Für KDS II / KDS 3D-Geräte For KDS II / KDS 3D-Devices
|
|
- Carl Melsbach
- vor 6 Jahren
- Abrufe
Transkript
1 Fahrwerkvermessung Wheel Alignment Für KDS II / KDS 3D-Geräte For KDS II / KDS 3D-Devices de System-Software- und Solldaten-Installation Achsmessgerät en System-software- and Target data-insatllation Wheel Alignment System
2 de 2 KDS II / KDS 3D-Geräte
3 KDS II / KDS 3D-Geräte 3 de Inhaltsverzeichnis Deutsch Contents English
4 de 4 KDS II / KDS 3D-Geräte Inhaltsverzeichnis 1. Voraussetzung Dongle Anmeldung Programme Installationssoftware Installationslizenz Installationsmedium 5 2. System Software CD/ DVD Achsmessgerätehersteller Fahrzeughersteller Download Installationsprogramm 7 3. Solldaten CD/ DVD Achsmessgerätehersteller Fahrzeughersteller Download Installationsprogramm 8
5 Voraussetzung KDS II / KDS 3D-Geräte 5 de 1. Voraussetzung 1.1 Dongle 1.3 Programme Vor der Installation alle laufenden Programme beenden: 1. Das Achsmessprogramm beenden. 2. In der Taskleiste die Programmsymbole für ILSV-, Licence-, Demo-, CCD- oder Easy3D-Server und IR- Fernbedienung mit der rechten Maustaste anwählen und im Menü mit "Exit" beenden. 1.4 Installationssoftware Die Installationssoftware für Achsmessgeräte (Neuinstallation und Update) besteht aus: Fig. 1: Dongle (Schnittstelle LPT) System-Software (= Achsmessprogramm) Solldaten-Software Fig. 2: Dongle (Schnittstelle USB) 1.5 Installationslizenz!! Für die Installation ist neben der Hardware-Lizenz (Dongle) eine Software-Lizenz zwingend erforderlich. Überprüfen ob der Dongle an der entsprechenden Schnittstelle (LPT oder USB) des PC angesteckt ist.!! Dongle: Der Dongle enthält die Hardware-Lizenz des Achsmessgeräts. Jedes Gerät hat seine eigene Lizenz. Die Lizenz ist für die Software-Installation und den Betrieb des Geräts zwingend notwendig. 1.2 Anmeldung 1. Achsmessgerät an das Stromnetz anschließen. 2. Gerät am Hauptschalter einschalten. 3. Der Rechner bootet. 4. Wenn das Betriebssystem ein Anmeldefenster anzeigt, muss die Anmeldung mit dem Benutzerkonto "BBService" (Passwort: admin) oder "dguser" (ohne Passwort) erfolgen. 5. Das Achsmessprogramm wird automatisch gestartet (falls die Software bereits installiert worden ist). iianmeldung: Je nach Version des Achsmessgeräts startet das Betriebssystem mit oder ohne Anmeldung: $ $ Startet das Betriebssystem ohne Anmeldung, wird automatisch das Benutzerkonto mit Administratorrechte verwendet. $ $ Startet das System mit Anmeldung, muss manuell ein Konto mit Administratorrechten ("BBService" oder "dguser") gewählt werden.!! Zur Software-Installation sind Administratorrechte zwingend erforderlich. Die Software-Lizenz wird für System- und Solldaten benötigt. Die Lizenz kann verwendet werden für: Einzelnes Softwarepaket (System oder Solldaten) Kombiniertes Paket (System und Solldaten) Die Lizenz kann ausgeführt sein als: Einzellizenz (ein Achsmessgerät) Sammellizenz (mehrere Achsmessgeräte, z.b. Fahrzeughersteller) iibei Installation für Fahrzeughersteller ist die Sammellizenz meist im System- und Solldatensoftwarepaket enthalten. 1.6 Installationsmedium Die Installationssoftware und -Lizenz ist (abhängig von der Version des Achsmessgeräts) auf verschiedene Medien verfügbar: CD/ DVD (Achsmessgerätehersteller) CD/ DVD (Fahrzeughersteller) Diskette (nur Software-Lizenz) Download Internet (Achsmessgerätehersteller) Download Netzwerk (Fahrzeughersteller) iidownload Internet: $ $ Adresse: $ $ Software-Center anwählen (siehe auch Anleitung SoftwareCenter). iidownload Netzwerk: siehe Info Fahrzeughersteller.
6 de 6 KDS II / KDS 3D-Geräte System Software 2. System Software 2.1 CD/ DVD Achsmessgerätehersteller 1. Die System-Software CD/ DVD in das Laufwerk des Rechners legen. Das Auswahlmenü der CD/ DVD startet automatisch. iiwenn das Menü nicht automatisch startet, dann im Explorer die Datei AutoRunExec.exe auf dem Root-Verzeichnis der CD/ DVD aufrufen. 2.2 Download 1. Die aus dem Internet oder Firmennetzwerk heruntergeladene Datei (Installation und/ oder Lizenz) auf ein Speichermedium (z.b. USB-Stick) kopieren. 2. Speichermedium am Achmessgeräterechner anschließen. 3. Im Explorer die Installationsdatei auf dem Medium anwählen. 4. Das Installationsprogramm wird entpackt. Fig. 3: Button "Setup + Update" im Auswahlmenü 2. Im Menü den Button Setup + Update anwählen. 3. Das Installationsprogramm startet. iidie Installationsanleitung wird über den Button Anleitung geöffnet Fahrzeughersteller 1. Die CD/ DVD in das Laufwerk des Rechners legen. Die CD/ DVD startet gemäß den Vorgaben des Herstellers. 2. Im Auswahlmenü das Installationsprogramm oder im Explorer die Installationsdatei anwählen. 3. Das Installationsprogramm wird entpackt. Fig. 5: Entpacken des Installationsprogramms 5. Das Installationsprogramm startet. Fig. 4: Entpacken des Installationsprogramms 4. Das Installationsprogramm startet.
7 System Software KDS II / KDS 3D-Geräte 7 de 2.3 Installationsprogramm iidas Programm führt menügesteuert durch die Installation. Fig. 8: Abfrage Software-Lizenz 3. Das Abfragefenster für die Software-Lizenz wird angezeigt. Den Button "Durchsuchen" anklicken und im Explorerfenster das Laufwerk und die Lizenzdatei (Endung:.lic) auswählen. iies besteht auch die Möglichkeit den Lizenzschlüssel als Code direkt einzugeben. iibei einem Softwarepaket mit Sammellizenz wird das Abfragefenster Software-Lizenz nicht aufgerufen. Fig. 6: Begrüßungsfenster Installation Systemsoftware 4. Nach Abschluss des Installationsvorgangs muss der Rechner neu gestartet werden. 1. Button "Weiter" anwählen. iieventuell im Rechner befindliche Lizenzdiskette vor dem Neustart entfernen. i i Nach der Installation befindet sich im Menü "Alle Programme" ein Eintrag und auf dem Desktop ein Ordner für das Achsmessprogramm. Die Software ist auch in den Autostart-Ordner verlinkt worden und startet nach dem Booten des Rechners automatisch. Fig. 7: Startfenster Installation Systemsoftware 2. Button "Weiter" anwählen.
8 de 8 KDS II / KDS 3D-Geräte Solldaten 3. Solldaten 3.1 CD/ DVD Achsmessgerätehersteller 1. Die Solldaten-Software CD/ DVD in das Laufwerk des Rechners legen. Das Auswahlmenü der CD/ DVD startet automatisch. iiwenn das Menü nicht automatisch startet, dann im Explorer die Datei AutoRunExec.exe auf dem Root-Verzeichnis der CD/ DVD aufrufen. Fig. 9: Button "Setup + Update" im Auswahlmenü 2. Im Menü den Button Setup + Update anwählen. 3. Das Installationsprogramm startet. 3.2 Download 1. Die aus dem Internet oder Firmennetzwerk heruntergeladene Datei (Installation und/ oder Lizenz) auf ein Speichermedium (z.b. USB-Stick) kopieren. 2. Speichermedium am Achmessgeräterechner anschließen. 3. Im Explorer die Installationsdatei auf dem Medium anwählen. 4. Das Installationsprogramm wird entpackt. iientpacken siehe CD/ DVD Fahrzeughersteller. 5. Das Installationsprogramm startet. 3.3 Installationsprogramm iidas Programmmenü führt durch die Installation. iidie Installationsanleitung wird über den Button Anleitung geöffnet Fahrzeughersteller 1. Die CD/ DVD in das Laufwerk des Rechners legen. Die CD/ DVD startet gemäß den Vorgaben des Herstellers. 2. Im Auswahlmenü das Installationsprogramm oder im Explorer die Installationsdatei anwählen. 3. Das Installationsprogramm wird entpackt. Fig. 11: Begrüßungsfenster Installation Solldatensoftware 1. Button "Weiter" anwählen. Fig. 10: Entpacken des Installationsprogramms 4. Das Installationsprogramm startet. Fig. 12: Startfenster Installation Solldatensoftware 2. Button "Weiter" anwählen.
9 Solldaten KDS II / KDS 3D-Geräte 9 de 5. Das Installationsprogramm vergleicht alle auf der Solldaten CD/ DVD oder der Downloaddatei enthaltenen Solldatensätze mit den Einträgen in der Software-Lizenz. Bei Übereinstimmung (= Gültige Lizenz) wird der entsprechende Solldatensatz installiert. Fig. 13: Abfrage neue Lizenzdatei für Erstinstallation oder Update 3. Das Abfragefenster für die Software-Lizenz erscheint: $ $ Button Ja (Erstinstallation oder Update) anklicken: Im angezeigten Explorerfenster das Laufwerk und die Lizenzdatei (Endung:.lic) auswählen. $ $ Button "Nein" (vorhandene Installation erneut durchführen) anklicken: Das Installationsprogramm sucht nach einer bereits vorhandenen Softwarelizenz auf dem Achsmessrechner und führt nach Vorgabe dieser Lizenz eine Solldateninstallation durch. iidas Installationsprotokoll gibt Auskunft über: $ $ Seriennummer des Achsmessgeräts. $ $ Installationsart (Neuinstallation/ Update). $ $ Beginn und Endzeitpunkt der Installation. $ $ Installationsstatus jedes einzelnen Solldatensatzes. iiinstallationsstatus: $ $ Findet das Installationsprogramm eine gültige Lizenz, wird der einzelne Solldatensatz nach Installation in grün mit dem Vermerk "(Installation erfolgreich durchgeführt)" angezeigt. $ $ Wird für einen Solldatensatz keine gültige Lizenz gefunden erscheint dieser in rot mit dem Vermerk "(**Installation nicht durchgeführt, falsche/keine gültige Lizenz**)". iidie Protokolldatei wird nach Abschluss des Installationsvorgangs in das Verzeichnis C:\Dokumente und Einstellungen\User\Lokale Einstellungen\Temp gespeichert.!! Bei Fehlermeldungen die Protokolldatei an den Service schicken. 6. Nach Abschluss des Installationsvorgangs muss der Rechner neu gestartet werden. iieventuell im Rechner befindliche Lizenzdiskette vor dem Neustart entfernen. Fig. 14: Installationsprotokoll Solldaten 4. Das Protokollfenster für die Solldateninstallation wird angezeigt.
10 en 10 KDS II/ KDS 3D-Devices Contents 1. Precondition Dongle Logon Programs Installation software Installation licence Installation medium 5 2. System software CD/ DVD Wheel aligner manufacturer Vehicle manufacturer Download Installation program 7 3. Target data CD/ DVD Wheel aligner manufacturer Vehicle manufacturer Download Installation program 8
11 Precondition KDS II/ KDS 3D-Devices 11 en 1. Precondition 1.1 Dongle 1.3 Programs Close all running programs before installation: 1. Close the wheel alignment program. 2. Click with the right mouse key in the taskbar on the program icons for ILSV, Licence, Demo, CCD or 3D server and IR remote control and close them by clicking on "Exit" in the menu. 1.4 Installation software The installation software for wheel alignment systems (installation and update) consists of: Fig. 1: Dongle (interface LPT) System software (= wheel alignment program) Target data software Fig. 2: Dongle (interface USB) 1.5 Installation licence!! In addition to the hardware licence (dongle) the software licence is absolutely essential for the installation. Check that the dongle is connected to the appropriate interface (LPT or USB) of the computer.!! Dongle: The dongle contains the hardware licence of the wheel alignment system. Each device has its own licence. The license is mandatory for the software installation and the operation. 1.2 Logon 1. Connect the wheel alignment system to the mains. 2. Turn on the device at the main switch. 3. The computer boots. 4. If the operating system displays the logon screen, the logon must be done with the user account "BBService" (password: admin) or "dguser". 5. The wheel alignment program starts automatically (if the software is already installed). iilogon: The operating system starts with or without logon depending on version of the wheel alignment system: $ $ Starts the operating system without logon the user account with administrator rights is automatically used. $ $ Starts the system with logon an user account with administrator rights ("BBService" or "dguser") must be switched manually.!! Rights: For software installation administrator rights are absolutely essential. The software license is required for system and target data. The licence can be used for: Single software package (system or target data) Combined package (system and target data) The licence can be provided as: Single licence (one wheel alignment system) Multiple licence (several wheel alignment systems, e.g. vehicle manufacturer) iithe multiple licence is mostly included in the system and target data software package for vehicle manufacturer installation. 1.6 Installation medium Depending on version of wheel alignment system the installation software and licence is availible on different media: CD/ DVD (wheel aligner manufacturer) CD/ DVD (vehicle manufacturer) Disk (only for software licence) Download internet (wheel aligner manufacturer) Download network (vehicle manufacturer) iidownload internet: $ $ Address: $ $ Select Software Center (refer also to manual for Software Center). iidownload network: refer to vehicle manufacturer.
12 en 12 KDS II/ KDS 3D-Devices System software 2. System software 2.1 CD/ DVD Wheel aligner manufacturer 1. Insert the system software CD/ DVD in the computer drive. The selection menu of the CD/ DVD will start automatically. iiif the menu does not start automatically call up the file AutoRunExec.exe in the root directory of the CD/ DVD. 2.2 Download 1. Copy the file (installation and/ or licence) downloaded from internet or company`s network to a storage medium (e.g. USB stick). 2. Connect the storage medium to the wheel alignment system PC. 3. Click on the installation file of the medium in the explorer. 4. The installation program is extracted. Fig. 3: Button "Setup + Update" in the selection menu 2. Select the button Setup + Update in the menu. 3. The installation program starts. iithe installation manual is opened via the Button Manual Vehicle manufacturer 1. Insert the system software CD/ DVD in the computer drive. The CD/ DVD will start automatically according to the manufacturer. 2. Choose the installation programm in the selection menu or click on the installation file in the explorer. 3. The installation program is extracted. Fig. 5: Extracting the installation program 5. The installation program starts. Fig. 4: Extracting the installation program 4. The installation program starts.
13 System software KDS II/ KDS 3D-Devices 13 en 2.3 Installation program iithe program guides menu driven through the installation process. Fig. 8: Request software licence 3. The request window for the software licence is displayed. Click on the button "Find..." and select the drive and the licence file (extension:.lic) in the explorer window. iithere is also the option to enter the licence key directly. iithe request window for software licence will not be opened in case of software package with multiple licence. Fig. 6: Welcome window for the system software installation 1. Click on button "Next". 4. The computer must be restarted after installation is complete. iiremove any licence disk from floppy drive before restart. i i After the installation a program entry is linked in the menu "All Programs" and a directory for the wheel alignment program is located the desktop. The software is also linked to the start-up menu and starts automatically after booting the computer. Fig. 7: Start window for the system software installation 2. Click on button "Next".
14 en 14 KDS II/ KDS 3D-Devices Target data 3. Target data 3.1 CD/ DVD Wheel aligner manufacturer 1. Insert the target data software CD/ DVD in the computer drive. The selection menu of the CD/ DVD will start automatically. iiif the menu does not start automatically call up the file AutoRunExec.exe in the root directory of the CD/ DVD. 3.2 Download 1. Copy the file (installation and/ or licence) downloaded from internet or company`s network to a storage medium (e.g. USB stick). 2. Connect the storage medium to the wheel alignment system PC. 3. Click on the installation file of the medium in the explorer. 4. The installation program is extracted. iifor extracting refer to the chapter CD/ DVD vehicle manufacturer. Fig. 9: Button "Setup + Update" in the selection menu 5. The installation program starts. 3.3 Installation program 2. Select the button Setup + Update in the menu. 3. The installation program starts. iithe program menu guides through the installation. iithe installation manual is opened via the Button Manual Vehicle manufacturer 1. Insert the CD/ DVD in the computer drive. The CD/ DVD will start automatically according to the manufacturer. 2. Select the installation programm in the selection menu or click on the installation file in the explorer. 3. The installation program is extracted. Fig. 11: Welcome window for target data software installation 1. Click on button "Next". Fig. 10: Extracting the installation program 4. The installation program starts. Fig. 12: Start window for target data software installation 2. Click on button "Next".
15 Target data KDS II/ KDS 3D-Devices 15 en 5. The installation program compares all target data sets provided on CD/ DVD or download file with the entries in the software licence. If they match (= valid licence)the corresponding target data set is installed. Fig. 13: Request of new licence file for installation or update 3. The request window for the software licence is displayed: $ $ Click on button Yes (installation or update): Select the drive and licence file (extension:.lic) in the explorer window. $ $ Click on button "No" (reinstallation): The installation program looks for an existing software licence on the wheel alignment system computer and carry out a target data installation according to this software licence. iithe installation report informs about: $ $ Serial number of wheel alignment system. $ $ Installation mode (installation/ update). $ $ Start and endtime of installation. $ $ Installation status for each set of target data. iiinstallation status: $ $ If the installation program finds a valid licence the single target data set is displayed in green letter and with the note: "(Installation successful done)". $ $ If no valid licence for a target data set is found letter are in red with the note: "(**Installation failed, wrong/ missing valid licence**)". iithe log file is saved after the installation process into the directory: C:\Documents and Settings\ User\Local Settings\Temp.!! In case of error messages the log file must be send to the service. 6. After installation process is complete the computer must be restarted. iiremove any licence disk from floppy drive before restart. Fig. 14: Installation log file for target data 4. The log file window for target data installation is displayed.
16
17 Ihr Händler vor Ort: Local distributor: Ein Unternehmen der Bosch-Gruppe A Bosch Group Company Hanauer Straße München (Munich, Bavaria) Germany Tel Fax / sales@beissbarth.com
Inhaltsverzeichnis. KDS II / KDS 3D-Geräte 1
KDS II / KDS 3D-Geräte 1 de Inhaltsverzeichnis 1. Voraussetzung 2 1.1 Dongle 2 1.2 Anmeldung 2 1.3 Programme 2 1.4 Installationssoftware 2 1.5 Installationslizenz 2 1.6 Installationsmedium 2 2. System
Produktinformation _185PNdeen
Produktinformation 201407_185PNdeen Solldaten-UPGRADE Juli 2014 WA 900 / 920 / 020 / 950 / 970 CURA S 800 / 860 / 060 / 900 / 960 WAB01 / WAB 02 CCT CURA R1200 / CURA R2000/ API R2000 BOSCH FWA 51x Auf
EMCO Installationsanleitung / Installation instructions
EMCO Installationsanleitung / Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe / Edition B 2012-03
Nachdem Sie die Datei (z.b. t330usbflashupdate.exe) heruntergeladen haben, führen Sie bitte einen Doppelklick mit der linken Maustaste darauf aus:
Deutsch 1.0 Vorbereitung für das Firmwareupdate Vergewissern Sie sich, dass Sie den USB-Treiber für Ihr Gerät installiert haben. Diesen können Sie auf unserer Internetseite unter www.testo.de downloaden.
Installation und Einrichtung unter Windows 7/8/10. Installation and configuration for Windows 7/8/10
AFS-Client Installation und Einrichtung unter Windows 7/8/10 Installation and configuration for Windows 7/8/10 18.04.2018 kim.uni-hohenheim.de kim@uni-hohenheim.de Bitte sowohl diese Anleitung als auch
Softwareupdate-Anleitung // Porty L 600 / Porty L 1200
Softwareupdate-Anleitung // Porty L 600 / Porty L 1200 1 Softwareupdate-Anleitung // Porty L 600 / Porty L 1200 HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
Installation Manual. Driver Installation USB-to-Serial Adapter WE2111. A en/de
Installation Manual English Deutsch Driver Installation USB-to-Serial Adapter WE2111 A4012-1.0 en/de USB-to-Serial Adapter English 2 A4012-1.0 en/de USB-to-Serial Adapter 1 Installation in Windows 7...
ReadMe zur Installation der BRICKware for Windows, Version 6.1.2. ReadMe on Installing BRICKware for Windows, Version 6.1.2
ReadMe zur Installation der BRICKware for Windows, Version 6.1.2 Seiten 2-4 ReadMe on Installing BRICKware for Windows, Version 6.1.2 Pages 5/6 BRICKware for Windows ReadMe 1 1 BRICKware for Windows, Version
EMCO Installationsanleitung Installation instructions
EMCO Installationsanleitung Installation instructions Installationsanleitung Installation instructions Digitalanzeige digital display C40, FB450 L, FB600 L, EM 14D/17D/20D Ausgabe Edition A 2009-12 Deutsch...2
Word-CRM-Upload-Button. User manual
Word-CRM-Upload-Button User manual Word-CRM-Upload for MS CRM 2011 Content 1. Preface... 3 2. Installation... 4 2.1. Requirements... 4 2.1.1. Clients... 4 2.2. Installation guidelines... 5 2.2.1. Client...
Tube Analyzer LogViewer 2.3
Tube Analyzer LogViewer 2.3 User Manual Stand: 25.9.2015 Seite 1 von 11 Name Company Date Designed by WKS 28.02.2013 1 st Checker 2 nd Checker Version history Version Author Changes Date 1.0 Created 19.06.2015
JTAGMaps Quick Installation Guide
Index Index... 1 ENGLISH... 2 Introduction... 2 Requirements... 2 1. Installation... 3 2. Open JTAG Maps... 4 3. Request a free JTAG Maps license... 4 4. Pointing to the license file... 5 5. JTAG Maps
Softwareupdate-Anleitung // AC Porty L Netzteileinschub
1 Softwareupdate-Anleitung // AC Porty L Netzteileinschub Softwareupdate-Anleitung // AC Porty L Netzteileinschub HENSEL-VISIT GmbH & Co. KG Robert-Bunsen-Str. 3 D-97076 Würzburg-Lengfeld GERMANY Tel./Phone:
Karten aktualisieren Don t Panik
Karten aktualisieren Don t Panik 1. Starten Sie Ihr Gerät und schalten Sie das Navigationsprogramm ein. 2. Klicken Sie auf das "Menü": 3. Klicken Sie anschließend auf "Einstellungen": 4. Bewegen Sie den
MANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE
MANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE 2 PHONE SUITE MANUAL PHONE SUITE MANUAL 3 RESERVATION Technical Data is subject to change without notice. Changes, errors and misprints may not
Technische Information
deutsch Software-Update ZAdyn4C 1 Software auf der Speicherkarte speichern Die Software muss auf einer Speicherkarte gespeichert werden. Gehen Sie dazu folgendermaßen vor: " Die ZIP-Datei "D3359Axx" lokal
iid software tools QuickStartGuide iid USB base driver installation
iid software tools QuickStartGuide iid software tools USB base driver installation microsensys Nov 2016 Introduction / Einleitung This document describes in short form installation of the microsensys USB
Technical Information
Firmware-Installation nach Einbau des DP3000-OEM-Kits Dieses Dokument beschreibt die Schritte die nach dem mechanischen Einbau des DP3000- OEM-Satzes nötig sind, um die Projektoren mit der aktuellen Firmware
Installation und Start der Software AQ2sp Installation and Start of the software AQ2sp
Installation and Start of the software Abhängig von Ihrer WINDOWS-Version benötigen Sie Administrator-Rechte zur Installation dieser Software. Geeignet für folgende WINDOWS-Versionen: Windows 98 SE Windows
VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016
Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download
ONLINE LICENCE GENERATOR
Index Introduction... 2 Change language of the User Interface... 3 Menubar... 4 Sold Software... 5 Explanations of the choices:... 5 Call of a licence:... 7 Last query step... 9 Call multiple licenses:...
FIRMWARE UPDATE TAPMOTION TD
FIRMWARE UPDATE TAPMOTION TD CMP-SPF TO WHOM IT MAY CONCERN Seite 1 von 9 Inhalt / Overview 1. Firmware überprüfen und Update-file auswählen / Firmware check and selection of update file 2. Update File
USB -> Seriell Adapterkabel Benutzerhandbuch
USB -> Seriell Adapterkabel Benutzerhandbuch 1. Produkt Eigenschaften 1 2. System Vorraussetzungen 1 3. Treiber Installation (Alle Windows Systeme) 1 4. Den COM Port ändern 2 5. Einstellen eines RS232
Anleitung zur Verwendung des Update-Tools für
English version see below (page 10) Anleitung zur Verwendung des Update-Tools für - KW DDC Steuergeräte - KW DDC WLAN Module - KW DLC Steuergeräte - KW DLC WLAN Module Bitte beachten Sie: jedes Steuergerät
Parameter-Updatesoftware PF-12 Plus
Parameter-Updatesoftware PF-12 Plus Mai / May 2015 Inhalt 1. Durchführung des Parameter-Updates... 2 2. Kontakt... 6 Content 1. Performance of the parameter-update... 4 2. Contact... 6 1. Durchführung
SensoDirect 150. Lovibond Water Testing. Data Retrieve Software SW E2005. Tintometer Group. ph/orp DO CD/TDS. Bedienungsanleitung. Instruction Manual
Lovibond Water Testing Tintometer Group SensoDirect 150 Data Retrieve Software SW E2005 DE GB Bedienungsanleitung Seite 2 5 Instruction Manual Page 5 7 CD/TDS ph/orp DO www.lovibond.com DE Inhaltsverzeichnis
Installationsanweisung Installation Instructions Notice d installation. Instrucciones de montaje Istruzioni per l installazione. Programm Update.
Installationsanweisung Installation Instructions Notice d installation Instrucciones de montaje Istruzioni per l installazione Programm Update für FWA510 / FWA515 Program update for FWA510 / FWA515 1 2
VPN-Client Apple macos El Capitan (10.11)
VPN-Client Apple macos El Capitan (10.11) Konfiguration und Installation des internen VPN-Clients und Cisco AnyConnect VPN-Clients Configuring and installing the internal VPN client and Cisco AnyConnect
User Manual BB-anywhere
User Manual BB-anywhere LOGIN PROCEDURE 1. Click the Start button, choose All Programs (right above the search box) and select BB-ANYWHERE from the Start menu: BB-anywhere in a nutshell Regardless whether
VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL USER GUIDE June 2016
Overview The Hamburg Süd VGM Web portal is an application that enables you to submit VGM information directly to Hamburg Süd via our e-portal Web page. You can choose to enter VGM information directly,
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
BLK-2000. Quick Installation Guide. English. Deutsch
BLK-2000 Quick Installation Guide English Deutsch This guide covers only the most common situations. All detail information is described in the user s manual. English BLK-2000 Quick Installation Guide
v i r t u A L C O M P o r t s
v i r t u A L C O M P o r t s (HO720 / HO730) Installieren und Einstellen Installation and Settings Deutsch / English Installieren und Einstellen des virtuellen COM Ports (HO720 / HO730) Einleitung Laden
Quick Guide Home Network Mode
Quick Guide Home Network Mode English > 1 German > 3 About the Home Network Mode EN Tivizen Nano & iplug normally work on their own created networks (whose SSID starts with tivizentv or iplug ) in which
ALL1681 Wireless 802.11g Powerline Router Quick Installation Guide
ALL1681 Wireless 802.11g Powerline Router Quick Installation Guide 1 SET ALL1681 Upon you receive your wireless Router, please check that the following contents are packaged: - Powerline Wireless Router
Produktinformation _212PNdeen
Produktinformation 201507_212PNdeen Deutsch Seite 1 6 English page 6 12 Solldaten-Upgrade Achsvermessung JULI 2015 WA 900 / 920 / 020 / 950 / 970 CURA S 800 / 860 / 060 / 900 / 960 WAB01 / WAB 02 CCT /
PeakTech Zeitprogramm erstellen über Excel - Beispiel / Timed programs with Excel Example
PeakTech 6180 Zeitprogramm erstellen über Excel - Beispiel / Timed programs with Excel Example 1. Excel Datei erstellen / Create Excel file Öffnen Sie Excel und erstellen eine xls-datei unter einem beliebigen
Monitor & Camera Upgrading Procedure for Ctronics 9 Touch
English VERSION: Monitor & Camera Upgrading Procedure for Ctronics 9 Touch Screen Home Surveillance System CTNK-W02C *LINK:http://www.ctronicssecuritycameras.com/shop/4ch-nvr-system/touch-screenctronics-
USB-Stick (USB-Stick größer 4G. Es ist eine größere Partition notwendig als die eines 4GB Rohlings, der mit NTFS formatiert wurde)
Colorfly i106 Q1 System-Installations-Tutorial Hinweise vor der Installation / Hit for preparation: 准 备 事 项 : 外 接 键 盘 ( 配 套 的 磁 吸 式 键 盘 USB 键 盘 通 过 OTG 插 发 射 器 的 无 线 键 盘 都 可 ); U 盘 ( 大 于 4G 的 空 白 U 盘,
USB Treiber updaten unter Windows 7/Vista
USB Treiber updaten unter Windows 7/Vista Hinweis: Für den Downloader ist momentan keine 64 Bit Version erhältlich. Der Downloader ist nur kompatibel mit 32 Bit Versionen von Windows 7/Vista. Für den Einsatz
ADD ON 1 MediBalance Pro-Software muss installiert sein. must be installed.
Befundung und Training Test and Training ADD ON 1 MediBalance Pro-Software muss installiert sein. must be installed. Gleichgewicht / Balance Schwindeltraining / vertigo training Koordination / Coordination
Evaluation Kit Engineer 2.0
Kurzanleitung Funk-Schnappschalter Funk-Wippschalter Volumenmodell-Generator Empfänger USB-Kabel Atennenhülse Bitte lesen Sie vor der Inbetriebnahme unbedingt die beiliegende Kurzanleitung Erste Schritte
Ingenics Project Portal
Version: 00; Status: E Seite: 1/6 This document is drawn to show the functions of the project portal developed by Ingenics AG. To use the portal enter the following URL in your Browser: https://projectportal.ingenics.de
Cameraserver mini. commissioning. Ihre Vision ist unsere Aufgabe
Cameraserver mini commissioning Page 1 Cameraserver - commissioning Contents 1. Plug IN... 3 2. Turn ON... 3 3. Network configuration... 4 4. Client-Installation... 6 4.1 Desktop Client... 6 4.2 Silverlight
Configuring and installing the Cisco AnyConnect VPN client
VPN-Client Linux Konfiguration und Installation des Cisco-AnyConnect VPN-Clients Configuring and installing the Cisco AnyConnect VPN client 17. Juli 2017 kim.uni hohenheim.de kim@uni hohenheim.de Über
8 Intensotab - Android 4.0 ICE CREAM SANDWICH Update
8 Intensotab - Android 4.0 ICE CREAM SANDWICH Update Deutsche Anleitung zur Durchführung des Firmware Updates: Seite 2-10 English instruction guide for installing the firmware update: Page 11-17 1 Anleitung
Installations-Anleitung
Installations-Anleitung OS6.0 - Bedieneroberfläche Installation für PC-Systeme mit Windows 7, 8.1 oder 10 PC System Inhalte: Installation der OS6.0 Software Installation des Gerätetreibers motrona GmbH,
LimbLogic Communicator. Clever verbunden. Software Installation
LimbLogic Communicator Clever verbunden. Software Installation DE LimbLogic Communicator Software Installation Schließen Sie den Communicator nicht an den PC an, bis Sie dazu aufgefordert werden. Hardware-
Readme-USB DIGSI V 4.82
DIGSI V 4.82 Sehr geehrter Kunde, der USB-Treiber für SIPROTEC-Geräte erlaubt Ihnen, mit den SIPROTEC Geräten 7SJ80/7SK80 über USB zu kommunizieren. Zur Installation oder Aktualisierung des USB-Treibers
I am starting on Page 4 and assuming that the person has DECODERPROGGRAMMER manual.
I am starting on Page 4 and assuming that the person has DECODERPROGGRAMMER manual. If you already use the Digital Plus USB interface: Before you install the software for the decoder programmer, back up
Software BC Flash. Firmware für VAS 5903 / 5905 aktualisieren. Software BC Flash. Update Firmware for VAS 5903 / 5905. Bedienungsanleitung Software
Software BC Flash Firmware für VAS 5903 / 5905 aktualisieren Software BC Flash Update Firmware for VAS 5903 / 5905 D GB Bedienungsanleitung Software Operating Instructions Software 42,0410,1534 012008
SOUND LINK ANALYSIS SOFTWARE BEDIENUNGSANLEITUNG USER MANUAL. Für weiteren Gebrauch aufbewahren! Keep this manual for future needs!
BEDIENUNGSANLEITUNG USER MANUAL SOUND LINK ANALYSIS SOFTWARE Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! Copyright Nachdruck verboten! Reproduction prohibited! Inhaltsverzeichnis/
Quick Installation Guide for 4 and 7-Port Broadband Router
Quick Installation Guide for 4 and 7-Port Broadband Router A. Hardware Installation 1. Setup LAN connection: connect an Ethernet cable from your computer s Ethernet port to one of the LAN ports of this
NEWSLETTER. FileDirector Version 2.5 Novelties. Filing system designer. Filing system in WinClient
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
FEBE Die Frontend-Backend-Lösung für Excel
FEBE Die Frontend--Lösung für FEBE Die Frontend--Lösung für FEBE.pptx 8.04.206 0:43 FEBE Die Frontend--Lösung für Nutzer A alle_aufträge neuer_auftrag Auftragsänderung Nutzer B alle_aufträge neuer_auftrag
Update Anleitung Access-Server S Access-Server M. Update instructions Access Server S Access Server M AS 670-01 S AS 670-01 M
Update Anleitung Access-Server S Access-Server M Update instructions Access Server S Access Server M AS 670-01 S AS 670-01 M Deutsch Anwendung Diese Anleitung richtet sich an Access Certified Partner (ACP)
How-To-Do. OPC-Server with MPI and ISO over TCP/IP Communication. Content. How-To-Do OPC-Server with MPI- und ISO over TCP/IP Communication
How-To-Do OPC-Server with MPI and ISO over TCP/IP Content OPC-Server with MPI and ISO over TCP/IP... 1 1 General... 2 1.1 Information... 2 1.2 Reference... 2 2 Procedure for the Setup of the OPC Server...
Produktinformation _147PNdeen
Produktinformation 201105_147PNdeen Neue Software für die TOUCH PC Auswuchtmaschinen BM 35 Touch, BM 45 Touch, BM 55 Touch Mit der Einführung der BM 11 Touch in die Nussbaum Produktlinie der Rad Auswuchtmaschinen
Anleitung zur Schnellinstallation TFM-PCIV92A B1.21
Anleitung zur Schnellinstallation TFM-PCIV92A B1.21 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 6 Version 05.11.2011 1. Bevor Sie anfangen Packungsinhalt ŸTFM-PCIV92A
Kurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen
Kurzanleitung um Transponder mit einem scemtec TT Reader und der Software UniDemo zu lesen QuickStart Guide to read a transponder with a scemtec TT reader and software UniDemo Voraussetzung: - PC mit der
Technische Information. Toolset Software und Cosworth Geräte
Technische Information Technical Information 07/2014 911 GT3 Cup (991) Toolset Software und Cosworth Geräte Toolset software and Cosworth devices Fahrzeug / Vehicle: 911 GT3 Cup (991) Bauteil / Part: ICD
KURZANLEITUNG. Firmware-Upgrade: Wie geht das eigentlich?
KURZANLEITUNG Firmware-Upgrade: Wie geht das eigentlich? Die Firmware ist eine Software, die auf der IP-Kamera installiert ist und alle Funktionen des Gerätes steuert. Nach dem Firmware-Update stehen Ihnen
Anweisungen zur Aktualisierung der IOP Firmware und Software
Anweisungen zur Aktualisierung der IOP Firmware und Software Einschränkungen Für die Aktualisierung der Firmware und Software des SINAMICS Intelligent Operator Panels (IOP) gelten die folgenden Einschränkungen:
DSP CONTROL. Version 2.0 INSTALLATIONSANLEITUNG INSTALLATION MANUAL. Für weiteren Gebrauch aufbewahren! Keep this manual for future needs!
INSTALLATIONSANLEITUNG INSTALLATION MANUAL DSP CONTROL Version 2.0 Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! Copyright Nachdruck verboten! Reproduction prohibited! Inhaltsverzeichnis/
Quick Installation Guide
LevelOne WHG-1000 300Mbps Wireless PoE Hotspot Gateway Quick Installation Guide English Deutsch Table of Contents English... 3 Deutsch... 13 Default Settings IP Address-LAN1 192.168.1.254 IP Address-LAN2
UNIGATE CL Konfiguration mit WINGATE
UNIGATE CL Konfiguration mit WINGATE - UNIGATE CL Configuration via WINGATE Art.-Nr.: V3928 Deutschmann Automation GmbH & Co. KG Carl-Zeiss-Str. 8 D-65520 Bad Camberg Phone: +49-(0)6434-9433-0 Hotline:
SINAMICS Intelligent Operator Panel (IOP)
SINAMICS Intelligent Operator Panel (IOP) Anweisungen zur Installation der IOP Firmware und Software Ausgabe: September 2014 Technische Änderungen vorbehalten Page Siemens AG 2014 Subject to change without
1 Allgemeines (Windows)
PLOT 6.2 (WINDOWS) 1 Allgemeines (Windows) Anbei erhalten Sie ein Liefermedium mit der Software von PLOT 6.2 Im folgenden finden Sie beschrieben, wie die Software zu installieren ist. Weitergehende Informationen
Installation Guide/ Installationsanleitung. Spring 16 Release
Guide/ Installationsanleitung Spring 16 Release Visit AppExchange (appexchange.salesforce.com) and go to the CONNECT for XING listing. Login with your Salesforce.com user is required. Click on Get It Now.
Bosch iqn-mapper. Tool Description Werkzeug-Beschreibung
Bosch iqn-mapper en de Tool Description Werkzeug-Beschreibung iqn-mapper Introduction en 3 1 Introduction 2 Installation 3 Operation Bosch iqn-mapper is a tool to map replay clients to NetApp iscsi systems.
Special Documentation Activation Instructions
SD02058S/04/A2/01.17 71367354 Products Solutions Services Special Documentation Activation Instructions Aktivierungsanleitung DeviceCare SFE100 Lizenzmodell (Aktivierungsanleitung) Activation Instructions
Installations-Anleitung JetCalc und Komponenten. Manual for JetCalc and components
Installations-Anleitung JetCalc und Komponenten Manual for JetCalc and components Version 1.0 Datum: 11. April 2006 2 Inhaltsverzeichnis 1 Herunterladen Software / Download software 3 1.1 JetCalc 3 1.2.net
Gamperl & Hatlapa GmbH Modem/WiFi settings
1. Log in - Anmelden Pic001 device front / Gerätevorderseite Pic002 Login screen / Anmeldebildschirm Connect your computer to one of the Ethernetports on the front (Pic001) of the modem. Start your browser
!!! UNBEDINGT BEACHTEN!!!
Produktinformation 201501_197PAdeen Deutsch Seite 1 5 English page 6 10 Solldaten-Update Achsvermessung 2015 WA 900 / 920 / 020 / 950 / 970 CURA S 800 / 860 / 060 / 900 / 960 WAB01 / WAB 02 CCT / RoboLigner
1. Double click on the Actisys USB icon Found on Floppy A:\
WARNING:- Make sure that the ACTISYS FIR-USB adapter is not plugged in before installing this Software. ACHTUNG:- Den ACTISYS FIR-USB-Adapter KEINESFALLS vor der Installation der Software anschließen!
Kurzinformation Brief information
AGU Planungsgesellschaft mbh Sm@rtLib V4.1 Kurzinformation Brief information Beispielprojekt Example project Sm@rtLib V4.1 Inhaltsverzeichnis Contents 1 Einleitung / Introduction... 3 1.1 Download aus
4.) Geben Sie im Feld Adresse die IP Adresse des TDC Controllers ein. Die Standard Adresse lautet 192.168.1.50.
Netzwerk: 1.) Kopieren Sie die Datei C30remote.exe von der Installations CD auf ihre Festplatte. 2.) Starten Sie die Datei C30remote.exe auf ihrer Festplatte. 3.) Wählen Sie aus dem Menü Verbindung den
Anleitung zur Schnellinstallation TFM-561U
Anleitung zur Schnellinstallation TFM-561U V1 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 5 Version 08.25.2010 1. Bevor Sie anfangen Packungsinhalt TFM-561U Treiber
Yealink W52 DECT IP Telefon
Yealink W52 DECT IP Telefon Manuelle Neukonfiguration Dokumentenversion 1.0 Yealink W52 DECT IP Telefon Mauelle Neukonfiguration Copyright Hinweis Copyright 2016 finocom AG Alle Rechte vorbehalten. Jegliche
Table of Cont 6. 2 General Information... 4 Purpose...4 Documentation...4 Scope of Supply...5 Technical Data Safety Regulations...
2 General Information........................ 4 Purpose........................................4 Documentation................................4 Scope of Supply................................5 Technical
NVR Mobile Viewer for iphone/ipad/ipod Touch
NVR Mobile Viewer for iphone/ipad/ipod Touch Quick Installation Guide DN-16111 DN-16112 DN16113 2 DN-16111, DN-16112, DN-16113 for Mobile ios Quick Guide Table of Contents Download and Install the App...
Installationsanleitung für Thermodrucker D10
Installationsanleitung für Thermodrucker D10 Windows XP / Vista Für diesen Artikel benötigen Sie keine Software, da die Treiber bereits bei Windows integriert sind. Um den Drucker auszuwählen befolgen
SanStore: Kurzanleitung / SanStore: Quick reference guide
SanStore Rekorder der Serie MM, MMX, HM und HMX Datenwiedergabe und Backup Datenwiedergabe 1. Drücken Sie die Time Search-Taste auf der Fernbedienung. Hinweis: Falls Sie nach einem Administrator-Passwort
Getting started with MillPlus IT V530 Winshape
Getting started with MillPlus IT V530 Winshape Table of contents: Deutsche Bedienungshinweise zur MillPlus IT V530 Programmierplatz... 3 English user directions to the MillPlus IT V530 Programming Station...
Garmin Express Installation (Opel)
Garmin Express Installation (Opel) Deutsch Wichtiger Hinweis Diese Installation können Opel Mitarbeiter durchführen, wenn Sie die nötige Berechtigung besitzen, was in der Regel der Fall ist. Sollten Sie
Anleitung zur Schnellinstallation TFM-560X YO.13
Anleitung zur Schnellinstallation TFM-560X YO.13 Table of Contents Deutsch 1 1. Bevor Sie anfangen 1 2. Installation 2 Troubleshooting 6 Version 06.08.2011 1. Bevor Sie anfangen Packungsinhalt ŸTFM-560X
RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
OMNITRONIC DSP Control Installationsanweisungen bis Version 1.3.1
OMNITRONIC DSP Control Installationsanweisungen bis Version 1.3.1 Bitte befolgen Sie diese Schritt-für-Schritt Anleitung genau, nachdem Sie ein Software Update von unserer Website heruntergeladen haben.
SmartClass Firmware-Update Vorgehensweise
Benutzeranweisungen SmartClass Firmware-Update Vorgehensweise 2008.01 (V 1.x.x) Deutsch Please direct all enquiries to your local JDSU sales company. The addresses can be found at: www.jdsu.com/tm-contacts
150Mbps Micro Wireless N USB Adapter
150Mbps Micro Wireless N USB Adapter TEW-648UBM ŸAnleitung zur Schnellinstallation (1) ŸTroubleshooting (6) 1.11 1. Bevor Sie anfangen Packungsinhalt ŸTEW-648UBM ŸCD-ROM (Dienstprogramm & Bedienungsanleitung)
Snom 3xx/7xx Serie. Manuelle Neukonfiguration. Dokumentenversion 1.0
Snom 3xx/7xx Serie Manuelle Neukonfiguration Dokumentenversion 1.0 Snom 3xx/7xx Serie Mauelle Neukonfiguration Copyright Hinweis Copyright 2016 finocom AG Alle Rechte vorbehalten. Jegliche technische Dokumentation,
Der Adapter Z250I / Z270I lässt sich auf folgenden Betriebssystemen installieren:
Installationshinweise Z250I / Z270I Adapter IR USB Installation hints Z250I / Z270I Adapter IR USB 06/07 (Laden Sie den Treiber vom WEB, entpacken Sie ihn in ein leeres Verzeichnis und geben Sie dieses
RS-232 SERIAL EXPRESS CARD 1-PORT. Expansion 111829
RS-232 SERIAL EXPRESS CARD 1-PORT Expansion 111829 1. Introduction equip RS-232 Serial Express Card works with various types of RS-232 serial devices including modems, switches, PDAs, label printers, bar
TomTom WEBFLEET Tachograph
TomTom WEBFLEET Tachograph Installation TG, 17.06.2013 Terms & Conditions Customers can sign-up for WEBFLEET Tachograph Management using the additional services form. Remote download Price: NAT: 9,90.-/EU:
How to use the large-capacity computer Lilli? IMPORTANT: Access only on JKU Campus!! Using Windows:
How to use the large-capacity computer Lilli? IMPORTANT: Access only on JKU Campus!! Using Windows: In order to connect to Lilli you need to install the program PUTTY. The program enables you to create
SIMATIC HMI. Hotfix 1 (K ) zu WinCC V6.2 SP3. Installations- und Benutzungshinweise. Inhaltsverzeichnis
SIMATIC HMI Hotfix 1 (K6.2.3.1) zu WinCC V6.2 SP3 Installations- und Benutzungshinweise Diese Hinweise sind den Aussagen in den Handbüchern und in der Online-Hilfe in der Verbindlichkeit übergeordnet.
Installationshinweise Z501J / Z501K Adapter IrDa USB Installation hints Z501J / Z501K Adapter IrDa USB
Installationshinweise Z501J / Z501K Adapter IrDa USB Installation hints Z501J / Z501K Adapter IrDa USB 1/3.04 (Diese Anleitung ist für die CD geschrieben. Wenn Sie den Treiber vom WEB laden, entpacken
https://portal.microsoftonline.com
Sie haben nun Office über Office365 bezogen. Ihr Account wird in Kürze in dem Office365 Portal angelegt. Anschließend können Sie, wie unten beschrieben, die Software beziehen. Congratulations, you have
UCON/s UCON/s Kurzanleitung Inbetriebnahme
UCON/s UCON/s Kurzanleitung Inbetriebnahme copyright G&D 24/08/2005 Irrum und techn. Änderungen vorbehalten 1. Was Sie zur Installation benötigen - UCON/s - 1:1 belegtes CAT-x Patchkabel - CATPRO2(bei
DVD MAKER USB2.0 Installation Anleitung
DVD MAKER USB2.0 Installation Anleitung Inhalt V1.0 Kapitel 1: DVD MAKER USB2.0 Hardware Montage...2 1.1 Inhalt der DVD MAKER USB2.0 Paket...2 1.2 Systemanforderungen...2 1.3 Hardware Montage...2 Kapitel