6-lead MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6SG
|
|
- Beate Maus
- vor 6 Jahren
- Abrufe
Transkript
1 6-lead MULILED Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LRB G6SG Vorläufige Daten nach OS-PCN-6-6--B / Preliminary Data acc. to OS-PCN-6-6--B Besondere Merkmale Gehäusetyp: weißes P-LCC-6 Gehäuse, (RGB-Displays) und diffusem Silikon Verguss Besonderheit des Bauteils: additive Farbmischung durch unabhängige nsteuerung aller Chips Wellenlänge: 65 nm (rot), 58 nm (true green), 458 nm (blau) bstrahlwinkel: Lambertscher Strahler ( ) echnologie: hinfilm (rot), hingan (true green, blau) optischer Wirkungsgrad: 43 lm/w (rot), 36 lm/w (true green), lm/w (blau) Gruppierungsparameter: Lichtstärke, Wellenlänge Verarbeitungsmethode: für alle SM-Bestücktechniken geeignet Lötmethode: Reflow Löten Vorbehandlung: nach JEDEC Level 4 Gurtung: mm Gurt mit /Rolle, ø8 mm oder 4/Rolle, ø33 mm ESD-Festigkeit: ESD-sensitives Bauteil nwendungen nzeigen im Innen- und ußenbereich (z.b. im Verkehrsbereich; Laufschriftanzeigen) Getrennte nteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive weiß Vollfarbdisplays bzw. RGB-Displays Blitzlicht im Handy Hinterleuchtung (LCD, Schalter, asten, Werbebeleuchtung, llgemeinbeleuchtung) Einkopplung in Lichtleiter Features package: white P-LCC-6 package, diffused silicone resin feature of the device: additive mixture of color stimuli by independent driving of each chip wavelength: 65 nm (red), 58 nm (true green), 458 nm (blue) viewing angle: Lambertian Emitter ( ) technology: hinfilm (red), hingan (true green, blue) optical efficiency: 43 lm/w (red), 36 lm/w (true green), lm/w (blue) grouping parameter: luminous intensity, wavelength assembly methods: suitable for all SM assembly methods soldering methods: reflow soldering preconditioning: acc. to JEDEC Level 4 taping: mm tape with /reel, ø8 mm or 4/reel, ø33 mm ESD-withstand voltage: ESD senitive Device pplications indoor and outdoor displays (e.g. displays for traffic; light writing displays) LED chips can be controlled seperately to display various colors including white full color displays, RGB-Displays strobe light for cellular phones backlighting (LCD, switches, keys, illuminated advertising, general lighting) coupling into light guides 9-
2 LRB G6SG Bestellinformation Ordering Information yp Emissionsfarbe ) Seite 3 Lichtstärke ype LRB G6SG Color of Emission red true green blue ) page 3 Luminous Intensity = m I V (mcd) red true green blue Bestellinformation Ordering Information yp ype LRB G6SG-U4-+VB4+SU5 LRB G6SG-U4-+VB4+SV-68 Bestellnummer Ordering Code Q65947 Q65944 nm: Die oben genannten ypbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRB G6SG-U4-+VB4+SV-68 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen U4, U, U6, V, V4, V, V6 oder enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlängengruppe geliefert. Z.B.: LRB G6SG-U4-+VB4+SV-68 bedeutet, dass auf dem Gurt nur eine der Wellenlängengruppen -,,, oder enthalten ist (siehe Seite 8 für nähere Information). Z.B.: LRB G6SG-U4-+VB4+SV-68 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden. Note: he above ype Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRB G6SG-U4-+VB4+SV-68 means that only one group U4, U, U6, V, V4, V, V6 or will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRB G6SG-U4-+VB4+SV-68 means that only wavelength group -,,, or will be shippable (see page 8 for explanation). E.g. LRB G6SG-U4-+VB4+SV-68 means that the device will be shipped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 9-
3 LRB G6SG Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current ( =5 C) Stoßstrom Surge current = μs,.5, =5 C ) Seite 3 Sperrspannung Reverse voltage ( =5 C) ) page 3 Leistungsaufnahme Power consumption ( =5 C) Wärmewiderstand hermal resistance Sperrschicht/Umgebung 3) page 3 Junction/ambient 3 Sperrschicht/Lötpad Junction/solder point 3) Seite 3 chip on chips on Symbol Symbol red Werte Values true green blue op 4 + C stg 4 + C j + 5 C 7 5 m M 3 3 m V R 5 V Einheit Unit P tot 95 mw R th J R th J R th JS K/W K/W K/W 9-3
4 LRB G6SG Kennwerte Characteristics ( = 5 C) Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength aeak emission = m 4) Seite 3 Dominantwellenlänge (min.) 4) page 3 Dominant wavelength (typ.) = m Spektrale Bandbreite bei 5 % I rel max Spectral bandwidth at 5 % I rel max = m (typ.) (max.) (typ.) Symbol Symbol red Werte Values true green blue λ peak nm λ dom Einheit Unit nm nm nm Δλ nm bstrahlwinkel bei 5 % I V (Vollwinkel) (typ.) ϕ Grad Viewing angle at 5 % I V deg. 5) Seite 3 Durchlassspannung (min.) 5) page 3 Forward voltage (typ.) = m (max.) Sperrstrom (typ.) Reverse current (max.) V R = 5 V (blue / true green); V (red) emperaturkoeffizient von λ peak emperature coefficient of λ peak = m; C C emperaturkoeffizient von λ dom emperature coefficient of λ dom = m; C C emperaturkoeffizient von V F emperature coefficient of V F = m; C C Optischer Wirkungsgrad Optical efficiency = m * Einzelgruppen siehe Seite 8 Individual groups on page 8 (typ.) (typ.) (typ.) (typ.) V F V F V F.8..4 I R. I R V V V μ μ C λpeak nm/k C λdom.7.3. nm/k C V mv/k η opt lm/w 9-4
5 LRB G6SG 6) 7) Seite 3 Farbortgruppen Chromaticity Coordinate Groups 6) 7) page 3 7 Gruppe Group Cx Cy Gruppe Group red nm.: Note: y true green red 63 Die Farbkoordinaten des Mischlichtes können innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. he color coordinates of the mixed light can be expected within the marked area of the color triangle Cx OH84 48 blue x Cy 9-5
6 LRB G6SG Floating Bins red U4 = U = U6 = V = V4 = V = 9... V6 = =... 4 Floating Bins true green V = 9... V6 = = = B = = B = B4 =
7 LRB G6SG Floating Bins blue S = S4 =... 5 S = S6 = = = = = U = U4 = U = U6 = V =
8 LRB G6SG 4) Seite 3 Wellenlängengruppen (Dominantwellenlänge) 4) page 3 Wavelength Groups (Dominant Wavelength) Gruppe Group true green Einheit Gruppe blue Unit Group min. max. min. max nm nm nm nm nm nm nm nm nm nm Einheit Unit Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: -+U+R-7 Example: -+U+R-7 Helligkeitsgruppe Brightness Group Wellenlänge (keine Gruppierung) Wavelength (no grouping) Helligkeitsgruppe Brightness Group Wellenlänge Wavelength Helligkeitsgruppe Brightness Group Wellenlänge Wavelength (red) (red) (true green) (true green) (blue) (blue) U 4 R 7 nm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 9-8
9 LRB G6SG 6) Seite 3 Relative spektrale Emission 6) page 3 Relative Spectral Emission V(λ) = spektrale ugenempfindlichkeit / Standard eye response curve I rel = f (λ); = 5 C; = m % OHL53 I rel 8 V λ 6 4 red blue true green nm 7 λ 6) Seite 3 bstrahlcharakteristik 6) page 3 Radiation Characteristic I rel = f (ϕ); = 5 C 4 3 OHL66 ϕ
10 LRB G6SG 6) Seite 3 Durchlassstrom 6) page 3 Forward Current = f (V F ); = 5 C; red m 5 OHL573 6) 7) Seite 3 Relative Lichtstärke Relative Luminous Intensity I V /I V( m) = f ( ); = 5 C I V I V ( m) 6) 7) page 3 OHL blue true green red V.7 V F 6) Seite 3 Durchlassstrom 6) page 3 Forward Current = f (V F ); = 5 C; blue, true green m 5 OHL359-5 m I 6) Seite 3 Relative Lichtstärke Relative Luminous Intensity I V /I V(5 C) = f ( ); = m I V I V (5 C).8.6 6) page 3 F OHL54.4 red blue true green V 5 V F C j 9-
11 LRB G6SG 6) Seite 3 Dominante Wellenlänge 6) page 3 Dominant Wavelength blue, λ dom = f ( ); = 5 C λ dom 466 nm OHL56 6) Seite 3 Dominante Wellenlänge 6) page 3 Dominant Wavelength true green, λ dom = f ( ); = 5 C λ dom 545 nm 535 OHL true green m I F m I F 9-
12 LRB G6SG Maximal zulässiger Durchlassstrom rot Max. Permissible Forward Current red = f (); chip on 8 m 7 OHL656 S Maximal zulässiger Durchlassstrom rot Max. Permissible Forward Current red = f (); 3 chips on 8 m 7 S OHL total maximum power dissipation of all 3chips has to be limited to <4 mw temp. ambient S temp. solder point C Maximal zulässiger Durchlassstrom true grün Max. Permissible Forward Current true green = f (); chip on 6 m 5 S OHL683 temp. ambient S temp. solder point C Maximal zulässiger Durchlassstrom true grün Max. Permissible Forward Current true green = f (); 3 chips on 6 m 5 S OHL total maximum power dissipation of all 3chips has to be limited to <4 mw temp. ambient S temp. solder point temp. ambient S temp. solder point C C 9-
13 LRB G6SG Maximal zulässiger Durchlassstrom blau Max. Permissible Forward Current blue = f (); chip on 6 m 5 S OHL683 Maximal zulässiger Durchlassstrom blau Max. Permissible Forward Current blue = f (); 3 chips on 6 m 5 S OHL temp. ambient S temp. solder point C total maximum power dissipation of all 3chips has to be limited to <4 mw temp. ambient S temp. solder point C 9-3
14 LRB G6SG Duty cycle parameter, = 5 C = f ( ); red ( Chip on) OHL79 Duty cycle parameter, = 85 C = f ( ); red ( Chip on) OHL Duty cycle parameter, = 5 C = f ( ); red (3 Chips on) s OHL Duty cycle parameter, = 85 C = f ( ); red (3 Chips on) s OHL D = - - s - - s 9-4
15 LRB G6SG Duty cycle parameter, = 5 C = f ( ); true green ( Chip on).35.3 OHL75 Duty cycle parameter, = 85 C = f ( ); true green ( Chip on).35.3 OHL Duty cycle parameter, = 5 C = f ( ); true green (3 Chips on) I F t P - s OHL734 Duty cycle parameter, = 85 C = f ( ); true green (3 Chips on) I F t P - s OHL s - - s 9-5
16 LRB G6SG Duty cycle parameter, = 5 C = f ( ); blue ( Chip on).35.3 OHL75 Duty cycle parameter, = 85 C = f ( ); blue ( Chip on).35.3 OHL Duty cycle parameter, = 5 C = f ( ); blue (3 Chips on) I F t P - s OHL734 Duty cycle parameter, = 85 C = f ( ); blue (3 Chips on) I F t P - s OHL s - - s 9-6
17 LRB G6SG 8) Seite 3 Maßzeichnung 8) page 3 Package Outlines 3.5 (.38) 3. (.).8 (.).6 (.) C C3 3 (.79).6 (.63)...5 (.6) C C (.6).8 (.) (.5 (.98)) 3.6 (.4) 3. (.6).9 (.35).4 (.6) Package marking C.7 (.8).5 (.).5 (.).3 (.).7 (.8).5 (.).6 (.4).4 (.6) C GPLY68 C Cathode Red (R) node Red (R) C Cathode rue Green () node rue Green () C3 Cathode Blue (B) 3 node Blue (B) Gewicht / pprox. weight: 8) Seite 3 Gurtung / Polarität und Lage Verpackungseinheit 8) page 3 Method of aping / Polarity and Orientation Packing.5 (.59) 4 (.57) (.79) 4 mg /Rolle, ø8 mm oder 4/Rolle, ø33 mm unit /reel, ø8 mm or 4/reel, ø33 mm.5 (.8) 3.5 (.38) 3.7 (.46) 5.5 (.7).75 (.69) (.47).5 (.59) C C3 C 8 (.35).3 (.) max. OHY4 9-7
18 LRB G6SG 8) 9) Seite 3 Empfohlenes Lötpaddesign Reflow 8) 9) page 3 Recommended Solder Pad Reflow Löten Soldering.8 (.3).8 (.3) Gehäusemarkierung Package marking Gehäusemarkierung Package marking C 4.7 (.85).4 (.55) 3 C3 C 6 mm per anode pad for improved heat dissipation.35 (.4).6 (.4).35 (.4) Lötstopplack Solder resist OHPY3 Empfohlenes Platinendesign für cluster mit 6-lead OPLED in Serienschaltung Recommended PCB-Design for cluster with 6-lead OPLED in Series Connection node node Cathode node 3 Cathode 3 Cathode OHPY
19 LRB G6SG Lötbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4 Reflow Lötprofil für bleifreies Löten Reflow Soldering Profile for lead free soldering (nach J-SD-D) (acc. to J-SD-D) 3 C 5 55 C 4 C 7 C Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile s min 3 s max OHL687 + C 6 C C 45 C ±5 C +5 C 35 C - C 5 s max Ramp Down 6 K/s (max) s max 5 Ramp Up 3 K/s (max) 5 C s 3 t 9-9
20 LRB G6SG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) Gurtverpackung ape and Reel OSRM Opto Semiconductors (6P) BCH NO: Batch Number Bar Code () LO NO: Lot Number Bar Code (X) PROD NO: Product Code (9D) D/C: Date Code (Q)QY: Product Quantity per Reel Bar Code Lxxx xxxx Bin: Bin Information Color Bin: Bin Information Color Product Name Bin3: Bin Information Color 3 RoHS Compliant ML (G) GROUP: emp S 45 C R Sample dditional EX R77 DEMY PCKVR: Packing ype Color Color Color 3 X-X-X+X-X-X+X-X-X Forward Voltage Group Wavelength Group Brightness Group OH343 W D P P F E W N 3. ±.5 P Label Direction of unreeling W Direction of unreeling Gurtvorlauf: Leader: Gurtende: railer: 4 mm 4 mm 6 mm 6 mm OHY34 ape dimensions in mm (inch) W P P P D E F ±. (.57 ±.4) 8 ±. (.35 ±.4) ±.5 (.79 ±.).5 +. ( ).75 ±. (.69 ±.4) 5.5 ±.5 (.7 ±.) Reel dimensions in mm (inch) W N min W W max 8 (7) (.47) 6 (.36).4 + ( ) 8.4 (.74) 33 (3) (.47) 6 (.36).4 + ( ) 8.4 (.74) 9-
21 _< C). _< _< C). _< (9D) D/C: 44 Bin: Q-- Bin3: ML emp S C R a Please check the HIC immidiately after bag opening. Discard if circles overrun. void metal contact. Do not eat. LRB G6SG rockenverpackung und Materialien Dry Packing Process and Materials OSRM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% % If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, 5% examine units, if necessary bake units WE (9D) D/C: 44 Bin: Q-- Bin3: ML emp S C R a CUION LEVEL If blank, see bar code label his bag contains MOISURE SENSIIVE OPO SEMICONDUCORS. Shelf life in sealed bag: 4 months at < 4 C and < 9% relative humidity (RH).. fter this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalenrocessing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at % RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > % when read at 3 C ± 5 C, or b) a or b is not met. 4. If baking is required, reference IPC/JEDEC J-SD3 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level Floor time > Year Moisture Level 4 Floor time 7 Hours Moisture Level Floor time Year Moisture Level 5 Floor time 48 Hours Moisture Level a Floor time 4 Weeks Moisture Level 5a Floor time 4 Hours Moisture Level 3 Floor time 68 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRM nm.: Note: Feuchteempfindliche Produkte sind verpackt in einem rockenbeutel zusammen mit einem rockenmittel und einer Feuchteindikatorkarte Bezüglich rockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt rockenverpackung. Hier sind Normenbezüge, unter anderem ein uszug der JEDEC-Norm, enthalten. Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter ape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien ransportation Packing and Materials OH539 Barcode label Barcode label CUION LEVEL his bag contains MOISURE SENSIIVE OPO SEMICONDUCORS. Shelf life in sealed bag: 4 months at < 4 C and < 9% relative humidity (RH).. fter this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalenrocessing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at % RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > % when read at 3 C ± 5 C, or b) a or b is not met. 4. If baking is required, reference IPC/JEDEC J-SD3 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level Floor time > Year Moisture Level 4 Floor time 7 Hours Moisture Level Floor time Year Moisture Level 5 Floor time 48 Hours Moisture Level a Floor time 4 Weeks Moisture Level 5a Floor time 4 Hours Moisture Level 3 Floor time 68 Hours Moisture Level 6 Floor time 6 Hours If blank, see bar code label OSRM Opto Semiconductors (6P) BCH NO: () LO NO: 998 3GH34 Muster (X) PROD NO: 45 (Q)QY: LSY 676 Multi OPLED Bin: P-- 4 C R 3 6 C R dditional EX R77 PCKVR: (G) GROUP: R8 DEMY P-+Q- OSRM Opto Semiconductors (6P) BCH NO: () LO NO: 998 3GH34 Muster (X) PROD NO: 45 (Q)QY: LSY 676 Multi OPLED Bin: P-- 4 C R 3 6 C R dditional EX R77 PCKVR: (G) GROUP: R8 DEMY P-+Q- OSRM Packing Sealing label OH44 9-
22 LRB G6SG Revision History: 9- Previous Version: Page Subjects (major changes since last revision) Date of change acc. to OS-PCN Relative Luminous Intensity 6 4 acc. to OS-PCN-6-6--B 6, 4, 7,8 new ordering code 7-8-8, 6, 7 new ordering codes 9- ttention please! he information describes the type of component and shall not be considered as assured characteristics. erms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components ) page 3 may only be used in life-support devices or systems ) page 3 with the express written approval of OSRM OS. 9-
23 LRB G6SG Fußnoten: ) Helligkeitswerte werden mit einer Stromeinprägedauer von 5 ms und einer Genauigkeit von ± % ermittelt. ) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 3) R thj ergibt sich bei Montage auf PC-Board FR 4 (Padgröße 6 mm je Pad) 4) Wellenlängen werden mit einer Stromeinprägedauer von 5 ms und einer Genauigkeit von ± nm ermittelt. 5) Spannungswerte werden mit einer Stromeinprägedauer von ms und einer Genauigkeit von ±, V ermittelt. 6) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere nkündigung geändert. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhältnis im Gleichstrom-Betrieb max. 5: für red 8) Maße werden wie folgt angegeben: mm (inch) 9) Gehäuse hält W-Löthitze aus nach CECC 8 ) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden pparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden pparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses pparates oder Systems beeinträchtigt. ) Lebenserhaltende pparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: ) Brightness groups are tested at a currenulse duration of 5 ms and a tolerance of ± %. ) Driving the LED in reverse direction is suitable for short term application. 3) R thj results from mounting on PC board FR 4 (pad size 6 mm per pad) 4) Wavelengths are tested at a currenulse duration of 5 ms and a tolerance of ± nm. 5) Forward voltages are tested at a currenulse duration of ms and a tolerance of ±. V. 6) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. hese do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5: for red 8) Dimensions are specified as follows: mm (inch) 9) Package able to withstand W-soldering heat acc. to CECC 8 ) critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. ) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRM Opto Semiconductors GmbH Wernerwerkstrasse, D-9349 Regensburg ll Rights Reserved. 9-3
Opto Semiconductors. Vorläufige Daten / Preliminary Data
CHIPLED Vorläufige Daten / Preliminary Data Besondere Merkmale SMT-Gehäusetyp: 63 Farben: grün (572 nm), gelb (59 nm) Abstrahlcharakteristik: extrem breit (16 ) Industriestandard bzgl. Lötpadraster geringe
MehrCHIPLED LG N971, LY N971
CHIPLED LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126 Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm Wellenlänge: 57 nm (grün), 587 nm (gelb) Abstrahlwinkel: Lambertscher
MehrCHIPLED LH R
CHIPLED LH R974 Besondere Merkmale Gehäusetyp: 0805 Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,25 mm x 0,8 mm Wellenlänge: 645 nm Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160
Mehr6-lead MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6TG
6-lead MULILED Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LRB G6G Vorläufige Daten nach OS-PCN-6-6--B / Preliminary Data acc. to OS-PCN-6-6--B Besondere Merkmale
Mehr6-lead MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LRTB G6TG
6-lead MULILED Enhanced optical Power LED (hinfilm / hingan ) Lead (Pb) Free Product - RoHS Compliant LRB G6G Vorläufige Daten nach OS-PCN-6-6--B / Preliminary Data acc. to OS-PCN-6-6--B Besondere Merkmale
Mehr5 mm (T1 ¾) LED, Diffused LR 5360, LS 5360, LY 5360, LG 5360
mm (1 ¾) LED, Diffused LR 36, LS 36, LY 36, LG 36 Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses mm (1 ¾) Gehäuse Besonderheit des Bauteils: Lötspieße mit Aufsetzebene Wellenlänge: 64 nm (rot),
MehrOpto Semiconductors. White LED
Hyper TOPLED White LED Vorläufige Daten / Preliminary Data Besondere Merkmale GaN-Technologie Farbe: weiß x =.3, y =.32 nach CIE1931 Abstrahlcharakteristik: Lambertscher Strahler (12 ) ESD-sicher bis 2
Mehr6-lead MULTILED - RGB - white binned Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6SF.
6-lead MULILED - RGB - white binned Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LRB G6SF Released Besondere Merkmale Gehäusetyp: weißes P-LCC-6 Gehäuse mit diffusem
MehrBLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED LB T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
Mehr6-lead MULTILED Enhanced optical Power LED (HOP2000 / ATON ) Lead (Pb) Free Product - RoHS Compliant LATB G66B. Besondere Merkmale.
6-lead MULILED Enhanced optical Power LED (HOP / ON ) Lead (Pb) Free Product - RoHS Compliant LB G66B Besondere Merkmale Gehäusetyp: weißes P-LCC-6 Gehäuse, Kontrasterhöhung durch schwarze Oberfläche (RGB-Displays)
MehrHyper Multi TOPLED Enhanced optical Power LED (HOP2000 / ATON ) Lead (Pb) Free Product - RoHS Compliant LATB T66B. Vorläufige Daten / Preliminary Data
Hyper Multi OPLED Enhanced optical Power LED (HOP / ON ) Lead (Pb) Free Product - RoHS Compliant LB 66B Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse; Kontrasterhöhung
Mehr3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 LY 3360, LG 3360, LP 3360
3 mm (T1) LED, Diffused LR 3360, LS 3360, LO 3360 Besondere Merkmale eingefärbtes, diffuses Gehäuse als optischer Indikator einsetzbar Lötspieße mit Aufsetzebene gegurtet lieferbar Störimpulsfest nach
Mehr6-lead MULTILED Enhanced optical Power LED (HOP2000 / ATON ) LATB G66B
6-lead MULILED Enhanced optical Power LED (HOP / ON ) LB G66B Non-RoHS compliant version of product will be discontinued acc. to OS-PD. he product itself will remain within RoHS compliant version. Besondere
MehrHyper Multi TOPLED Enhanced optical Power LED (HOP2000 / ATON ) LATB T66B
Hyper Multi OPLED Enhanced optical Power LED (HOP / ON ) LB 66B Non-RoHS compliant version of product will be discontinued acc. to OS-PD-5-5. he product itself will remain within RoHS compliant version.
MehrHyper Multi TOPLED Enhanced optical Power LED (HOP2000 / ATON ) Lead (Pb) Free Product - RoHS Compliant LATB T66B
Hyper Multi OPLED Enhanced optical Power LED (HOP / ON ) Lead (Pb) Free Product - RoHS Compliant LB 66B bkündigung nach OS-PD--6 Obsolete acc. to OS-PD--6 Besondere Merkmale Gehäusetyp: weißes P-LCC-4
MehrHyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 080 Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,2 mm x 0,8 mm Wellenlänge: 633 nm (super-rot), 606
MehrHyper Micro SIDELED Hyper-Bright LED LS Y876, LA Y876, LO Y876, LY Y876. Vorläufige Daten / Preliminary Data
Hyper Micro SIDELED Hyper-Bright LED LS Y876, L Y876, LO Y876, LY Y876 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SM-Gehäuse Besonderheit des Bauteils: kleine Bauform mit
MehrLC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269. Nicht für Neuentwicklungen / Not for New Designs
LC SOT-23 LED, Diffused Low Current LED LS S269, LY S269, LG S269 Nicht für Neuentwicklungen / Not for New Designs Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses SOT-23 Gehäuse Besonderheit des
MehrHyper TOPLED White LED LW T676. Vorläufige Daten / Preliminary Data
Hyper TOPLED White LED LW T676 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LH R974
CHIPLED Lead (Pb) Free Product - RoHS Compliant LH R974 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 2, mm x 1,25 mm x,8 mm Wellenlänge:
MehrTOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770
TOPLED RG LS T770, LO T770, LY T770, LG T770, LP T770 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: Bauteil wird top-down montiert und strahlt durch das PCB, deshalb ideal
MehrSFH Features Especially suitable for applications from 740 nm to 1100 nm 5 mm LED plastic package Integrated NTC thermistor, R 25 =10kΩ
Silizium-PIN-Fotodiode mit integriertem Temperatur-Sensor Silicon PIN Photodiode with integrated Temperature Sensor Lead (Pb) Free Product - RoHS Compliant SFH 54 Wesentliche Merkmale Speziell geeignet
Mehr650nm Resonant Cavity LED-Chip 650nm Resonant Cavity LED Die F372A. Vorläufige Daten / Preliminary Data
65nm Resonant Cavity LED-Chip 65nm Resonant Cavity LED Die F372A Vorläufige Daten / Preliminary Data Besondere Merkmale keine Schwelle hohe Leistung Kurze Schaltzeiten: 15ns Oberflächenstrahler Optimale
MehrMulti CHIPLED Lead (Pb) Free Product - RoHS Compliant LATB R98G. Abkündigung nach OS-PD Obsolete acc. to OS-PD Besondere Merkmale
Multi CHIPLED Lead (Pb) Free Product - RoHS Compliant LAB R98G Abkündigung nach OS-PD-9- Obsolete acc. to OS-PD-9- Besondere Merkmale Gehäusetyp: schwarzes SM-Gehäuse, Kontrasterhöhung durch schwarze Oberfläche
MehrSFH Not for new design
GaAlAs-IR-Lumineszenzdiode (88 nm) und grüne GaP-LED (6 nm) GaAlAs-Infrared-Emitter (88 nm) and GaP-LED (6 nm) Lead (Pb) Free Product - RoHS Compliant SFH 7222 Not for new design Wesentliche Merkmale SM-Gehäuse
MehrSchmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 5441
Schmitt-Trigger IC im Smart DIL Gehäuse Schmitt-Trigger IC in Smart DIL Package Lead (Pb) Free Product - RoHS Compliant SFH 5440 SFH 544 Wesentliche Merkmale SFH 5440: Ausgang active low SFH 544: Ausgang
MehrSOCKET AND RING Lead (Pb) Free Product - RoHS Compliant. Sleeves and Ring for 3 mm and 5 mm LED. full production
2006-06-12 SOCKET AND RING Lead (Pb) Free Product - RoHS Compliant Sleeves and Ring for 3 mm and 5 mm LED full production Applications Signal lamp for front panel installation using clip mounting and a
MehrMULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRT GFTM. Released. Besondere Merkmale.
MULILED Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LR GFM Released Besondere Merkmale Gehäusetyp: weißes PLCC-6 Gehäuse, Kontrasterhöhung durch schwarze Oberfläche
MehrHyper CHIPLED Hyper-Bright LED LB Q993
Hyper CHIPLED Hyper-Bright LED LB Q993 Abgekündigt nach OS-PD-23-7 - wird durch LB L293 ersetzt werden Obsolete acc. to OS-PD-23-7 - will be replaced by LB L293 Besondere Merkmale Gehäusetyp: SMT Gehäuse
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LATB T66C. Abkündigung nach OS-PD Obsolete acc.
Hyper Multi OPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LAB 66C Abkündigung nach OS-PD-2-6 Obsolete acc. to OS-PD-2-6 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse; Kontrasterhöhung
MehrTOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674
TOPLED Super-Bright, Hyper-Red GaAlAs-LED LH T674 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
MehrHyper Multi TOPLED RG Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LOG T77K
Hyper Multi OPLED RG Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LOG 77K Besondere Merkmale Gehäusetyp: weißes SM Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: 2
MehrLeistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 4209
Leistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter SFH 429 Wesentliche Merkmale Leistungsstarke GaAs-LED (4mW) Hoher Wirkunsgrad bei kleinen Strömen Typische Peakwellenlänge 95nm Anwendungen
MehrMini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670
Mini TOPLED LS M670, LO M670, LY M670, LG M670, LP M670 Besondere Merkmale Gehäusetyp: weißes SMT-Gehäuse Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm Wellenlänge: 628 nm (super-rot),
MehrLeistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter Lead (Pb) Free Product - RoHS Compliant SFH 4203
Leistungsstarke IR-Lumineszenzdiode High Power Infrared Emitter Lead (Pb) Free Product - RoHS Compliant SFH 423 Nicht für Neuentwicklungen / Not for new designs Wesentliche Merkmale Leistungsstarke GaAs-LED
MehrHyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS Q976, LO Q976, LY Q976
Hyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS Q976, LO Q976, LY Q976 Besondere Merkmale Gehäusetyp: 63, farbloser diffuser Verguss Besonderheit des Bauteils: kleinste Bauform
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrHyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676
Hyper Multi TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LSG T676 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips
MehrMulti TOPLED Enhanced Optical Power LED Lead (Pb) Free Product - RoHS Compliant LSY T67B
Multi OPLED Enhanced Optical Power LED Lead (Pb) Free Product - RoHS Compliant LSY 67B Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: mehr Licht
MehrHyper CHIPLED Hyper-Bright LED LW Q183. Vorläufige Daten / Preliminary Data
Hyper CHIPLED Hyper-Bright LED LW Q183 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SM Gehäuse 63 Besonderheit des Bauteils: kleinste Bauform 1,6x,8x,6mm(LxBxH) Farbort: x =,31, y
MehrMicro SIDELED Enhanced optical Power LED (ATON ) LW Y87C. Vorläufige Daten Preliminary Data
Micro SIDELED Enhanced optical Power LED (AON ) LW Y87C Vorläufige Daten Preliminary Data Besondere Merkmale Gehäusetyp: weißes SM Gehäuse Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik;
MehrGPL Maβe in mm, wenn nicht anders angegeben/dimensions in mm, unless otherwise specified.
SM Multi OPLED SFH 722 orläufige Daten / Preliminary Data 3. 2.6 2.3 2..8.6 2 3 2..7.9.7 C C. typ 3.4 3. E (2.4) 3.7 3.3 Package marking 4..5.8.2.6.4 GPL6965 Maβe in mm, wenn nicht anders angegeben/dimensions
Mehr6-lead MULTILED - RGB - white binned Enhanced optical Power LED (ThinFilm / ThinGaN ) Lead (Pb) Free Product - RoHS Compliant LRTB G6SF
6-lead MULLED - RGB - white binned Enhanced optical Power LED (hinfilm / hingan ) Lead (Pb) Free Product - RoHS Compliant LRB G6SF Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes
MehrTOPLED High-optical Power LED (HOP) LS T675. Vorläufige Daten / Preliminary Data
TOPLED High-optical Power LED (HOP) LS T675 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad
MehrMulti CERAMOS Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB C9TP Released Besondere Merkmale Features
Multi CERAMOS Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LRB C9P Released Besondere Merkmale Gehäusetyp: Keramik Gehäuse für RGB-Anzeigen mit diffusem Silikon
MehrSchmitt-Trigger IC im TO-18 Gehäuse mit Glaslinse Schmitt-Trigger IC in TO-18 Package with Glass Lens Lead (Pb) Free Product - RoHS Compliant
Schmitt-Trigger IC im TO-8 Gehäuse mit Glaslinse Schmitt-Trigger IC in TO-8 Package with Glass Lens Lead (Pb) Free Product - RoHS Compliant SFH 5840 SFH 584 Wesentliche Merkmale SFH 5840: Ausgang active
MehrHyper Micro SIDELED Hyper-Bright LED LB Y87S, LT Y87S
Hyper Micro SIDELED Hyper-Bright LED LB Y87S, L Y87S Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. he product itself will remain within RoHS compliant version. Besondere
MehrInfrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281
Infrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281 Wesentliche Merkmale Emissionswellenlänge 88 nm Homogene Abstrahlcharakteristik Anwendungen Miniaturlichtschranken für Gleich-
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971
CHIPLED Lead (Pb) Free Product - RoHS Compliant LG N971, LY N971 Besondere Merkmale Gehäusetyp: 126, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm
MehrStrahlstärkegruppierung 1) (I F = 100 ma, t p = 20 ms) Radiant Intensity Grouping 1) I e (mw/sr)
Infrarot-LED mit hoher Ausgangsleistung High Power Infrared LED Lead (Pb) Free Product - RoHS Compliant SFH 4 preliminary data / vorläufige Daten Wesentliche Merkmale Infrarot LED mit hoher Ausgangsleistung
MehrSilizium-Fotodiode Silicon Photodiode BPW 33
Silizium-Fotodiode Silicon Photodiode BPW 33 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 35 nm bis 11 nm Sperrstromarm (typ. 2 pa) DIL-Plastikbauform mit hoher Packungsdichte
MehrSilicon Photodiode for the Visible Spectral Range Silicon Photodiode for the Visible Spectral Range Lead (Pb) Free Product - RoHS Compliant BPW 21
Silicon Photodiode for the Visible Spectral Range Silicon Photodiode for the Visible Spectral Range Lead (Pb) Free Product - RoHS Compliant BPW 21 Wesentliche Merkmale Speziell geeignet für Anwendungen
MehrSmartLED 0603 White Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW L283
SmartLED 63 White Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LW L283 Besondere Merkmale Gehäusetyp: SM Gehäuse 63, farbiger diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,7
MehrMulti CHIPLED Lead (Pb) Free Product - RoHS Compliant LRTB R98G. Released
Multi CHIPLED Lead (Pb) Free Product - RoHS Compliant LRB R98G Released Besondere Merkmale Gehäusetyp: schwarzes SM-Gehäuse, Kontrasterhöhung durch schwarze Oberfläche (RGB-Displays) und diffuses Harz
MehrCHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971. Released
CHIPLED Lead (Pb) Free Product - RoHS Compliant LS Q971, LO Q971, LY Q971, LG Q971 Released Besondere Merkmale Gehäusetyp: 63, farbloser diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,6
MehrMulti SIDELED Bright Green Die Lead (Pb) Free Product - RoHS Compliant LSG A671. Nicht für Neuentwicklungen Not for new designs
Multi SIDELED Bright Green Die Lead (Pb) Free Product - RoHS Compliant LSG A671 Nicht für Neuentwicklungen Not for new designs Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss
MehrGaAlAs-Lumineszenzdiode (660 nm) GaAlAs Light Emitting Diode (660 nm) SFH 4860
GaAlAs-Lumineszenzdiode (66 nm) GaAlAs Light Emitting Diode (66 nm) SFH 486 Wesentliche Merkmale Hergestellt im Schmezepitaxieverfahren Kathode galvanisch mit dem Gehäuseboden verbunden Hohe Zuverlässigkeit
MehrMulti TOPLED Cathodes On One Side Lead (Pb) Free Product - RoHS Compliant LSG T677
Multi TOPLED Cathodes On One Side Lead (Pb) Free Product - RoHS Compliant LSG T677 LSG T677 abgekündigt nach OS-PD-26-9 - wird durch LSG T676 ersetzt werden. LSG T677 obsolete acc. to OS-PD-26-9 - will
MehrHyper Mini TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB M673, LT M673
Hyper Mini OPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB M673, L M673 Vorläufige Daten für OS-PCN-26-24-A/ Preliminary Data for OS-PCN-26-24-A Besondere Merkmale Gehäusetyp: weißes
MehrAdvanced Power TOPLED Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LA G67F
dvanced Power OPLED Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant L G67F L_G67F abgekündigt nach OS-PD-26-9 - wird durch L_G6SP ersetzt werden. L_G67F obsolete acc. to OS-PD-26-9 - will
MehrHyper SIDELED Enhanced Optical Power LED (ATON ) LB A67C, LT A67C
Hyper SIDELED Enhanced Optical Power LED (AON ) LB A67C, L A67C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. he product itself will remain within RoHS compliant version.
MehrSilizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21
Silizium-Fotodiode für den sichtbaren Spektralbereich Silicon Photodiode for the Visible Spectral Range BPW 21 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 350 nm bis 820 nm Angepaßt
MehrMini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870
Mini SIDELED LS C870, LO C870, LY C870, LG C870, LP C870 Nicht für Neuentwicklungen - wird durch Micro SIDELED ersetzt werden Not for new designs - will be replaced by Micro SIDELED Besondere Merkmale
MehrHyper SIDELED Hyper-Bright LED LB A673, LT A673
Hyper SIDELED Hyper-Bright LED LB A673, L A673 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-25-5. he product itself will remain within RoHS compliant version. Besondere Merkmale
MehrHyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976
Hyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS R976, LO R976, LY R976 Besondere Merkmale Gehäusetyp: 85, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform
MehrIR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4556
IR-Lumineszenzdiode (8 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (8 nm) Lead (Pb) Free Product - RoHS Compliant SFH 46 Wesentliche Merkmale Infrarot LED mit hoher Ausgangsleistung Kurze
MehrPower TOPLED Hyper-Bright LED LY E675
Power TOPLED Hyper-Bright LED LY E675 Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad; höhere Umgebungstemperatur bei gleichem
Mehr5 mm (T1 3 / 4 ) MULTILED, Diffused LU 5351
5 mm (T1 3 / 4 ) MULTILED, Diffused LU 5351 Besondere Merkmale nicht eingefärbtes, teilweise diffuses Gehäuse Lötspieße im 2.54 mm Raster hohe Signalwirkung durch Farbwechsel der LED möglich Anzeige unterschiedlicher
MehrHyper TOPLED RG Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T773, LT T773
Hyper OPLED RG Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB 773, L 773 Vorläufige Daten für OS-PCN-26-24-A/ Preliminary Data for OS-PCN-26-24-A Besondere Merkmale Gehäusetyp: weißes SM Gehäuse,
MehrPower TOPLED Enhanced optical Power LED (ATON ) LB E67C, LV E67C, LT E67C. Vorläufige Daten / Preliminary Data
Power OPLED Enhanced optical Power LED (AON ) LB E67C, LV E67C, L E67C Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse Besonderheit des Bauteils: mehr Licht durch
MehrInfrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281
Infrarot-LED Infrared-LED Lead (Pb) Free Product - RoHS Compliant SFH 4281 Not for new design Replacement: SFH4253 R Wesentliche Merkmale Emissionswellenlänge 88 nm Homogene Abstrahlcharakteristik Anwendungen
MehrHyper TOPLED Enhanced optical Power LED (ATON ) LB T68C, LT T68C
Hyper OPLED Enhanced optical Power LED (AON ) LB 68C, L 68C Non-RoHS compliant version of product will be discontinued acc. to OS-PD-5-5. he product itself will remain within RoHS compliant version. Besondere
MehrHyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T673, LT T673. Released
Hyper OPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB 673, L 673 Released Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: extrem
MehrUV-Lumineszensdiode UV Light Emitting Diode SFH Vorläufige Daten / Preliminary Data
UV-Lumineszensdiode UV Light Emitting Diode SFH 484 Vorläufige Daten / Preliminary Data Wesentliche Merkmale UV-LED mit Emissionswellenlänge 395nm Enger Abstrahlwinkel Hermetisch dichtes Gehäuse ESD-Festigkeit
MehrGaAs-IR-Lumineszenzdiode (Mini Sidelooker) GaAs Infrared Emitter (Mini Sidelooker) Lead (Pb) Free Product - RoHS Compliant SFH 4110
GaAs-IR-Lumineszenzdiode (Mini Sidelooker) GaAs Infrared Emitter (Mini Sidelooker) Lead (Pb) Free Product - RoHS Compliant SFH 41 Wesentliche Merkmale Wellenlänge der Strahlung 95 nm Enger Abstrahlwinkel
MehrCathode GEX Cathode GEX06305
GaAIAs-IR-Lumineszenzdioden (88 nm) GaAIAs Infrared Emitters (88 nm) 484 Area not flat 2.54 mm spacing 2.54 mm spacing.6.4.6.4.8.2 29 27.5.8.5 29 27 Area not flat.8.5 9. 8.2 7.8 7.5 5.7 5. 9. 8.2 7.8 7.5
MehrMulti TOPLED LSG T670, LSP T670, LSY T670 LOP T670, LYG T670, LYP T670
Multi TOPLED LSG T670, LSP T670, LSY T670 LOP T670, LYG T670, LYP T670 Besondere Merkmale Gehäusebauform: P-LCC-4 Gehäusefarbe: weiß als optischer Indikator einsetzbar zur Hinterleuchtung, Lichtleiter-
MehrDatasheetDirect.com. Visit to get your free datasheets. This datasheet has been downloaded by
DatasheetDirect.com Your dedicated source for free downloadable datasheets. Over one million datasheets Optimized search function Rapid quote option Free unlimited downloads Visit www.datasheetdirect.com
MehrSilizium-PIN-Fotodiode Silicon PIN Photodiode BPX 61
Silizium-PIN-Fotodiode Silicon PIN Photodiode BPX 61 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 4 nm bis 1 nm Kurze Schaltzeit (typ. 2 ns) Hermetisch dichte Metallbauform (ähnlich
MehrSilizium-PIN-Fotodiode; in SMT und als Reverse Gullwing Silicon PIN Photodiode; in SMT and as Reverse Gullwing BPW34, BPW34S, BPW34S (R18R)
Silizium-PIN-Fotodiode; in SMT und als Reverse Gullwing Silicon PIN Photodiode; in SMT and as Reverse Gullwing BPW34, BPW34S, BPW34S (R18R) BPW 34 BPW 34 S Wesentliche Merkmale Speziell geeignet für Anwendungen
MehrSuper SIDELED High-Current LED LG A672, LP A672
Super SIDELED High-Current LED LG A672, LP A672 Abgekündigt nach PD_78_2 - werden durch LG A676 und LP A676 ersetzt werden Obsolete acc. to PD_78_2 - will be replaced by LG A676 and LP A676 Besondere Merkmale
MehrFIREFLY 0402 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F. Vorläufige Daten / Preliminary Data
FIREFLY 42 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LA VH9F, LR VH9F Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMT Gehäuse, Standard SMT Footprint 42, farbloser
MehrReflector Lead (Pb) Free Product - RoHS Compliant. Reflector for 3 mm and 5 mm LED (silver) full production
2006-06-12 Reflector Lead (Pb) Free Product - RoHS Compliant Reflector for 3 mm and 5 mm LED (silver) full production Features: Besondere Merkmale: Package: reflector for 3 mm and 5 mm LED, Gehäusetyp:
MehrHyper TOPLED Enhanced optical Power LED (ATON ) LB T68C, LT T68C
Hyper OPLED Enhanced optical Power LED (AON ) LB 68C, L 68C Besondere Merkmale Gehäusetyp: weißes P-LCC- Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Kontrasterhöhung durch schwarze Oberfläche
MehrMulti TOPLED Bright Green Die LOG T671, LSG T671
Multi TOPLED Bright Green Die LOG T671, LSG T671 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-2-. The product itself will remain within RoHS compliant version. Besondere Merkmale
Mehr3 mm (T1) MULTILED, Non Diffused LSG 3331
3 mm (T1) MULTILED, Non Diffused LSG 3331 Besondere Merkmale Gehäusetyp: nicht eingefärbtes, klares 3 mm (T1) Gehäuse Besonderheit des Bauteils: antiparallel geschaltete Chips; Lötspieße mit Aufsetzebene
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter LD 274-3
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter LD 274 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Gute spektrale Anpassung an Si-Fotoempfänger Gehäusegleich mit SFH 484
MehrGaAs-IR-Lumineszenzdiode GaAs Infrared Emitter SFH 409
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter SFH 49 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Hohe Impulsbelastbarkeit Gute spektrale Anpassung an Si-Fotoempfänger
MehrMulti TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T77K. Released. Besondere Merkmale. Features
Multi OPLED RG Lead (Pb) Free Product - RoHS Compliant LSG 77K Released Besondere Merkmale Gehäusetyp: weißes SM Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: 2 Leuchtdiodenchips getrennt
MehrLC 5 mm (T1 ¾) LED, Diffused Low Current LED LS 5469, LY 5469, LG 5469
LC mm (T1 ¾) LED, Diffused Low Current LED LS 469, LY 469, LG 469 Besondere Merkmale Gehäusetyp: eingefärbtes, diffuses mm (T1 ¾) Gehäuse Besonderheit des Bauteils: hohe Lichtstärke bei kleinen Strömen;
MehrSilizium-PIN-Fotodiode mit sehr kurzer Schaltzeit Silicon PIN Photodiode with Very Short Switching Time SFH 229 SFH 229 FA
Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit Silicon PIN Photodiode with Very Short Switching Time Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 380 nm bis 1100 nm () und bei
MehrSmartLED Hyper-Bright LED LS L896, LA L896, LO L896, LY L896
SmartLED Hyper-Bright LED LS L896, LA L896, LO L896, LY L896 Besondere Merkmale Gehäusetyp: SM Gehäuse SCD 8, farbloser diffuser Verguss Besonderheit des Bauteils: kleinste Bauform 1,7 mm x,8 mm x,65 mm
MehrMulti TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T770. Abkündigung nach OS-PD Obsolete acc. to OS-PD
Multi TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T77 Abkündigung nach OS-PD-21-24 Obsolete acc. to OS-PD-21-24 Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit
MehrSilizium-PIN-Fotodiode Silicon PIN Photodiode SFH 206 K
Silizium-PIN-Fotodiode Silicon PIN Photodiode SFH 26 K Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 4 nm bis 11 nm Kurze Schaltzeit (typ. 2 ns) 5-mm-Plastikbauform im LED-Gehäuse
MehrHyper Mini TOPLED Hyper-Bright LED LB M673, LV M673, LT M673. Vorläufige Daten / Preliminary Data
Hyper Mini TOPLED Hyper-Bright LED LB M673, LV M673, LT M673 Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse Besonderheit des Bauteils: kleine Bauform für Anwendungen
MehrHyper 3 mm (T1) LED, micro Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB 3333, LT 3333
Hyper 3 mm (1) LED, micro Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB 3333, L 3333 Vorläufige Daten für OS-PCN-25-3-A / Preliminary Data for OS-PCN-25-3-A Besondere Merkmale Gehäusetyp:
MehrMulti TOPLED RG Lead (Pb) Free Product - RoHS Compliant LSG T77K. Released. Besondere Merkmale. Features
Multi OPLED RG Lead (Pb) Free Product - RoHS Compliant LSG 77K Released Besondere Merkmale Gehäusetyp: weißes SM Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: 2 Leuchtdiodenchips getrennt
MehrMULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LTRB GFSF. Released. Besondere Merkmale.
MULILED Enhanced optical Power LED (hinfilm / hingan) Lead (Pb) Free Product - RoHS Compliant LRB GFSF Released Besondere Merkmale Gehäusetyp: weißes PLCC-6 Gehäuse mit diffusem Silikon-Verguss Besonderheit
MehrTOPLED LS T670, LO T670, LY T670, LG T670, LP T670
TOPLED LS T670, LO T670, LY T670, LG T670, LP T670 Besondere Merkmale Gehäusetyp: weißes P-LCC-2-Gehäuse Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal für Hinterleuchtungen und
Mehr