gauge Valves
01 Kleinventile DN6 bis 12 als Service-, Entleerungs- und Manometerventile Small Valves DN6 to 12 as Service-, Purge- and Pressure Gauge Valves DN Eck Angle Durchgang Globe Material 1 Typ type Seite page
Mehr07 Ventile valves. 7. Ventile valves. 7.1 Ecküberströmventil 7.2 Bodensitzventil 7.3 Tellerrückschlagventil 7.4 Probenahmeventil
07 Ventile valves 7. Ventile valves 7.1 Ecküberströmventil 7.2 Bodensitzventil 7.3 Tellerrückschlagventil 7.4 Probenahmeventil overflow valve bottom seat valve non return disk valve sampling valve 7.5
MehrButterfly control valve type GGD. Drosselklappe Typ GGD. OHL Gutermuth Industrial Valves GmbH
Drosselklappe Typ GGD insatzgebiete: z. B. Chemie, Petrochemie u. a. für Abgas, Heißgas, Rauchgas, Brüdendampf Merkmale: DN 100 - DN 2000 bzw. 4 80 Klappenscheibe anschlagend Leckrate 0,05% Kvs 90 inklemmausführung
MehrASME Rohrformteile 2014 rff Stark verbunden. Rohrformteile Buttweld Fittings B 16.9
ASME Rohrformteile 2014 rff Stark verbunden. Rohrformteile Buttweld Fittings B 16.9 ASME 2 rff.de rff Stark verbunden. Inhalt Content Über rff About rff Expertise in ASME Expertise in ASME 4 / 5 Lieferprogramm
MehrReferenzen EKN References EKN
Referenzen EKN References EKN 02/2004 ENBW/ Kernkraftwerk Philippsburg Projekt/Project: ENBW/ Kernkraftwerk Philippsburg/nuclear power plant Philippsburg Datum/Date: 1998 Produkt/Product: VAG EKN Absperrklappe
MehrEHAZ Base Line Elektro-Hydraulik Antrieb electro-hydraulic actuator
technical information Seite / page 1/3 Antriebstyp Losbrechmoment min. Stellzeit Maße Gesamtgewicht actuator type valve break torque min. operating dimensions total weight (Nm) time (sec.) L x B x H (mm)
MehrTurbine Drain Valve Turbinen-Entwässerungsventil
Turbine Drain Valve Turbinen-Entwässerungsventil Type 172 A, 172 J Class 150 2500 NPS 3/4 2½ 28 29 30 31 32 86 85 34 35 36 37 38 41 14.1 13 3 43 1 27 26 25 24 23 22 21 20 19 18 17 16 15 5 4 14 12 172 J
MehrStahl verzinkt (Cr3) Steckkupplungen Typ 63 Quick release couplings
Stahl verzinkt (Cr3) Anwendung: Schnellverschlusskupplungen sind beidseitig absperrende Steckkupplungen mit Kugelverriegelung. Die Ventile in Muffe und Stecker öffnen und schließen beim Kupplungsvorgang
MehrVENUS TECHNICAL FEATURES:
SECTION / QUERSCHNITT packing O-ring O-Ring Schaltwellenabdichtung NBR for gas from 20 C to +60 C Pressure limits: for gas MOP5 (20) The VENUS valve, with full bore, has been designed to comply with European
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrHochdruck Absperrschieber P und K High pressure gate valve P and K
Hochdruck Absperrschieber P und K High pressure gate valve P and K A-T Armaturen-Technik GmbH Babcock T-Bldg Tel.: +49 208 833 1700 E-Mail: sales@at-armaturen.com Duisburger Straße 375 46049 Oberhausen
MehrButterfly Valves Nr. 110
TRI-EX -Absperrklappe metalldicht, Typ AK 110, PN 10 bis PN 40, t = -60 C bis +400 C, Baulänge EN558-2 zum Einschweißen oder mit Flanschen, für Betriebsdrücke bis zu 50 bar. Klappenscheibe doppeltexzentrisch
Mehr